Radiographic and clinical outcomes of second generation Trabecular Metal™ glenoid components in total shoulder arthroplasty

2020 ◽  
pp. 175857322090998
Author(s):  
Raymond E Chen ◽  
Alexander M Brown ◽  
Alexander S Greenstein ◽  
Sandeep Mannava ◽  
Ilya Voloshin
Keyword(s):  
Clinical Outcomes ◽  
Shoulder Arthroplasty ◽  
Second Generation ◽  
Total Shoulder Arthroplasty ◽  
Implant Survival ◽  
Trabecular Metal ◽  
Metal Debris ◽  
Shoulder Range Of Motion ◽  
Shoulder Range

Background Total shoulder arthroplasty with second generation porous tantalum glenoid implants (Trabecular Metal™) has shown good short-term outcomes, but mid-term outcomes are unknown. This study describes the clinical, radiographic, and patient-rated mid-term outcomes of total shoulder arthroplasty utilizing cemented Trabecular Metal™ glenoid components. Methods Patients who underwent anatomic total shoulder arthroplasty with cemented Trabecular Metal™ glenoid components for primary osteoarthritis were identified for minimum five-year follow-up. The primary outcome measure was implant survival; secondary outcome measures included patient-rated outcome scores, shoulder range of motion findings, and radiographic analysis. Results Twenty-seven patients were enrolled in the study. Twenty-one patients had full radiographic follow-up. Mean follow-up was 6.6 years. There was 100% implant survival. Shoulder range of motion significantly improved and the mean American Shoulder and Elbow Society score was 89.8. There was presence of metal debris radiographically in 24% of patients. Twenty-nine percent of patients had evidence of radiolucency. Fourteen percent of patients had moderate superior subluxation. Conclusion Total shoulder arthroplasty with second generation cemented Trabecular Metal™ glenoid components yielded good outcomes at mean 6.6-year follow-up. Metal debris incidence and clinical outcomes were similar to short-term findings. The presence of metal debris did not significantly affect clinical outcomes. Continued observation of these patients will elucidate longer-term implant survival.

scholarly journals Two-year results of a multi-centre, randomized controlled trial comparing a second-generation uncemented trabecular metal-backed versus cemented polyethylene glenoid component in total shoulder arthroplasty

2021 ◽  
Vol 2 (9) ◽  
pp. 728-736
Author(s):  
Patrick Y. K. Chin ◽  
William D. Regan ◽  
Derek Plausinis ◽  
Zane D. Zarzour ◽  
Fay Leung ◽  
...  
Keyword(s):  
Patient Reported Outcomes ◽  
Second Generation ◽  
Controlled Trial ◽  
Total Shoulder Arthroplasty ◽  
Glenoid Component ◽  
Trabecular Metal ◽  
Metal Debris ◽  
Randomized Controlled ◽  
Patient Reported

Aims To report early (two-year) postoperative findings from a randomized controlled trial (RCT) investigating disease-specific quality of life (QOL), clinical, patient-reported, and radiological outcomes in patients undergoing a total shoulder arthroplasty (TSA) with a second-generation uncemented trabecular metal (TM) glenoid versus a cemented polyethylene glenoid (POLY) component. Methods Five fellowship-trained surgeons from three centres participated. Patients aged between 18 and 79 years with a primary diagnosis of glenohumeral osteoarthritis were screened for eligibility. Patients were randomized intraoperatively to either a TM or POLY glenoid component. Study intervals were: baseline, six weeks, six-, 12-, and 24 months postoperatively. The primary outcome was the Western Ontario Osteoarthritis Shoulder QOL score. Radiological images were reviewed for metal debris. Mixed effects repeated measures analysis of variance for within and between group comparisons were performed. Results A total of 93 patients were randomized (46 TM; 47 POLY). No significant or clinically important differences were found with patient-reported outcomes at 24-month follow-up. Regarding the glenoid components, there were no complications or revision surgeries in either group. Grade 1 metal debris was observed in three (6.5%) patients with TM glenoids at 24 months but outcomes were not negatively impacted. Conclusion Early results from this RCT showed no differences in disease-specific QOL, radiographs, complication rates, or shoulder function between uncemented second-generation TM and cemented POLY glenoids at 24 months postoperatively. Revision surgeries and reoperations were reported in both groups, but none attributed to glenoid implant failure. At 24 months postoperatively, Grade 1 metal debris was found in 6.5% of patients with a TM glenoid but did not negatively influence patient-reported outcomes. Longer-term follow-up is needed and is underway. Cite this article: Bone Jt Open 2021;2(9):728–736.

