Influence of paper surface characteristics on digital printing quality

2014 ◽  
Vol 30 (7) ◽  
pp. 529-534 ◽  
Author(s):  
M. Ataeefard
Keyword(s):  
Surface Characteristics ◽  
Digital Printing ◽  
Paper Surface ◽  
Printing Quality

Research on the Impact of Surface Characteristic of Paper on Digital Printing Color Reproduction

2012 ◽  
Vol 549 ◽  
pp. 610-614
Author(s):  
Xue Lin Huang
Keyword(s):  
Surface Characteristics ◽  
Surface Characteristic ◽  
Digital Printing ◽  
Color Reproduction ◽  
Color Gamut ◽  
Printing Quality ◽  
Color Rendering ◽  
The Impact

The different paper has the different Surface Characteristic, which has the different influences on the printing color Reproduction. Through the paper printability, the color gamut experiments of digital printing, The influence of surface characteristics of paper on digital printing color reproduction was analyzed according to color rendering ability, The results indicated that the printed matter had better color efficiency, greater color gamut and smaller hue error and grayscale which had higher paper smoothness and glossiness, the higher paper whiteness is in favor of color reproduction. The surface characteristic of paper limits color reproduction. To ensure printing quality, should choose better color efficiency of paper.

The Influence of Paper Factors on Digital Printing Quality

2012 ◽  
Vol 182-183 ◽  
pp. 365-368
Author(s):  
Wei Feng Jing ◽  
Wen Yan Jiang
Keyword(s):  
Experimental Method ◽  
Digital Printing ◽  
Printing Industry ◽  
Printing Quality ◽  
Quick Turnaround ◽  
Digital Prints ◽  
Better Than

Digital printing has been playing a more and more important role in printing industry for its convenient production and quick turnaround. By experimental method, the differences of digital prints with different paper were detail analyzed, includes different base weight papers of the same category, and different categories papers with the same base weight. Results showed that the printing quality of offset paper with 120 g/m2base weight was better than that of 100 g/m2, and that printing quality of art paper was better than matt art paper with the same base weight. Other characteristics of different papers were investigated too. The method and conclusion provides in this paper would be helpful for choosing appropriate material for production activities.

Digital Printing Performance of Cashmere Fabric under Acid or Alkaline Conditions

2011 ◽  
Vol 214 ◽  
pp. 240-244
Author(s):  
Yi Nong Yan ◽  
Xiang Ru Zhang ◽  
Dan Li ◽  
Jian Jian Xu
Keyword(s):  
Ph Value ◽  
Digital Printing ◽  
Dye Uptake ◽  
Printing Quality ◽  
Alkaline Conditions ◽  
Basic Reference ◽  
Minimal Damage ◽  
First Time ◽  
Pretreatment Solution

Pretreatment solution which was obtained by many experiments who had a good printing effect was used to do the digital printing experiment on the cashmere fabric. Printing performance of the cashmere fabric in different pH value was compared to improve the printing quality of the cashmere fabric. Digital printing experiments in the alkaline environment were carried out for the first time and the best pH value was found out which could ensure dye uptake, color fastness, anti-seepage property and minimal damage to cashmere fabric. The paper provided basic reference to the actual production.

scholarly journals Discussion on Redesign of Image from Digital Printing Process

2017 ◽  
Vol 2 (2) ◽  
pp. 45
Author(s):  
Mingying Luo
Keyword(s):  
Image Processing ◽  
Digital Image ◽  
Digital Technology ◽  
Processing Method ◽  
Separation Method ◽  
Digital Printing ◽  
Image Process ◽  
Digital Image Process ◽  
Printing Technology ◽  
Printing Quality

Digital printing is an indispensable link in the modern printing technology. It is the traditional pre-press process on the transition to digital technology in imaging technology, the digital printing technology. Digital printing expounds digital image process in the design means and methods and their influences on the printing quality from the angle of separation method, image processing method, etc..

