Toward Performance-Based Seismic Design of Structures

1999 ◽  
Vol 15 (3) ◽  
pp. 435-461 ◽  
Author(s):  
Sutat Leelataviwat ◽  
Subhash C. Goel ◽  
Božidar Stojadinović
Keyword(s):  
Seismic Design ◽  
Design Procedure ◽  
Future Generation ◽  
Velocity Spectrum ◽  
Base Shear ◽  
Moment Frames ◽  
Steel Moment Frame ◽  
Plastic Analysis ◽  
Performance Based Seismic Design ◽  
Seismic Design Of Structures

A new performance-based plastic design procedure for steel moment frames is presented in this paper. The role of plastic analysis in seismic design of structures is illustrated. The ultimate design base shear for plastic analysis is derived by using the input energy from the design pseudo-velocity spectrum, a pre-selected yield mechanism, and an ultimate target drift. The proposed design procedure eliminates the need for a drift check after the structure is designed for strength as is done in the current design practice. Also, there is no need for response modification factors since the load deformation characteristics of the structure, including ductility and post-yield behavior, are explicitly used in calculating the design forces. The results of nonlinear static and nonlinear dynamic analyses of an example steel moment frame designed by the proposed method are presented and discussed. The implications of the new design procedure for future generation of seismic design codes are also discussed.

Performance-Based Seismic Design of Pallet-Type Steel Storage Racks

2006 ◽  
Vol 22 (1) ◽  
pp. 47-64 ◽  
Author(s):  
André Filiatrault ◽  
Robert E. Bachman ◽  
Michael G. Mahoney
Keyword(s):  
Seismic Design ◽  
Ground Motions ◽  
Design Procedure ◽  
The United States ◽  
Moment Frames ◽  
Type Steel ◽  
Collapse Prevention ◽  
Moment Resisting ◽  
Performance Based Seismic Design ◽  
Storage Racks

This paper develops a performance-based seismic design procedure for pallet-type steel storage racks located in areas accessible to the public. Performance objectives for racks consistent with current building code procedures in the United States are defined. The paper focuses on collapse prevention of racks in their down-aisle direction under the Maximum Considered Earthquake (MCE) ground motions at the site. The down-aisle lateral load-resisting systems of racks are typically moment frames utilizing special proprietary beam-to-column moment-resisting connections that may result in large lateral displacements when subjected to MCE ground motions. A simple analytical model that captures the seismic behavior of racks in their down-aisle direction is proposed. The model assumes that the beams and columns remain elastic in the down-aisle direction and that all nonlinear behavior occurs in the beam-to-column connections and the moment-resisting connections between the base columns and support concrete slab. Therefore the behavior is based on the effective rotational stiffnesses developed by the beam-to-column connectors and column-to-slab connections that vary significantly with connection rotation. The model is validated against the results of shake-table tests conducted on full-scale racks under several ground-motion intensities. Finally, the model is incorporated in a displacement-based procedure to verify collapse prevention of racks in their down-aisle direction under the MCE.

Evolutionary Seismic Design for Optimal Performance

2007 ◽  
pp. 42-58
Author(s):  
Arzhang Alimoradi ◽  
Shahram Pezeshk ◽  
Christopher Foley
Keyword(s):  
Seismic Design ◽  
Optimal Performance ◽  
Basic Knowledge ◽  
Moment Frame ◽  
Steel Moment Frame ◽  
Analysis And Design ◽  
Design Procedures ◽  
Frame Buildings ◽  
Performance Based Seismic Design ◽  
Earthquake Effects

The chapter provides an overview of optimal structural design procedures for seismic performance. Structural analysis and design for earthquake effects is an evolving area of science; many design philosophies and concepts have been proposed, investigated, and practiced in the past three decades. The chapter briefly introduces some of these advancements first, as their understanding is essential in a successful application of optimal seismic design for performance. An emerging trend in seismic design for optimal performance is speculated next. Finally, a state-of-the-art application of evolutionary algorithms in probabilistic performance-based seismic design of steel moment frame buildings is described through an example. In order to follow the concepts of this chapter, the reader is assumed equipped with a basic knowledge of structural mechanics, dynamics of structures, and design optimizations.

Direct Displacement Procedure for Performance-Based Seismic Design of Mid-Rise Wood-Framed Structures

2009 ◽  
Vol 25 (3) ◽  
pp. 583-605 ◽  
Author(s):  
Wei Chiang Pang ◽  
David V. Rosowsky
Keyword(s):  
Seismic Design ◽  
Response Spectrum ◽  
Design Procedure ◽  
Time History ◽  
Time History Analysis ◽  
Nonlinear Time History Analysis ◽  
Framed Structures ◽  
History Analysis ◽  
Performance Based Seismic Design ◽  
Nonlinear Time History

This paper presents a direct displacement design (DDD) procedure that can be used for seismic design of multistory wood-framed structures. The proposed procedure is applicable to any pure shear deforming system. The design procedure is a promising design tool for performance-based seismic design since it allows consideration of multiple performance objectives (e.g., damage limitation, safety requirements) without requiring the engineer to perform a complex finite element or nonlinear time-history analysis of the complete structure. A simple procedure based on normalized modal analysis is used to convert the code-specified acceleration response spectrum into a set of interstory drift spectra. These spectra can be used to determine the minimum stiffness required for each floor based on the drift limit requirements. Specific shear walls can then be directly selected from a database of backbone curves. The procedure is illustrated on the design of two three-story ATC-63 archetype buildings, and the results are validated using nonlinear time-history analysis.