scholarly journals Modern trabecular metal-backed glenoid components in total shoulder arthroplasty: What is the evidence? A systematic review

2020 ◽  
pp. 175857322091427
Author(s):  
Michael-Alexander Malahias ◽  
Dimitrios Chytas ◽  
Lazaros Kostretzis ◽  
Angelos Trellopoulos ◽  
Emmanouil Brilakis ◽  
...  
Keyword(s):  
Systematic Review ◽  
Shoulder Arthroplasty ◽  
Clinical Performance ◽  
Total Shoulder Arthroplasty ◽  
Glenoid Component ◽  
Trabecular Metal ◽  
Metal Debris ◽  
Cochrane Database

Background A number of papers have been published reporting on the clinical performance of modern trabecular metal-backed glenoid components in total shoulder arthroplasty. However, no systematic review of the literature has been published to date. Methods The US National Library of Medicine (PubMed/MEDLINE), and the Cochrane Database of Systematic Reviews and EMBASE were queried for publications from January 1980 to October 2019 utilizing keywords pertinent to total shoulder arthroplasty, trabecular metal, and clinical outcomes. Results Overall, seven articles were included for analysis (322 operated shoulders, mean follow-up range: 2–4 years). The survival rate of modern trabecular metal-backed glenoid components was 96% (309 out of 322 cases) at 43 months mean follow-up, while the rate of aseptic loosening was 0.3% (1 out of 322 cases). There were 35 cases (10.9%) with glenoid component radiolucency (one of them required revision), and 37 cases (11.5%) of metal debris formation, with four of them undergoing revision. Conclusions There was low quality evidence to show that the use of modern trabecular metal-backed glenoid components in total shoulder arthroplasty may be safe and effective at short-term follow-up. However, this analysis showed alarmingly high rates of both radiolucency of the glenoid component and metal debris formation which raise concern for potential failure of this glenoid component in the long term. Therefore, we feel that modern trabecular metal-backed glenoid components should be still used with caution as part of a structured surveillance or research program until we know if there is a detriment to the prosthesis in the medium to long term. Level: Systematic review, IV.

scholarly journals Mid-term outcomes of bony increased offset-reverse total shoulder arthroplasty in the Asian population

2021 ◽  
Vol 24 (3) ◽  
pp. 125-134
Author(s):  
Kirtan Tankshali ◽  
Dong-Whan Suh ◽  
Jong-Hun Ji ◽  
Chang-Yeon Kim
Keyword(s):  
Los Angeles ◽  
Clinical Outcomes ◽  
Shoulder Arthroplasty ◽  
Intraoperative Complications ◽  
Total Shoulder Arthroplasty ◽  
Asian Population ◽  
Reverse Total Shoulder Arthroplasty ◽  
Scapular Notching ◽  
Reverse Total Shoulder

Background: To evaluate clinical and radiological outcomes of bony increased offset-reverse total shoulder arthroplasty (BIO-RSA) in the Asian population at mid-term follow-up.Methods: From June 2012 to August 2017 at a single center, 43 patients underwent BIO-RSA, and 38 patients with a minimum of 2 years of follow-up were enrolled. We evaluated the preoperative and postoperative clinical outcomes, radiological outcomes (notching and loosening), and complications of BIO-RSA at the last follow-up. In addition, we divided these patients into notching and not-notching groups and compared the demographics, preoperative, and postoperative characteristics of patients between the two groups.Results: Visual analog scale, American Shoulder and Elbow Surgeons, University of California-Los Angeles, and Simple Shoulder Test scores improved significantly from preoperative (average: 5, 39.43, 16.22, 3.94) to postoperative (average: 1.71, 78.91, 28.34, 7.8; p<0.05) outcomes. All range of motion except internal rotation improved significantly at the final follow-up (p<0.05), and the bone graft was well-incorporated with the native glenoid in all patients (100%). However, scapular notching was observed in 20/38 patients (53%). In the comparison between notching and not-notching groups (18 vs. 20 patients), there were no significant differences in demographics, radiological parameters, and clinical outcomes except acromion-greater tuberosity (AT) distance (p=0.003). Intraoperative complications were three metaphyseal fractures and one inferior screw malposition. Postoperative complications included one heterotopic ossification, one scapula neck stress fracture, one humeral stem loosening, and one late infection.Conclusions: BIO-RSA resulted in improved clinical outcomes at mid-term follow-up in the Asian population. Although better cosmesis and advantages of glenoid lateralization were observed, we observed higher rates of scapular notching compared to previously reported rates in BIO-RSA studies. In addition, adequate glenoid lateralization with appropriate humeral lengthening (AT distance) might reduce scapular notching.

