Observations on the Growth of YBa2Cu3O7 Thin Films at Very High Laser Fluences

1995 ◽  
Vol 388 ◽  
Author(s):  
Rand R. Biggers. ◽  
M. Grant Norton ◽  
I. Maartense ◽  
T.L. Peterson ◽  
E. K. Moser ◽  
...  
Keyword(s):  
Thin Films ◽  
Substrate Surface ◽  
Chemical Vapor ◽  
Growth Conditions ◽  
Organic Chemical ◽  
High Fluences ◽  
Laser Fluences ◽  
High Laser ◽  
High Laser Fluences ◽  
Very High

AbstractThe pulsed-laser deposition (PLD) technique utilizes one of the most energetic beams available to form thin films of the superconducting oxide YBa2Cu3O7 (YBCO). IN this study we examine the growth of YBCO at very high laser fluences (25 to 40 J/cm2); a more typical fluence for PLD would be nearer to 3 J/cm2. the use of high fluences leads to unique film microstructures which, in some cases, appear to be related to the correspondingly higher moveabilities of the adatoms. Films grown on vicinal substrates, using high laser fluences, exhibited well-defined elongated granular morphologies (with excellent transition temperature, Tc, and critical current density, Jc). Films grown on vicinal substrates using off-axis magnetron sputtering, plasma-enhanced metal organic chemical vapor deposition (PE-MOCVD), or PLD at more typical laser fluences showed some similar morphologies, but less well-defined. Under certain growth conditions, using high laser fluences with (001) oriented substrates, the YBCO films can exhibit a mixture of a- and c-axis growth where both crystallographic orientations nucleate on the substrate surface at the same time, and grow in concert. the ratio of a-axis oriented to c-axis oriented grains is strongly affected by the pulse repetition rate of the laser.

{10} edge dislocations in YSZ films grown on (100)MgO by PLD

1994 ◽  
Vol 52 ◽  
pp. 530-531
Author(s):  
Jason R. Heffelfinger ◽  
C. Barry Carter
Keyword(s):  
Thin Films ◽  
Semiconductor Lasers ◽  
Vapor Deposition ◽  
Substrate Surface ◽  
Laser System ◽  
Average Energy ◽  
Target Material ◽  
Chemical Vapor ◽  
Buffer Layers ◽  
Organic Chemical

Yttria-stabilized zirconia (YSZ) is currently used in a variety of applications including oxygen sensors, fuel cells, coatings for semiconductor lasers, and buffer layers for high-temperature superconducting films. Thin films of YSZ have been grown by metal-organic chemical vapor deposition, electrochemical vapor deposition, pulse-laser deposition (PLD), electron-beam evaporation, and sputtering. In this investigation, PLD was used to grow thin films of YSZ on (100) MgO substrates. This system proves to be an interesting example of relationships between interfaces and extrinsic dislocations in thin films of YSZ.In this experiment, a freshly cleaved (100) MgO substrate surface was prepared for deposition by cleaving a lmm-thick slice from a single-crystal MgO cube. The YSZ target material which contained 10mol% yttria was prepared from powders and sintered to 85% of theoretical density. The laser system used for the depositions was a Lambda Physik 210i excimer laser operating with KrF (λ=248nm, 1Hz repetition rate, average energy per pulse of 100mJ).

Thin films for superconducting electronics: Precursor performance issues, deposition mechanisms, and superconducting phase formation-processing strategies in the growth of Tl2Ba2CaCu2O8 films by metal-organic chemical vapor deposition

1997 ◽  
Vol 12 (5) ◽  
pp. 1214-1236 ◽  
Author(s):  
Bruce J. Hinds ◽  
Richard J. McNeely ◽  
Daniel B. Studebaker ◽  
Tobin J. Marks ◽  
Timothy P. Hogan ◽  
...  
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Vapor Pressure ◽  
Vapor Deposition ◽  
Film Growth ◽  
Chemical Vapor ◽  
Growth Conditions ◽  
Organic Chemical ◽  
Metal Organic ◽  
Organic Chemical Vapor Deposition

