scholarly journals Full snapshot reconstruction in hybrid architecture antenna arrays

2020 ◽  
Vol 2020 (1) ◽  
Author(s):  
Maria Trigka ◽  
Christos Mavrokefalidis ◽  
Kostas Berberidis
Keyword(s):  
Antenna Array ◽  
Antenna Arrays ◽  
Communication Systems ◽  
Linear Array ◽  
Research Work ◽  
Hybrid Architecture ◽  
Angle Of Arrival ◽  
Music Algorithm ◽  
Array Structures ◽  
Signal Sources

AbstractIn the context of this research work, we study the so-called problem of full snapshot reconstruction in hybrid antenna array structures that are utilized in mmWave communication systems. It enables the recovery of the snapshots that would have been obtained if a conventional (non-hybrid) uniform linear antenna array was employed. The problem is considered at the receiver side where the hybrid architecture exploits in a novel way the antenna elements of a uniform linear array. To this end, the recommended scheme is properly designed so as to be applicable to overlapping and non-overlapping architectures. Moreover, the full snapshot recoverability is addressed for two cases, namely for time-varying and constant signal sources. Simulation results are also presented to illustrate the consistency between the theoretically predicted behaviors and the simulated results, and the performance of the proposed scheme in terms angle-of-arrival estimation, when compared to the conventional MUSIC algorithm and a recently proposed hybrid version of MUSIC (H-MUSIC).

scholarly journals Full Snapshot Reconstruction in Hybrid Architecture Antenna Arrays

2020 ◽  
Author(s):  
Maria Trigka ◽  
Christos Mavrokefalidis ◽  
Kostas Berberidis
Keyword(s):  
Antenna Arrays ◽  
Communication Systems ◽  
Linear Array ◽  
Research Work ◽  
Hybrid Architecture ◽  
Angle Of Arrival ◽  
Music Algorithm ◽  
Uniform Linear Array ◽  
Array Structures ◽  
Signal Sources

Abstract In the context of this research work, we study the so-called problem of full snapshot reconstruction in hybrid antenna array structures that are utilized in mmWave communication systems. It enables the recovery of the snapshots that would have been obtained if a conventional (non-hybrid) Uniform Linear Antenna (ULA) array was employed. The problem is considered at the receiver side where the hybrid architecture exploits in a novel way antenna elements of a uniform linear array. To this end, the recommended scheme is properly designed so as to be applicable to overlapping and non-overlapping architectures. Moreover, the full snapshot recoverability is addressed for two cases, namely, for time-varying and constant signal sources. Simulation results are also presented to illustrate the consistency between the theoretically predicted behaviors and the simulated results, and the performance of the proposed scheme in terms Angle-of-Arrival (AoA) estimation, when compared to the conventional MUSIC algorithm and a recently proposed hybrid version of MUSIC (H-MUSIC).

scholarly journals Full Snapshot Reconstruction in Hybrid Architecture Antenna Arrays

2020 ◽  
Author(s):  
Maria Trigka ◽  
Christos Mavrokefalidis ◽  
Kostas Berberidis
Keyword(s):  
Antenna Arrays ◽  
Communication Systems ◽  
Linear Array ◽  
Research Work ◽  
Hybrid Architecture ◽  
Angle Of Arrival ◽  
Music Algorithm ◽  
Uniform Linear Array ◽  
Array Structures ◽  
Signal Sources

Abstract In the context of this research work, we study the so-called problem of full snapshot reconstruction in hybrid antenna array structures that are utilized in mmWave communication systems. It enables the recovery of the snapshots that would have been obtained if a conventional (non-hybrid) Uniform Linear Antenna (ULA) array was employed. The problem is considered at the receiver side where the hybrid architecture exploits in a novel way the antenna elements of a uniform linear array. To this end, the recommended scheme is properly designed so as to be applicable to overlapping and non-overlapping architectures. Moreover, the full snapshot recoverability is addressed for two cases, namely, for time-varying and constant signal sources. Simulation results are also presented to illustrate the consistency between the theoretically predicted behaviors and the simulated results, and the performance of the proposed scheme in terms Angle-of-Arrival (AoA) estimation, when compared to the conventional MUSIC algorithm and a recently proposed hybrid version of MUSIC (H-MUSIC).

scholarly journals Full Snapshot Reconstruction in Hybrid Architecture Antenna Arrays

2020 ◽  
Author(s):  
Maria Trigka ◽  
Christos Mavrokefalidis ◽  
Kostas Berberidis
Keyword(s):  
Antenna Arrays ◽  
Communication Systems ◽  
Linear Array ◽  
Research Work ◽  
Hybrid Architecture ◽  
Angle Of Arrival ◽  
Music Algorithm ◽  
Uniform Linear Array ◽  
Array Structures ◽  
Signal Sources

