scholarly journals Optimization of Millet Axial Flow Threshing and Separation Device Based on Discrete Element Method

2021 ◽  
Vol 28 (6) ◽  
Keyword(s):  
Discrete Element Method ◽  
Axial Flow ◽  
Discrete Element ◽  
Separation Device ◽  
Element Method

Analysis of flow field and hemolysis index in axial flow blood pump by computational fluid dynamics–discrete element method

2020 ◽  
Vol 44 (1) ◽  
pp. 46-54
Author(s):  
Lizhi Cheng ◽  
Jianping Tan ◽  
Zhong Yun ◽  
Shuai Wang ◽  
Zheqin Yu
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Numerical Calculation ◽  
Flow Field ◽  
Discrete Element Method ◽  
Axial Flow ◽  
Discrete Element ◽  
Blood Pump ◽  
Axial Flow Blood Pump ◽  
Element Method

To fully study the relationship between the internal flow field and hemolysis index in an axial flow blood pump, a computational fluid dynamics–discrete element method coupled calculation method was used. Through numerical analysis under conditions of 6000, 8000, and 10,000 r/min, it was found that there was flow separation of blood cell particles in the tip of the impeller and the guide vane behind the impeller. The flow field has a larger pressure gradient distribution, which reduces the lift ratio of the blood pump and easily causes blood cell damage. The study shows that the hemolysis index obtained by the computational fluid dynamics—discrete element method is 4.75% higher than that from the traditional computational fluid dynamics method, which indicates the impact of microcollision between erythrocyte particles and walls on hemolysis index and also further verifies the validity of the computational fluid dynamics–discrete element coupling method. Through the hydraulic and particle image velocimetry experiments of the blood pump, the coincidence between numerical calculation and experiment is analyzed from macro and micro aspects, which shows that the numerical calculation method is feasible.

scholarly journals Granular axial flow characteristics in a grinding area studied by discrete element method

2015 ◽  
Vol 64 (23) ◽  
pp. 234502
Author(s):  
Han Yan-Long ◽  
Jia Fu-Guo ◽  
Zeng Yong ◽  
Wang Ai-Fang
Keyword(s):  
Discrete Element Method ◽  
Flow Characteristics ◽  
Axial Flow ◽  
Discrete Element ◽  
Element Method

Discrete element method to model cracking for two layer systems

TAPPI Journal ◽  
2019 ◽  
Vol 18 (2) ◽  
pp. 101-108
Author(s):  
Daniel Varney ◽  
Douglas Bousfield
Keyword(s):  
Discrete Element Method ◽  
Flexural Modulus ◽  
Single Layer ◽  
Discrete Element ◽  
Flexural Stress ◽  
Layer System ◽  
Three Point Bending ◽  
Moving Force ◽  
Coating Layers ◽  
Element Method

Cracking at the fold is a serious issue for many grades of coated paper and coated board. Some recent work has suggested methods to minimize this problem by using two or more coating layers of different properties. A discrete element method (DEM) has been used to model deformation events for single layer coating systems such as in-plain and out-of-plain tension, three-point bending, and a novel moving force picking simulation, but nothing has been reported related to multiple coating layers. In this paper, a DEM model has been expanded to predict the three-point bending response of a two-layer system. The main factors evaluated include the use of different binder systems in each layer and the ratio of the bottom and top layer weights. As in the past, the properties of the binder and the binder concentration are input parameters. The model can predict crack formation that is a function of these two sets of factors. In addition, the model can predict the flexural modulus, the maximum flexural stress, and the strain-at-failure. The predictions are qualitatively compared with experimental results reported in the literature.

Discrete element method–computational fluid dynamics analyses of flexible fibre fluidization

2021 ◽  
Vol 910 ◽  
Author(s):  
Yiyang Jiang ◽  
Yu Guo ◽  
Zhaosheng Yu ◽  
Xia Hua ◽  
Jianzhong Lin ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Discrete Element Method ◽  
Discrete Element ◽  
Dynamics Analyses ◽  
Element Method

Abstract

scholarly journals Numerical simulation on coal loading process of shearer drum based on discrete element method

2021 ◽  
pp. 014459872110135
Author(s):  
Zhen Tian ◽  
Shuangxi Jing ◽  
Lijuan Zhao ◽  
Wei Liu ◽  
Shan Gao
Keyword(s):  
Numerical Simulation ◽  
Discrete Element Method ◽  
Loading Rate ◽  
Low Cost ◽  
Element Model ◽  
Discrete Element ◽  
Helix Angle ◽  
Loading Process ◽  
Coal Particles ◽  
Element Method

The drum is the working mechanism of the coal shearer, and the coal loading performance of the drum is very important for the efficient and safe production of coal mine. In order to study the coal loading performance of the shearer drum, a discrete element model of coupling the drum and coal wall was established by combining the results of the coal property determination and the discrete element method. The movement of coal particles and the mass distribution in different areas were obtained, and the coal particle velocity and coal loading rate were analyzed under the conditions of different helix angles, rotation speeds, traction speeds and cutting depths. The results show that with the increase of helix angle, the coal loading first increases and then decreases; with the increase of cutting depth and traction speed, the coal loading rate decreases; the increase of rotation speed can improve the coal loading performance of drum to a certain extent. The research results show that the discrete element numerical simulation can accurately reflect the coal loading process of the shearer drum, which provides a more convenient, fast and low-cost method for the structural design of shearer drum and the improvement of coal loading performance.

Sign in / Sign up

Export Citation Format

Share Document