scholarly journals F232 Characteristics of Two Phase Heat Transport Device with Multiple Parallel Tubes

2007 ◽  
Vol 2007 (0) ◽  
pp. 383-384
Author(s):  
Adina Cirtog ◽  
Sadanari Mochizuki ◽  
Akira Murata
Keyword(s):  
Heat Transport ◽  
Two Phase ◽  
Transport Device

Micro-Scale Two-Phase Flow Heat Transport Device Driven by Electrohydrodynamic Conduction Pumping

2013 ◽  
Author(s):  
Viral K. Patel ◽  
Jamal Seyed-Yagoobi
Keyword(s):  
Heat Transport ◽  
Two Phase Flow ◽  
Operating Conditions ◽  
Electrode Spacing ◽  
Working Fluid ◽  
Phase Flow ◽  
Two Phase ◽  
Micro Scale ◽  
Flow Heat ◽  
Transport Device

Micro-scale two-phase flow heat transport involves specialized devices that are used to remove large amounts of heat from small surface areas. They operate by circulating a working fluid through a heated space which causes phase change from liquid to vapor. During this process, a significant amount of heat is transported away from the heat source. Micro-scale heat transport devices are compact in size and the heat transfer coefficient can be orders of magnitude higher than in macro-scale for similar operating conditions. Thus, it is of interest to develop such devices for cooling of next-generation electronics and other applications with extremely large heat fluxes. The heat transport device presented in this paper is driven by electrohydrodynamic (EHD) conduction pumping. In EHD conduction pumping, when an electric field is applied to a dielectric liquid, flow is induced. The pump is installed in a two-phase flow loop and has a circular 1 mm diameter cross section with electrode spacing on the order of 120 μm. It acts to circulate the fluid in the loop and has a simple yet robust, non-mechanical design. Results from two-phase flow experiments show that it is easily controlled and such electrically driven pumps can effectively be used in heat transport systems.

A Mesoscale Electrohydrodynamic-Driven Two-Phase Flow Heat Transport Device in Circular Geometry and In-Tube Boiling Heat Transfer Coefficient Under Low Mass Flux

2015 ◽  
Vol 137 (4) ◽  
Author(s):  
Viral K. Patel ◽  
Jamal Seyed-Yagoobi
Keyword(s):  
Heat Transport ◽  
Boiling Heat Transfer ◽  
Two Phase Flow ◽  
Phase System ◽  
Phase Flow ◽  
Two Phase ◽  
Boiling Heat Transfer Coefficient ◽  
Low Mass ◽  
Flow Heat ◽  
Transport Device

Meso and microscale two-phase flow heat transport involves devices that are used to remove heat from small surface areas by circulating a working fluid through the heated space and causing phase change from liquid to vapor. There is an impetus to develop such devices for applications that require compact thermal management systems. The active, mesoscale two-phase flow heat transport device presented in this paper is driven solely by electrohydrodynamic (EHD) conduction pumping, and its heat transport characteristics are provided. An important understanding of the EHD conduction pump performance under a two-phase system versus single-phase system is also elucidated from these results. In addition, the ability to generate reliable low mass fluxes by this method has also allowed for determining local in-tube flow boiling heat transfer coefficient as a function of vapor quality in a mesoscale circular tube evaporator, providing limited but valuable information currently unavailable in the literature.

F233 Flow Phenomena in Two Phase Heat Transport Device with Three Parallel Tubes

2007 ◽  
Vol 2007 (0) ◽  
pp. 385-386
Author(s):  
Daisuke Inoue ◽  
Tetuo Onishi ◽  
Sadanari Mochizuki ◽  
Akira Murata
Keyword(s):  
Heat Transport ◽  
Two Phase ◽  
Flow Phenomena ◽  
Transport Device

Experimental Study of a Two-Phase Heat Transport Device Driven by Electrohydrodynamic Conduction Pumping

2008 ◽  
Author(s):  
Matthew R. Pearson ◽  
Jamal Seyed-Yagoobi
Keyword(s):  
Experimental Study ◽  
Electric Field ◽  
Capillary Pressure ◽  
Heat Transport ◽  
Working Fluid ◽  
Transport Capacity ◽  
Two Phase ◽  
Macro Scale ◽  
Transport Device ◽  
Capillary Phenomenon

Heat pipes are well-known as simple and effective heat transport devices, utilizing two-phase flow and the capillary phenomenon to remove heat. However, the generation of capillary pressure requires a wicking structure and the overall heat transport capacity of the heat pipe is generally limited by the amount of capillary pressure generation that the wicking structure can achieve. Therefore, to increase the heat transport capacity, the capillary phenomenon must be either augmented or replaced by some other pumping technique. Electro-hydrodynamic (EHD) conduction pumping has been demonstrated as an effective method for pumping liquid films by using DC electric fields and a dielectric working fluid. Beyond increased pumping capacity, EHD conduction pumping offers other advantages over capillary pumping, such as active control of the pumping capacity via the intensity of the applied electric field. This experimental study demonstrates the prospects of a macro-scale two-phase heat transport device that is driven by EHD conduction pumping. Various liquid film thicknesses are considered. In each case, the performance of the EHD-driven heat transport device at various electric field intensities is compared to the capabilities of the same device under gravity alone. The effect of tilt on the device is also considered.

Radial, Two-Phase Heat Transport Device Driven by Electrohydrodynamic Conduction Pumping

2011 ◽  
Author(s):  
Matthew R. Pearson ◽  
Jamal Seyed-Yagoobi
Keyword(s):  
Thin Film ◽  
Heat Flux ◽  
Heat Source ◽  
Liquid Film ◽  
Heat Pipe ◽  
Heat Transport ◽  
Working Fluid ◽  
Bottom Surface ◽  
Two Phase ◽  
Transport Device

Electrohydrodynamic (EHD) conduction pumping can be readily used to pump a thin film of a dielectric liquid along a surface, using electrodes that are embedded into the surface. This effect has been demonstrated under adiabatic conditions and has also been used to create a two-phase heat transport device that is similar to a heat pipe, but with the wicking structure replaced by an EHD conduction pump. In this study, a circular two-phase heat transport device is created. The device features circular electrodes that are arranged concentrically on the bottom surface and that pump a liquid film towards a heat source located at the center of the device. This heat source evaporates the liquid, and a large annular condenser at the periphery of the bottom surface provides a continuous supply of fresh liquid. This radial pumping configuration provides several advantages. Most notably, the heat source is wetted with fresh liquid from all 360 degrees, thereby reducing the amount of distance that must be travelled compared to a linear device. Consequently, the heat flux that can be removed from the central heat source far exceeds the normal critical heat flux of the working fluid. Electrodes are embedded in the condenser, adiabatic, and evaporator sections to maximize the amount of pumping head that can be generated and thereby maximize the heat flux removal.

Sign in / Sign up

Export Citation Format

Share Document