Abstract In the context of this research work, we study the so-called problem of full snapshot reconstruction in hybrid antenna array structures that are utilized in mmWave communication systems. It enables the recovery of the snapshots that would have been obtained if a conventional (non-hybrid) Uniform Linear Antenna (ULA) array was employed. The problem is considered at the receiver side where the hybrid architecture exploits in a novel way the antenna elements of a uniform linear array. To this end, the recommended scheme is properly designed so as to be applicable to overlapping and non-overlapping architectures. Moreover, the full snapshot recoverability is addressed for two cases, namely, for time-varying and constant signal sources. Simulation results are also presented to illustrate the consistency between the theoretically predicted behaviors and the simulated results, and the performance of the proposed scheme in terms Angle-of-Arrival (AoA) estimation, when compared to the conventional MUSIC algorithm and a recently proposed hybrid version of MUSIC(H-MUSIC).

scholarly journals Principles of adaptive element spacing in linear array antennas

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Tanzeela Mitha ◽  
Maria Pour
Keyword(s):  
Antenna Arrays ◽  
Communication Systems ◽  
Linear Array ◽  
Main Idea ◽  
Phase Center ◽  
Array Configuration ◽  
Array Antennas ◽  
Center Location ◽  
Novel Approach ◽  
Array Performance

AbstractA novel approach to linear array antennas with adaptive inter-element spacing is presented for the first time. The main idea is based upon electronically displacing the phase center location of the antenna elements, which determine their relative coordinates in the array configuration. This is realized by employing dual-mode microstrip patch antennas as a constitutive element, whose phase center location can be displaced from its physical center by simultaneously exciting two modes. The direction and the amount of displacement is controlled by the amplitude and phase of the modes at the element level. This in turn facilitates reconfiguring the inter-element spacing at the array level. For instance, a uniformly-spaced array could be electronically transformed into a non-uniform one without any mechanical means. The proposed idea is demonstrated in two- and three-element linear antenna arrays. The technique has the potential to control the radiation characteristics such as sidelobe levels, position of the nulls, and the beamwidths in small arrays, which are useful for adaptively controlling the array performance in emerging wireless communication systems and radars.

scholarly journals Single-element based ultra-wideband antenna array concepts for wireless high-precision 2-D local positioning

2013 ◽  
Vol 11 ◽  
pp. 297-305 ◽  
Author(s):  
M. Gardill ◽  
G. Fischer ◽  
R. Weigel ◽  
A. Koelpin
Keyword(s):  
Antenna Array ◽  
High Precision ◽  
Antenna Arrays ◽  
Ultra Wideband ◽  
Antenna Element ◽  
Single Element ◽  
Angle Of Arrival ◽  
Wideband Antenna ◽  
Local Positioning System ◽  
5 Ghz

Abstract. We generally categorize the approaches for ultra-wideband antenna array design, and consequently propose simplified concepts for antenna arrays for a high-precision, ultra-wideband FMCW radar 2-D local positioning system to obtain robustness against multi path interference, perform angle of arrival analysis, as well as instantaneous heading estimation. We focus on low-cost and mechanical robust, industrial-application ready antennas. The antenna arrays are optimized for operation in the 5 GHz to 8 GHz frequency range and are designed towards supporting full omnidirectional 360° as well as partial half-plane direction of arrival estimation. Two different concepts for vehicle- as well as wall-mounted antenna array systems are proposed and discussed. We propose a wideband unidirectional bow-tie antenna array element having 97% impedance and 37% pattern bandwidth and a robust vehicle mounted omnidirectional antenna element having more than 85% impedance and pattern bandwidth.

scholarly journals A Review of Antenna Array Technologies for Point-to-Point and Point-to-Multipoint Wireless Communications at Millimeter-Wave Frequencies

2021 ◽  
Vol 2021 ◽  
pp. 1-18
Author(s):  
G. Federico ◽  
D. Caratelli ◽  
G. Theis ◽  
A. B. Smolders
Keyword(s):  
Wireless Communications ◽  
Antenna Array ◽  
Antenna Arrays ◽  
Communication Systems ◽  
High Gain ◽  
Multimedia Services ◽  
Ongoing Research ◽  
Array Technology ◽  
Point To Point ◽  
Technical Solutions