Epitaxial Tl2Ba2CaCu2O8 thin films with excellent electrical transport characteristics are grown in a two-step process involving metal-organic chemical vapor deposition (MOCVD) of a BaCaCuO(F) thin film followed by a postanneal in the presence of Tl2O vapor. Vapor pressure characteristics of the recently developed liquid metal-organic precursors Ba(hfa)2 • mep (hfa = hexafluoroacetylacetonate, mep = methylethylpentaglyme), Ca(hfa)2 • tet (tet = tetraglyme), and the solid precursor Cu(dpm)2 (dpm = dipivaloylmethanate) are characterized by low pressure thermogravimetric analysis. Under typical film growth conditions, transport is shown to be diffusion limited. The transport rate of Ba(hfa)2 • mep is demonstrated to be stable for over 85 h at typical MOCVD temperatures (120 °C). In contrast, the vapor pressure stability of the commonly used Ba precursor, Ba(dpm)2, deteriorates rapidly at typical growth temperatures, and the decrease in vapor pressure is approximately exponential with a half-life of ∼9.4 h. These precursors are employed in a low pressure (5 Torr) horizontal, hot-wall, film growth reactor for growth of BaCaCuO(F) thin films on (110) LaAlO3 substrates. From the dependence of film deposition rate on substrate temperature and precursor partial pressure, the kinetics of deposition are shown to be mass-transport limited over the temperature range 350–650 °C at a 20 nm/min deposition rate. A ligand exchange process which yields volatile Cu(hfa)2 and Cu(hfa) (dpm) is also observed under film growth conditions. The MOCVD-derived BaCaCuO(F) films are postannealed in the presence of bulk Tl2Ba2CaCu2O8 at temperatures of 720–890 °C in flowing atmospheres ranging from 0–100% O2. The resulting Tl2Ba2CaCu2O8 films are shown to be epitaxial by x-ray diffraction and transmission electron microscopic (TEM) analysis with the c-axis normal to the substrate surface, with in-plane alignment, and with abrupt film-substrate interfaces. The best films exhibit a Tc = 105 K, transport-measured Jc= 1.2 × 105 A/cm2 at 77 K, and surface resistances as low as 0.4 mΩ (40 K, 10 GHz).

Epitaxy, microstructure, and processing-structure relationships of TiO2 thin films grown on sapphire (0001) by MOCVD

1993 ◽  
Vol 8 (10) ◽  
pp. 2634-2643 ◽  
Author(s):  
H.L.M. Chang ◽  
T.J. Zhang ◽  
H. Zhang ◽  
J. Guo ◽  
H.K. Kim ◽  
...  
Keyword(s):  
Thin Films ◽  
Single Crystal ◽  
Film Growth ◽  
Growth Parameters ◽  
Substrate Surface ◽  
Growth Conditions ◽  
Organic Chemical ◽  
Tio2 Thin Films ◽  
Growth Plane ◽  
Deposited Films

TiO2 thin films have been deposited on sapphire (0001) substrates under various conditions by metal-organic chemical vapor deposition. The structural properties of the deposited films were characterized by x-ray diffraction and transmission electron microscopy. The important growth parameters were found to be the deposition temperature and the deposition rate. The ranges studied for the two parameters were 400 to 850 °C and 10 to 120 Å/min, respectively. Depending on the growth conditions, most of the deposited films were either single-phase anatase or rutile, or a mixture of the two. These films were all epitaxial, but none of them were single-crystal films. Three distinct epitaxial relationships were observed between the films and the substrates, and, depending on the growth conditions, a deposited film can contain one, two, or all three of them. The fact that the films we obtained, although epitaxial, were never single crystal is explained based on the consideration of the difference in the rotational symmetries of the substrate surface and the film growth plane. We believe that it should be generally true that, in heteroepitaxial growth, a true single-crystal film can never be obtained as long as the point symmetry group of the substrate surface is not a subgroup of that of the film growth plane.

Variant structure in metal-organic-chemical-vapor-deposition-derived SnO2 thin films on sapphire (0001)

1995 ◽  
Vol 10 (6) ◽  
pp. 1516-1522 ◽  
Author(s):  
Donhang Liu ◽  
Q. Wang ◽  
H.L.M. Chang ◽  
Haydn Chen
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Lattice Mismatch ◽  
Chemical Vapor ◽  
Growth Conditions ◽  
Organic Chemical ◽  
Metal Organic ◽  
Film Substrate ◽  
Organic Chemical Vapor Deposition

Tin oxide (SnO2) thin films were deposited on sapphire (0001) substrate by metal-organic chemical vapor deposition (MOCVD) at temperatures of 600 and 700 °C. The microstructure of the deposited films was characterized by x-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). At the growth conditions studied, films were single-phase rutile and epitaxial, but showed variant structures. Three distinct in-plane epitaxial relationships were observed between the films and the substrate. A crystallographic model is proposed to explain the film morphology. This model can successfully predict the ratio of the width to the length of an averaged grain size based upon the lattice mismatch of the film-substrate interface.

Comparative Study of Typical Defects in III-Nitride Thin Films and Their Alloys

1997 ◽  
Vol 482 ◽  
Author(s):  
K. Dovidenko ◽  
S. Oktyabrsky ◽  
J. Narayan ◽  
V. Joshkin ◽  
M. Razeghi
Keyword(s):  
Thin Films ◽  
Mixed Type ◽  
Chemical Vapor ◽  
Type A ◽  
Growth Conditions ◽  
Dark Field ◽  
Average Density ◽  
Organic Chemical ◽  
Type B ◽  
Edge Dislocations