Bilateral total shoulder arthroplasty: A systematic review of clinical outcomes

2020 ◽  
pp. 175857322091682
Author(s):  
John-Rudolph H Smith ◽  
Darby A Houck ◽  
Jessica A Hart ◽  
Jonathan T Bravman ◽  
Rachel M Frank ◽  
...  
Keyword(s):  
Patient Satisfaction ◽  
Clinical Outcomes ◽  
Shoulder Arthroplasty ◽  
English Language ◽  
External Rotation ◽  
Total Shoulder Arthroplasty ◽  
Cochrane Library ◽  
Level Of Evidence ◽  
Patient Reported

Background The purpose of this study was to describe the clinical outcomes following bilateral total shoulder arthroplasty (TSA). Methods A systematic search of the PubMed, Embase, and Cochrane Library databases following PRISMA guidelines was performed. English-language literature published from 2010 to 2018 analyzing bilateral TSA (anatomic and/or reverse) with a minimum one-year follow-up was reviewed by two independent reviewers. Study quality was evaluated with the Modified Coleman Methodology Score and the methodological index for non-randomized studies score. Results Eleven studies (1 Level II, 3 Level III, 7 Level IV) with 292 patients were included. Two studies reported on bilateral anatomic TSA ( n = 54), six reported on bilateral reverse TSA (RTSA; n = 168), two reported on anatomic TSA with contralateral RTSA (TSA/RTSA; n = 31), and one compared bilateral anatomic TSA ( n = 26) and bilateral RTSA ( n = 13). Among studies, mean revision rate ranged from 0% to 10.53% and mean complication rate ranged from 4.9% to 31.3%. At final follow-up, patients experienced significant overall improvements in range of motion and patient-reported outcome score measurements. However, bilateral anatomic TSA resulted in greater improvements in external rotation compared to bilateral RTSA. Overall patient satisfaction was 91.0%. Conclusion The available data indicate that bilateral TSA allows for functional and pain improvements and result in high patient satisfaction. Level of evidence IV.

scholarly journals Anatomical total shoulder arthroplasty in young patients with osteoarthritis

2018 ◽  
Vol 100-B (4) ◽  
pp. 485-492 ◽  
Author(s):  
M. O. Gauci ◽  
N. Bonnevialle ◽  
G. Moineau ◽  
M. Baba ◽  
G. Walch ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
Polyethylene Wear ◽  
Total Shoulder Arthroplasty ◽  
Young Patients ◽  
Glenoid Component ◽  
Implant Survival ◽  
Survivorship Analysis ◽  
Kaplan Meier ◽  
Glenoid Loosening

Aims Controversy about the use of an anatomical total shoulder arthroplasty (aTSA) in young arthritic patients relates to which is the ideal form of fixation for the glenoid component: cemented or cementless. This study aimed to evaluate implant survival of aTSA when used in patients aged < 60 years with primary glenohumeral osteoarthritis (OA), and to compare the survival of cemented all-polyethylene and cementless metal-backed glenoid components. Materials and Methods A total of 69 consecutive aTSAs were performed in 67 patients aged < 60 years with primary glenohumeral OA. Their mean age at the time of surgery was 54 years (35 to 60). Of these aTSAs, 46 were undertaken using a cemented polyethylene component and 23 were undertaken using a cementless metal-backed component. The age, gender, preoperative function, mobility, premorbid glenoid erosion, and length of follow-up were comparable in the two groups. The patients were reviewed clinically and radiographically at a mean of 10.3 years (5 to 12, sd 26) postoperatively. Kaplan–Meier survivorship analysis was performed with revision as the endpoint. Results A total of 26 shoulders (38%) underwent revision surgery: ten (22%) in the polyethylene group and 16 (70%) in the metal-backed group (p < 0.0001). At 12 years’ follow-up, the rate of implant survival was 74% (sd 0.09) for polyethylene components and 24% (sd 0.10) for metal-backed components (p < 0.0002). Glenoid loosening or failure was the indication for revision in the polyethylene group, whereas polyethylene wear with metal-on-metal contact, instability, and insufficiency of the rotator cuff were the indications for revision in the metal-backed group. Preoperative posterior subluxation of the humeral head with a biconcave/retroverted glenoid (Walch B2) had an adverse effect on the survival of a metal-backed component. Conclusion The survival of a cemented polyethylene glenoid component is three times higher than that of a cementless metal-backed glenoid component ten years after aTSA in patients aged < 60 years with primary glenohumeral OA. Patients with a biconcave (B2) glenoid have the highest risk of failure. Cite this article: Bone Joint J 2018;100-B:485–92.