Effect of Paper Surface Characteristics on Dot Gain in Ink-Jet Printing

2010 ◽  
Vol 174 ◽  
pp. 227-230 ◽  
Author(s):  
Zhen Cai Qu ◽  
Guang Xue Chen ◽  
Bao Lin Tang ◽  
Shuang Shuang Wen
Keyword(s):  
Experimental Data ◽  
Research And Development ◽  
Surface Characteristics ◽  
Experimental Data Processing ◽  
Paper Surface ◽  
Ink Jet ◽  
Dot Gain ◽  
Jet Printing ◽  
Practical Guidance ◽  
The Law

Four kinds of ink-jet papers with different surface characteristics are chosen in this paper, by the ink-jet proofing experiments, the influence of surface characteristics to dot gain is studied, and the law of dot gain with paper surface characteristics is discussed. During the experiment, surface properties including absorbency, gloss, roughness and whiteness are tested firstly; then, the standard wedge of GATF is printed on these papers in the same printing conditions; finally, the dot gain is tested by SpectroEye. After experimental data processing and analysis, dot gain curves of different ink-jet papers are concluded, the law of dot gain with ink-jet paper surface characteristics is summarized. The results show that dot gain is different in different paper, the evaluation of 3# is the best; dot gain is also different with different colors in the same paper, and it is serious in cyan but light in yellow; the biggest dot gain appears in different contrast with different colors, cyan appears near the 65% dot area. The result of this paper offers a certain theoretical reference and practical guidance to the selection, the research and development of ink-jet paper as well as the improvement of ink-jet qualities.

Evaluation of Quality for Ink-Jet Printing Based on Capturing Measurement and Control Elements by CCD

2010 ◽  
Vol 174 ◽  
pp. 211-214 ◽  
Author(s):  
Zhen Liu ◽  
Jian Hong ◽  
Sheng Hui Li
Keyword(s):  
Detection Method ◽  
Rapid Development ◽  
Digital Printing ◽  
Ink Jet Printing ◽  
Quality Detection ◽  
Printing Quality ◽  
Ink Jet ◽  
Jet Printing ◽  
And Control ◽  
Measurement And Control

with the rapid development of digital printing, the method and standard of quality detection for digital printing become focus of research. The main work and innovations in this paper include: ①Computer image analysis method was applied to ink-jet printing quality detection for the first time; ②Compared with traditional printing quality test, ink dot, line, color patch and MTF (Modulation Transfer Function) were selected as measurement and control elements. And the test proofs for detecting printing quality were designed; ③The detection algorithm and the overall detection process were put forward in this paper. The result of the experiment demonstrates: the detection method based on capturing measurement and control elements by CCD can accurately accomplish the objective quality evaluation for ink-jet printing. Detection method of print was improved to extend the scope of detection by this research, which could be generalized as a standard method for the detection of ink-jet printing quality.

RF-ARGON PLASMA INDUCED SURFACE MODIFICATION OF PAPER

2008 ◽  
Vol 15 (04) ◽  
pp. 503-508 ◽  
Author(s):  
HALIL TURGUT SAHIN
Keyword(s):  
Surface Modification ◽  
Glow Discharge ◽  
Vapor Phase ◽  
Elemental Carbon ◽  
Treatment Time ◽  
Argon Plasma ◽  
Surface Characteristics ◽  
Chain Scission ◽  
Photo Degradation ◽  
Paper Surface

The radio frequency (RF) argon plasma induced surface modification of paper revealed novel surface characteristics and substantially changed surface topography. It was found that RF-argon glow discharge affects surface properties resulting in photo-degradation and chain-scission mechanism on paper network structure. High-power and extended treatment time caused increasing elemental carbon, while decreasing the oxygen concentration on paper surface. However, increased hydroxyls and the creation of new carbonyl functionalities were verified by trifluoroacetoanhydride and pentafluorophenylhydrazine in vapor-phase derivatization reactions.

Describing the Influence of Ink Type on Ink Penetration and Distribution

2014 ◽  
Vol 881-883 ◽  
pp. 1451-1454
Author(s):  
Ying Li ◽  
Wen Juan Gu ◽  
Bang Gui He
Keyword(s):  
Penetration Depth ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Drying Method ◽  
Offset Printing ◽  
Laser Scanning Confocal Microscope ◽  
Paper Surface ◽  
Printing Quality ◽  
Distribution Uniformity ◽  
Printing Ink

Ink is transferred and sets onto the paper surface in the printing process, which affect printing quality and usage of ink. The objective of this experiment was to investigate the influence of ink type on ink absorption and characterize the penetration depth through quantitative analysis by Laser Scanning Confocal Microscope (LSCM). Fluorescent ink was used to observe and characterize ink penetration by LSCM. Three-dimensional images of ink pigment penetration were obtained by reconstructing all XY plane images. It could be concluded Common offset printing ink compared with UV offset printing resulted in deeper ink penetration ,uneven ink distribution and lower print density. Because the composition and drying method of UV offset printing ink and common offset printing ink were significant different, penetration depth and distribution uniformity of these two types of offset printing ink in coated paper were distinct.

Sign in / Sign up

Export Citation Format

Share Document