With the introduction of 5G communication systems operating in the mm-wave frequency range, new opportunities in terms of multimedia services and applications will become available. For this to happen, several technical challenges from an antenna standpoint need to be addressed. The achievements of high-gain characteristics and agile beamforming with wide-scan capabilities are the main targets of the ongoing research on mm-wave antenna arrays. In this paper, an up-to-date overview of antenna array technology for wireless communications at mm-wave frequencies is given. Particular focus is put on the review of the state-of-the art and most advanced antenna array concepts for point-to-point and point-to-multipoint radio links at said frequencies. Various figures of merit are assessed for a comprehensive analysis and bench marking of the technical solutions investigated in the presented survey.

scholarly journals Effects of Narrow Beam Phased Antenna Arrays over the Radio Channel Metrics, Doppler Power Spectrum, and Coherence Time, in a Context of 5G Frequency Bands

2021 ◽  
Vol 11 (21) ◽  
pp. 10081
Author(s):  
Brian J. Sánchez ◽  
David H. Covarrubias ◽  
Leonardo F. Yepes ◽  
Marco A. Panduro ◽  
Elizvan Juárez
Keyword(s):  
Power Spectrum ◽  
Antenna Array ◽  
Antenna Arrays ◽  
Communication Systems ◽  
Radio Channel ◽  
Coherence Time ◽  
Narrow Beam ◽  
Frequency Bands ◽  
Phased Antenna Array ◽  
Doppler Power

With the arrival of 5G wireless communication systems, there has been increased interest in exploring higher frequency bands above 6 GHz, up to millimeter-wave frequencies. Radio wave propagation at these higher frequencies can suffer from substantial Doppler impairments. The linear dependency of Doppler shifts with carrier frequencies make them challenging to use in high-mobility 5G cellular scenarios. Therefore, the Doppler power spectrum (DPS) characteristics and radio channel coherence time (CT) of the received signals are of great importance for 5G wireless systems. In this way, this paper presents the effects of a narrow beam phased antenna array in reducing the DPS (due to user movement) and, simultaneously, increasing the coherence time (CT). Functional and complete descriptive assessments of beamwidths versus the DPS and CT, through different elements and geometries of the phased antenna array, are analyzed. Moreover, in terms of CT and the DPS, better performance on the 5G cellular scenarios was obtained.

An improved peak side lobe reduction method for linear array antenna for military applications

2021 ◽  
Vol 14 (2) ◽  
pp. 186-198
Author(s):  
Ravi Tej D ◽  
Sri Kavya Ch K ◽  
Sarat K. Kotamraju
Keyword(s):  
Energy Efficiency ◽  
Antenna Array ◽  
Antenna Arrays ◽  
Spectral Efficiency ◽  
Communication System ◽  
Communication Systems ◽  
Side Lobe ◽  
Side Lobe Level ◽  
Fill Rate ◽  
Content Type

PurposeThe purpose of this paper is to improve energy efficiency and further reduction of side lobe level the algorithm proposed is firework algorithm. In this paper, roused by the eminent swarm conduct of firecrackers, a novel multitude insight calculation called fireworks algorithm (FA) is proposed for work enhancement. The FA is introduced and actualized by mimicking the blast procedure of firecrackers. In the FA, two blast (search) forms are utilized and systems for keeping decent variety of sparkles are likewise all around planned. To approve the presentation of the proposed FA, correlation tests were led on nine benchmark test capacities among the FA, the standard PSO (SPSO) and the clonal PSO (CPSO).Design/methodology/approachThe antenna arrays are used to improve the capacity and spectral efficiency of wireless communication system. The latest communication systems use the antenna array technology to improve the spectral efficiency, fill rate and the energy efficiency of the communication system can be enhanced. One of the most important properties of antenna array is beam pattern. A directional main lobe with low side lobe level (SLL) of the beam pattern will reduce the interference and enhance the quality of communication. The classical methods for reducing the side lobe level are differential evolution algorithm and PSO algorithm. In this paper, roused by the eminent swarm conduct of firecrackers, a novel multitude insight calculation called fireworks algorithm (FA) is proposed for work enhancement. The FA is introduced and actualized by mimicking the blast procedure of firecrackers. In the FA, two blast (search) forms are utilized and systems for keeping decent variety of sparkles are likewise all around planned. To approve the presentation of the proposed FA, correlation tests were led on nine benchmark test capacities among the FA, the standard PSO (SPSO) and the clonal PSO (CPSO). It is demonstrated that the FA plainly beats the SPSO and the CPSO in both enhancement exactness and combination speed. The results convey that the side lobe level is reduced to −34.78dB and fill rate is increased to 78.53.FindingsSamples including 16-element LAAs are conducted to verify the optimization performances of the SLL reductions. Simulation results show that the SLLs can be effectively reduced by FA. Moreover, compared with other benchmark algorithms, fireworks has a better performance in terms of the accuracy, the convergence rate and the stability.Research limitations/implicationsWith the use of algorithms radiation is prone to noise one way or other. Even with any optimizations we cannot expect radiation to be ideal. Power dissipation or electro magnetic interference is bound to happen, but the use of optimization algorithms tries to reduce them to the extent that is possible.Practical implications16-element linear antenna array is available with latest versions of Matlab.Social implicationsThe latest technologies and emerging developments in the field of communication and with exponential growth in users the capacity of communication system has bottlenecks. The antenna arrays are used to improve the capacity and spectral efficiency of wireless communication system. The latest communication systems use the antenna array technology which is to improve the spectral efficiency, fill rate and the energy efficiency of the communication system can be enhanced.Originality/valueBy using FA, the fill rate is increased to 78.53 and the side lobe level is reduced to 35dB, when compared with the bench mark algorithms.