scholarly journals Medium to long-term results of a recessed glenoid for glenoid resurfacing in total shoulder arthroplasty

2019 ◽  
Vol 12 (1_suppl) ◽  
pp. 31-39
Author(s):  
Mark Ross ◽  
Jean-Marc Glasson ◽  
Justin Alexander ◽  
Christopher G Conyard ◽  
Benjamin Hope ◽  
...  
Keyword(s):  
Clinical Outcomes ◽  
Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Long Term Results ◽  
Shoulder Replacement ◽  
Shoulder Hemiarthroplasty ◽  
Total Shoulder Replacement ◽  
Implant Survivorship

Background Recessed mini-glenoid components provide an alternative to total shoulder replacement that may avoid some of the known shortcomings and complications associated with shoulder hemiarthroplasty or standard glenoid components in difficult cases. This study reports survivorship, radiological and clinical outcomes of a recessed mini-glenoid implant in a consecutive cohort. Methods Retrospective cohort study reporting outcomes of 28 consecutive shoulders (27 patients) following total shoulder replacement using a recessed, cemented mini-glenoid implant at two sites. Results The most frequent diagnosis was primary osteoarthritis (79%); glenoid morphology was Walch Type A (67%), B1 15%, B2 10% and C 10%. At final follow-up, pain was 16.3 (SD = 23.1), American Shoulder and Elbow Score was 64.5 (SD = 31.9) and (normalized) Constant score was 83.0 (SD = 20.7). Implant survivorship at average final follow-up of seven years (3–13) was 96.4%. Seven mini-glenoids showed small peripheral radiolucent lines at one-year X-ray follow-up but were non-progressive on subsequent imaging. Discussion Recessed polyethylene mini-glenoid is an attractive alternative for shoulder arthroplasty and provides an intermediate solution between standard glenoid components and hemiarthroplasty. Our medium to long-term results demonstrate reliable clinical outcomes, absence of glenoid erosion, low complication rate and satisfactory implant survivorship.

scholarly journals Negligible Correlation between Radiographic Measurements and Clinical Outcomes in Patients Following Primary Reverse Total Shoulder Arthroplasty

2021 ◽  
Vol 10 (4) ◽  
pp. 809
Author(s):  
Daniel P. Berthold ◽  
Daichi Morikawa ◽  
Lukas N. Muench ◽  
Joshua B. Baldino ◽  
Mark P. Cote ◽  
...  
Keyword(s):  
Clinical Outcomes ◽  
Shoulder Arthroplasty ◽  
Functional Outcomes ◽  
Total Shoulder Arthroplasty ◽  
Reverse Total Shoulder Arthroplasty ◽  
Prosthesis Design ◽  
Radiographic Measurements ◽  
Reverse Total Shoulder ◽  
Shoulder Angle