Ductility Enhancement in Reinforced Concrete Structure with Buckling Restrained Braced Frames

2016 ◽  
Vol 847 ◽  
pp. 281-289
Author(s):  
Erkan Senol ◽  
Ismail Kose ◽  
Bilge Doran ◽  
Pelin Elif Mezrea ◽  
Bulent Akbas
Keyword(s):  
Reinforced Concrete ◽  
Pushover Analysis ◽  
Design Procedure ◽  
Braced Frames ◽  
Base Shear ◽  
Moment Frames ◽  
Concentrically Braced Frames ◽  
Capacity Curve ◽  
Concentrically Braced ◽  
Buckling Restrained Braced Frames

Adding braces to moment frames is considered to be quite an efficient technique for increasing the global stiffness and strength of the structure. It has not only been used in steel moment frames, but also in reinforced concrete (RC) moment frames in recent years. It certainly can increase the energy absorption capacity of structures and also decrease the demand imposed by seismic ground motions. Steel braces are anchored firmly to boundary beams and columns. They are modeled as truss elements and increase earthquake resistance of the building. Buckling restrained braced frames (BRBFs) in which members yield under both tension and compression without significant buckling have been used in recent years in order to ensure the desired seismic performance of special concentrically braced frames. BRBFs are similar to the special concentrically braced frames in that seismic accelerations are resisted by a building-frame members and diagonal braces whereas the design procedure is different. BRBs should be designed to permit ductile yielding both in compression and tension. In this paper, flat-slab RC building with two different configurations of buckling restraint braces (BRBs) is studied. The buildings have 4-storey with 5 bays in both X-and Y-directions and have been designed according to Turkish Specification of Reinforced Concrete Design (TS 500). In order to explore overall behavior up to failure and lateral load resisting capacities for these buildings, nonlinear static analyses have then been performed using SAP 2000-V14.1. Pushover analysis under constant gravity loads and monotonically increasing lateral forces during an earthquake until a target displacement is reached is generally carried out as an effective tool for performance based design. The major outcome of a pushover analysis is the capacity curve which shows the base shear vs. the roof displacement relationship and represents the overall performance of the building. The results of the analyses are presented in terms of capacity curve and energy dissipation.

SEISMIC DESIGN OF FRAME STRUCTURES EQUIPPED WITH INNOVATIVE HYSTERETIC DISSIPATIVE DEVICES

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Michele Palermo ◽  
Vittoria Laghi ◽  
Stefano Silvestri ◽  
Giada Gasparini ◽  
Tomaso Trombetti
Keyword(s):  
Seismic Design ◽  
Design Procedure ◽  
Structural Instability ◽  
Hysteretic Behavior ◽  
Frame Structure ◽  
Frame Structures ◽  
Order Effects ◽  
Final Design ◽  
Structural Engineer ◽  
Performance Based Seismic Design

In the present work, a Performance-Based Seismic Design procedure applied to multi-storey frame structures with innovative hysteretic diagonal steel devices (called Crescent Shaped Braces or CSB) is introduced. CSBs are steel elements of peculiar geometrical shapes that can be adopted in frame buildings as enhanced hysteretic diagonal braces. Based on their "boomerang" configuration and placement inside the frame structure, they are characterized by a lateral stiffness uncoupled from the yield strength and, if properly inserted, by an overall symmetric hysteretic behavior with hardening response at large drifts, thus preventing from global structural instability due to second-order effects. The procedure here presented is intended to guide the structural engineer through all the steps of the design process, from the selection of the performance objectives to the preliminary sizing of the CSB devices, up to the final design configuration. The steps are described in detail through the development of an applicative example.

Performance-Based Seismic Design Approach for High Speed Railway Bridge

2011 ◽  
Vol 383-390 ◽  
pp. 6601-6607
Author(s):  
Xing Chong Chen ◽  
Xiu Shen Xia ◽  
Li Li Xing
Keyword(s):  
Seismic Design ◽  
High Speed ◽  
Design Procedure ◽  
Reduction Factor ◽  
Railway Bridge ◽  
Strength Reduction Factor ◽  
Maximum Displacement ◽  
High Speed Railway ◽  
Displacement Ductility ◽  
Performance Based Seismic Design

Performance objectives and contents of resistance verification for high speed railway bridge are embodied and quantified based on the theory of performance-based seismic design. The resistance verification is proposed, which can control the damage under design earthquake and ensure safety of the pier under low-level earthquake. The simplified capacity spectra method for calculating displacement ductility factor is proposed by using strength reduction factor. The method for evaluating damage of RC bridge pier in high-level earthquake is presented by using maximum displacement and hysteretic energy. The proposed approach and procedures for performance-based seismic design are easily to implement. The performance-based seismic design procedure is demonstrated by using an example.

scholarly journals A novel reliability technique for implementation of Performance-Based Seismic Design of structures

2017 ◽  
Vol 142 ◽  
pp. 137-147 ◽  
Author(s):  
J. Ramon Gaxiola-Camacho ◽  
Hamoon Azizsoltani ◽  
Francisco J. Villegas-Mercado ◽  
Achintya Haldar
Keyword(s):  
Seismic Design ◽  
Performance Based Seismic Design ◽  
Seismic Design Of Structures
Sign in / Sign up

Export Citation Format

Share Document