AbstractThe microstructure and typical defects in GaN and GaN/GaAlN thin film heterostructures grown on (0001)α-A12O3 were investigated using different transmission electron microscopy (TEM) techniques including diffraction contrast analysis, multiple dark field imaging, and highresolution TEM. The films were grown by metal-organic chemical vapor deposition (MOCVD) technique. All of the films exhibited good electrical/optical properties. Yet, films were found to be of two distinctive types in terms of the microstructure. Films of the first type (A) were found to contain high, up to the 109 cm2, density of inversion domains (IDs) as well as pure edge (b=l/3[11 20]), screw and mixed type dislocations with the average density of 109 - 1010 cm−2. Smoother surface of the film, absence of IDs, and low (down to 107 cm−2 in the device quality layers) density of screw and mixed type dislocations were found to be characteristic for the second type (B) microstructure. The majority of defects present in these B-type GaN and GaN/GaA1N thin films were found to be threading pure edge dislocations associated with low angle tilt sub-grain boundaries. Despite the 1010 cm−2 density of the edge dislocations, the films displayed the devicequality electrical characteristics. Type A and type B microstructure can be obtained by the variation of growth conditions. The correlation between the optical and structural properties are discussed.

scholarly journals Multiple epitaxial lateral overgrowth of GaN thin films using a patterned graphene mask by metal organic chemical vapor deposition

2020 ◽  
Vol 53 (6) ◽  
pp. 1502-1508
Author(s):  
Jun-Yeob Lee ◽  
Jung-Hong Min ◽  
Si-Young Bae ◽  
Mun-Do Park ◽  
Woo-Lim Jeong ◽  
...  
Keyword(s):  
Thin Films ◽  
Electron Backscatter Diffraction ◽  
Chemical Vapor ◽  
Growth Conditions ◽  
Epitaxial Lateral Overgrowth ◽  
Organic Chemical ◽  
Lateral Overgrowth ◽  
Selective Area ◽  
Metal Organic ◽  
Backscatter Diffraction

Single-crystal gallium nitride (GaN) thin films were grown using a graphene mask via multiple epitaxial lateral overgrowth (multiple-ELOG). During the growth process, the graphene mask self-decomposed to enable the emergence of a GaN film with a thickness of several hundred nanometres. This is in contrast to selective area growth of GaN using an SiO2 mask leading to the well known hexagonal-pyramid shape under the same growth conditions. The multiple-ELOG GaN had a single-crystalline wurtzite structure corresponding to the crystallinity of the GaN template, which was confirmed with electron backscatter diffraction measurements. An X-ray diffraction rocking curve of the asymmetric 102 reflection showed that the FWHM for the multiple-ELOG GaN decreased to 405 from 540′′ for the underlying GaN template. From these results, the self-decomposition of the graphene mask during ELOG was experimentally proven to be affected by the GaN decomposition rather than the high-temperature/H2 growth conditions.

TEM study of very thin InGaAsP layers grown by liquid-phase epitaxy

1990 ◽  
Vol 48 (4) ◽  
pp. 672-673
Author(s):  
N.A. Bert ◽  
A.O. Kosogov
Keyword(s):  
Liquid Phase ◽  
Liquid Phase Epitaxy ◽  
Chemical Vapor ◽  
Growth Conditions ◽  
Dark Field ◽  
Organic Chemical ◽  
Simple Liquid ◽  
Cross Sectional ◽  
Conventional Procedure ◽  
Double Heterostructures

The very thin (<100 Å) InGaAsP layers were grown not only by molecular beam epitaxy and metal-organic chemical vapor deposition but recently also by simple liquid phase epitaxy (LPE) technique. Characterization of their thickness, interfase abruptness and lattice defects is important and requires TEM methods to be used.The samples were InGaAsP/InGaP double heterostructures grown on (111)A GaAs substrate. The exact growth conditions are described in Ref.1. The salient points are that the quarternary layers were being grown at 750°C during a fast movement of substrate and a convection caused in the melt by that movement was eliminated. TEM cross-section specimens were prepared by means of conventional procedure. The studies were conducted in EM 420T and JEM 4000EX instruments.The (200) dark-field cross-sectional imaging is the most appropriate TEM technique to distinguish between individual layers in 111-v semiconductor heterostructures.

Properties of Tin Oxide Films Prepared by MOCVD

2004 ◽  
Vol 449-452 ◽  
pp. 997-1000 ◽  
Author(s):  
Gwang Pyo Choi ◽  
Yong Joo Park ◽  
Whyo Sup Noh ◽  
Jin Seong Park
Keyword(s):  
Thin Films ◽  
Oxygen Content ◽  
Tin Oxide ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Organic Chemical ◽  
Metal Organic ◽  
Organic Chemical Vapor Deposition ◽  
Tin Oxide Films ◽  
N2 Annealing

Tin oxide thin films were deposited at 375 °C on α-alumina substrate by metal-organic chemical vapor deposition (MOCVD) process. A number of hillocks on the film were formed after air annealing at 500 °C for 30 min and few things in N2 annealing. The oxygen content and the binding energy after air annealing came to close the stoichiometric SnO2. The cauliflower hillocks of the film seem to be formed by the continuous migration of crystallites from a cauliflower grain on the substrate to release the stress due to the increase of oxygen content and volume.

Sign in / Sign up

Export Citation Format

Share Document