Previous attempts to measure lateralization, distalization or inclination after reverse total shoulder arthroplasty (rTSA) and to correlate them with clinical outcomes have been made in the past years. However, this is considered to be too demanding and challenging for daily clinical practice. Additionally, the reported findings were obtained from heterogeneous rTSA cohorts using 145° and 155° designs and are limited in external validity. The purpose of this study was to investigate the prognostic preoperative and postoperative radiographic factors affecting clinical outcomes in patients following rTSA using a 135° prosthesis design. In a multi-center design, patients undergoing primary rTSA using a 135° design were included. Radiographic analysis included center of rotation (COR), acromiohumeral distance (AHD), lateral humeral offset (LHO), distalization shoulder angle (DSA), lateralization shoulder angle (LSA), critical shoulder angle (CSA), and glenoid and baseplate inclination. Radiographic measurements were correlated to clinical and functional outcomes, including the American Shoulder and Elbow Surgeons (ASES), Simple Shoulder Test (STT), Single Assessment Numeric Evaluation (SANE), and Visual Analogue Scale (VAS) score, active forward elevation (AFE), external rotation (AER), and abduction (AABD), at a minimum 2-year follow-up. There was a significant correlation between both DSA (r = 0.299; p = 0.020) and LSA (r = −0.276; p = 0.033) and the degree of AFE at final follow-up. However, no correlation between DSA (r = 0.133; p = 0.317) and LSA (r = −0.096; p = 0.471) and AER was observed. Postoperative AHD demonstrated a significant correlation with final AFE (r = 0.398; p = 0.002) and SST (r = 0.293; p = 0.025). Further, postoperative LHO showed a significant correlation with ASES (r = −0.281; p = 0.030) and LSA showed a significant correlation with ASES (r = −0.327; p = 0.011), SANE (r = −0.308, p = 0.012), SST (r = −0.410; p = 0.001), and VAS (r = 0.272; p = 0.034) at terminal follow-up. All other correlations were found to be non-significant (p > 0.05, respectively). Negligible correlations between pre- and postoperative radiographic measurements and clinical outcomes following primary rTSA using a 135° prosthesis design were demonstrated; however, these observations are of limited predictive value for outcomes following rTSA. Subsequently, there remains a debate regarding the ideal placement of the components during rTSA to most sufficiently restore active ROM while minimizing complications such as component loosening and scapular notching. Additionally, as the data from this study show, there is still a considerable lack of data in assessing radiographic prosthesis positioning in correlation to clinical outcomes. As such, the importance of radiographic measurements and their correlation with clinical and functional outcomes following rTSA may be limited.

scholarly journals Short-Term Outcomes of the Grammont Reverse Shoulder Arthroplasty: Comparison between First and Second Generation Delta Prosthesis

Joints ◽  
2021 ◽  
Author(s):  
Riccardo Luigi Alberio ◽  
Marco Landrino ◽  
Paolo Fornara ◽  
Federico Alberto Grassi
Keyword(s):  
Shoulder Arthroplasty ◽  
Second Generation ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Radiographic Evaluation ◽  
Glenoid Component ◽  
Consecutive Series ◽  
Short Term ◽  
Component Loosening

Abstract Purpose This article compares short-term outcomes of two series of patients, who underwent reverse total shoulder arthroplasty (RTSA) with two different implants, both based on Grammont's principles: the Delta III (D-3) and the Delta Xtend (D-XT) prostheses. Methods The D-3 group included a consecutive series of 26 patients (mean age 75 years), that were treated between 2000 and 2006; the D-XT group included a consecutive series of 31 patients (mean age 72.5 years), for a total of 33 implants performed between 2011 and 2015. In both groups the most common diagnoses were cuff tear arthropathy (18 and 22 shoulders, respectively) and malunion of proximal humerus fractures (3 and 5). All procedures were performed by the same surgeon. Constant–Murley score (CMS) was used to assess clinical and functional outcomes. Radiographic evaluation included the true anteroposterior and axillary views. Results Twenty-three patients of the D-3 group and 22 patients (24 shoulders) of the D-XT group were evaluated at a mean follow-up of 42 months (range 26–84) and 44 months (range 26–66), respectively. Four complications occurred in the D-3 group (1 partial deltoid detachment, 1 dislocation, and 2 glenoid component loosening), while one early postoperative infection occurred in the D-XT group. Increases in elevation and CMS between preoperative and postoperative period were observed in both groups; only the D-XT group showed a slight improvement in rotations. The incidence of scapular notching was significantly different between the two groups: 100% for D-3 and 22.2% for D-XT in patients with a minimum follow-up of 5 years. Conclusion Prosthetic design evolution and greater acquaintance with this surgery have undoubtedly led to an improvement in short-term outcomes with second generation implants of RTSA. Future studies will have to ascertain whether newer implants, relying on biomechanical solutions alternative to Grammont's original concept, might provide additional advantages and minimize drawbacks.

Sign in / Sign up

Export Citation Format

Share Document