scholarly journals Selected Properties of Heat-Treated Eastern Red Cedar (Juniperus virginiana L.) Wood

BioResources ◽  
2013 ◽  
Vol 8 (3) ◽  
Author(s):  
Suleyman Korkut ◽  
Salim Hiziroglu
1987 ◽  
Vol 65 (6) ◽  
pp. 1092-1095 ◽  
Author(s):  
Anthonie M. A. Holthuijzen ◽  
Terry L. Sharik ◽  
James D. Fraser

Seed dispersal, predispersal and postdispersal seed predation, seed dormancy, and germination were followed for four cone-bearing eastern red cedar trees (Juniperus virginiana L.), a predominantly avian-dispersed plant species, in pastures in southwest Virginia from June 1981 through May 1982. Within 12 m from the source trees, 34.7% of the total cone crop was recovered. Recovered material consisted of unripe cones, ripe cones, parasitized cones, and pulpless seeds evacuated by birds, averaging 17.9, 11.6, 1.0, and 4.2%, respectively, of the cone crop. Predispersal avian predation of seeds accounted for 3.1% of the cone crop. After 1 year 0.9% of the cones remained on the trees. The remaining 61.3% of the cone crop was dispersed at least 12 m from the source trees. Less than 3% of the cone crop is likely to germinate within 12 m of the source trees, while about 25% is likely to germinate at greater distances. Red cedar seeds passed unharmed through the digestive tract of avian dispersers and showed greater total germination than manually depulped seeds. Red cedar seed banks were not found under a chronosequence of red cedar stands; seeds generally lost their viability within one growing season. Seed shadows decreased exponentially with distance from cone-bearing trees. A similar distribution function was reflected in the spatial distribution of red cedar cohorts colonizing pastures near source trees. The large cone crop, diverse avian disperser assemblage, physiological adaptation of red cedar to open, xeric sites, and availability of seed sources in fence rows contribute to the successful invasion of pastures by this species.


HortScience ◽  
1995 ◽  
Vol 30 (7) ◽  
pp. 1427-1428 ◽  
Author(s):  
L. Eric Hinesley ◽  
Layne K. Snelling

Postharvest drying of Leyland cypress [× Cupressocyparis leylandii (A.B. Jacks. & Dallim.)] branches was intermediate between eastern red cedar (Juniperus virginiana L.) and Fraser fir [Abies fraseri (Pursh) Poir.] in two laboratory experiments. Leyland cypress rehydrated without adverse effect until xylem pressure potential reached –4.0 to –5.0 MPa (shoot moisture content = 60% to 65%). For branches continuously maintained in water, Fraser fir and Leyland cypress kept equally well over 4 weeks of display, but Leyland cypress lasted longer than Fraser fir over 8 weeks. Postharvest keeping quality of Leyland cypress and Fraser fir was better than that of eastern red cedar.


2020 ◽  
Vol 147 ◽  
pp. 112224 ◽  
Author(s):  
Steven F. Vaughn ◽  
Jill K. Winkler-Moser ◽  
Mark A. Berhow ◽  
Jeffrey A. Byars ◽  
Sean X. Liu ◽  
...  

Plant Disease ◽  
1997 ◽  
Vol 81 (1) ◽  
pp. 111-111 ◽  
Author(s):  
G. R. Stanosz ◽  
G. W. Moorman

Branch dieback of savin juniper (Juniperus sabina L.) was observed on a tree in Dauphin County, PA, in May 1996. The symptomatic tree was in an ornamental planting that had been established approximately 10 years previously. Branches were cankered and girdled, causing yellowing and death of foliage beyond the cankers. Black pycnidia occurred in necrotic bark of cankers. Dark, two-celled conidia obtained from these pycnidia produced pure cultures of Diplodia mutila (Fr.:Fr.) Mont., the anamorph of Botryosphaeria stevensii Shoemaker. The fungus was identified based on pycnidial, conidial, and cultural characteristics, and comparison with known isolates provided by N. A. Tisserat (2). Pathogenicity of a single conidial isolate from Pennsylvania was tested in a greenhouse by wounding and inoculating twigs of potted eastern red cedar (Juniperus virginiana L.) with water agar plugs colonized by mycelium. Cankers formed and enlarged to girdle and kill the inoculated shoots, from which the pathogen was reisolated. No symptoms developed on, nor was the pathogen isolated from, control twigs. B. stevensii has been reported more frequently on angiosperms, such as apple (Malus Mill.) and oak (Quercus L.), than on gymnosperms. However, a canker disease caused by B. stevensii previously has been reported to affect J. scopulorum Sarg. and J. virginiana in Kansas, Missouri, and Iowa (1,2). References: (1) P. H. Flynn and M. L. Gleason. Plant Dis. 77:210, 1993. (2) N. A. Tisserat et al. Plant Dis. 72:699, 1988.


Holzforschung ◽  
2010 ◽  
Vol 64 (4) ◽  
Author(s):  
Walter C. Shortle ◽  
Kenneth R. Dudzik ◽  
Kevin T. Smith

Abstract Logs of eastern red cedar, Juniperus virginiana L., with well-developed bands of light-colored wood (“included sapwood”) within heartwood can be unsuitable for sawn wood products. This finding is in contrast to published information that the “included sapwood” is (1) a heartwood anomaly rather than sapwood and (2) its occurrence is not a reason to exclude this type of wood from commercial use. The alternative view presented here is that “included sapwood” is wound-initiated discolored wood which is the starting point for wood decay in living trees and which has adversely altered wood properties before the development of decay symptoms. Our study of the patterns of discoloration and decay, electrical resistance properties, elemental analysis, wood acidity, solubility in dilute NaOH, total phenol content, and tests of wood decay resistance indicated that the so-called included sapwood was discolored wood. This light-colored discolored wood had no greater decay resistance than sapwood, a common finding in other tree species in which “included sapwood” is found. Half the sample disks sent to our laboratory had symptomatic decay within the bands of light-colored discolored wood bounded by a phenol-enriched protective layer on the bark side and phenol-enriched heartwood on the pith side of the band. This ring-rot, even in its pre-symptomatic stage, can cause problems during processing for sawn wood products. Therefore, logs with well-developed bands of light-colored discolored wood should be considered high-risk material for some products, although they could be useful for others.


2020 ◽  
Vol 71 (4) ◽  
pp. 371-377
Author(s):  
Onur Ulker ◽  
Salim Hiziroglu

The objective of this study was to evaluate physical and mechanical properties of experimental panels manufactured from eastern red cedar (Juniperus virginiana L.) using modified starch as binder. Modulus of elasticity (MOE), modulus of rupture (MOR), internal bond strength (IB), hardness and dimensional stability in the form of thickness swelling and water absorption in addition to surface quality of the samples were tested. Panels were manufactured at three density levels, which are 0.60 g/cm3, 0.70 g/cm3 and 0.80 g/cm3. The highest MOE, MOR and IB values for the samples having 0.80 g/cm3 density were determined as 2207.16 MPa, 15.17 MPa and 0.87 MPa, respectively. Thickness swelling values of the samples soaked in water for 2 h ranged from 15.38 % to 23.23 %. Micrographs taken on the samples using scanning electron microscope revealed that starch was uniformly distributed within the particles. Based on the findings in this study, it appears that eastern red cedar would have a potential as a raw material to manufacture particleboard panel using modifi ed starch as green adhesive with accepted physical and mechanical properties.


Sign in / Sign up

Export Citation Format

Share Document