scholarly journals THE OUTDOOR PLANAR ANTENNA ARRAY BOOSTER MOBILE INTERNET 3G/4G

T-Comm ◽  
2021 ◽  
Vol 15 (5) ◽  
pp. 22-28
Author(s):  
Timur A. Gainutdinov ◽  
◽  
Vadim G. Kocherzhewskiy ◽  
Keyword(s):  
Antenna Array ◽  
Antenna Arrays ◽  
Communication Systems ◽  
Window Glass ◽  
Base Station ◽  
Mobile Internet ◽  
Planar Antenna ◽  
Radio Access ◽  
Planar Array ◽  
The Individual

Internet antennas-busters are one of the most common antennas of suburban subscriber stations of broadband radio access systems. In many ways, the speed of information transmission in such systems limits the signal level provided by the base station in the entire operating band of the Internet signal. Since the antenna located on the wall of the house is stationary, it can be made relatively large, which allows you to implement a higher gain and accordingly increase the signal level on the router. At the same time, the market for such antennas is quite saturated with a wide variety of antenna designs, but due to the increase in the number of people working in remote mode and the expected transition to mobile communication systems 5G, it still continues to develop rapidly. The paper proposes a new design of the transceiver mobile Internet antenna-buster, whose main advantage is absolute imperceptibility when installed outdoors. We consider a planar in-phase 8-element antenna array installed on the window glass of a suburban building. As the individual emitters of the lattice are encouraged to use a planar wave dipoles. A feeding scheme for the antenna array on flat two-wire lines has been developed, which provides in-phase and almost equal amplitude excitation of all array elements of the array. Calculations of antenna radiation patterns in the range of 1700-2700 MHz are given. It is shown that the developed antenna has a gain of 8-9 dB in the range of 1700-2100 MHz and 10-12 dB in the range of 2400-2700 MHz. These values are practically not inferior to similar indicators of known collinear antenna arrays and in the upper part of the work range, they have a gain of 1-2 dB compared to their analogs. A planar array matching scheme has been developed that provides a VSWR of about 2.5 in the range of 1700-2100 MHz and no worse than 2 in the range of 2400-2700 MHz. Variants of constructing planar antenna arrays with broadband emitters that provide similar matching without the use of additional matching devices are presented.

scholarly journals Experimental demonstration of peripherally-excited antenna arrays

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Ayman H. Dorrah ◽  
George V. Eleftheriades
Keyword(s):  
Antenna Array ◽  
Millimeter Wave ◽  
Antenna Arrays ◽  
Autonomous Vehicles ◽  
Communication Systems ◽  
Phased Arrays ◽  
Active Element ◽  
Practical Implementation ◽  
Experimental Demonstration ◽  
Automotive Radars

AbstractEmerging technologies such as 5G communication systems, autonomous vehicles and satellite Internet have led to a renewed interest in 2D antennas that are capable of generating fixed/scannable pencil beams. Although traditional active phased arrays are technologically suitable for these applications, there are cases where other alternatives are more attractive, especially if they are simpler and less costly to design and fabricate. Recently, the concept of the Peripherally-Excited (PEX) antenna array has been proposed, promising a sizable reduction in the active-element count, especially when compared with traditional phased arrays. Albeit at the price of exhibiting some constraints on the possible beam-pointing directions. Here, we demonstrate the first practical implementation of the PEX antenna concept, and the proposed design is capable of generating single or multiple independently scannable pencil beams at broadside and tilted radiation directions, from a shared radiating aperture. The proposed structure is also easily scalable to higher millimeter-wave frequencies, and can be particularly useful in MIMO and duplex antenna applications, commonly encountered in automotive radars, among others.

Sign in / Sign up

Export Citation Format

Share Document