scholarly journals EFFECTS OF SODIUM HYPOCHLORIDE ON CYCLIC FATIGUE RESISTANCE OF BIORACE ROTARY INSTRUMENT WITH DIFFERENT TIP SIZES

2021 ◽  
pp. 1-1
Author(s):  
Ayfer ATAV ATEŞ ◽  
Burçin ARICAN
Keyword(s):  
Fatigue Resistance ◽  
Cyclic Fatigue ◽  
Sodium Hypochloride ◽  
Rotary Instrument

scholarly journals Effect of synchronous irrigation on cyclic fatigue of nickel-titanium instrument in the dynamic and static models

2021 ◽  
Vol 19 ◽  
pp. 228080002098740
Author(s):  
Haiyun Liu ◽  
Yanfeng Li ◽  
Guangquan Chai ◽  
Yuan Lv ◽  
Changjian Li ◽  
...  
Keyword(s):  
Fatigue Resistance ◽  
Flow Rate ◽  
Dynamic Control ◽  
Cyclic Fatigue ◽  
Nickel Titanium ◽  
Control Group ◽  
Time To Failure ◽  
Dynamic Tests ◽  
Significant Difference ◽  
Experimental Group

Objective: To evaluate the effect of synchronous water irrigation on the fatigue resistance of nickel-titanium instrument. Methods: A standardized cyclic fatigue test models were established, and five types of nickel-titanium instruments (PTU F1, WO, WOG, RE, and M3) were applied. Each instrument was randomly divided into two groups ( N = 12). There was synchronous water irrigation in the experimental group, and no water irrigation in the control group. Besides, ProTaper Universal F1 was randomly divided into 10 groups ( N = 20). In the static group, nickel-titanium instruments were divided into one control group (no irrigation, N = 20) and six experimental group (irrigation, N = 20) based on different flow rate, angle and position; while in the dynamic group, instruments were divided into one control group (no irrigation, N = 20) and two experimental group (irrigation, N = 20) based on different flow rate. The rotation time (Time to Failure, TtF) of instruments was recorded and analyzed. Results: According to the static experiments, the TtF of instruments in all experimental groups was significantly higher than that in the static control group. Besides, the dynamic tests of PTU F1 showed that the TtF in the experimental group was significantly higher than that in the dynamic control group. Compared with control group, the TtF in the experimental groups increased by at least about 30% and up to 160%. The static and dynamic tests of PTU F1 showed that the TtF of nickel-titanium instrument in all experimental groups was significantly higher than that in the control group. However, there was no significant difference between any two experimental groups. Conclusion: Regardless of dynamic or static model, TtF with irrigation was longer than that with non-irrigation, indicating that synchronous irrigation can increase the fatigue resistance of nickel-titanium instrument. However, different irrigation conditions may have the same effect on the fatigue resistance.

Influence of surrounding temperature and angle of file access on cyclic fatigue resistance of two single file nickel‐titanium instruments

2020 ◽  
Author(s):  
Giusy Rita Maria La Rosa ◽  
Carlotta Palermo ◽  
Sebastiano Ferlito ◽  
Gaetano Isola ◽  
Francesco Indelicato ◽  
...  
Keyword(s):  
Fatigue Resistance ◽  
Cyclic Fatigue ◽  
Nickel Titanium ◽  
File Access ◽  
Single File

scholarly journals Shaping and Centering Ability, Cyclic Fatigue Resistance and Fractographic Analysis of Three Thermally Treated NiTi Endodontic Instrument Systems

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5823
Author(s):  
Saulius Drukteinis ◽  
Vytaute Peciuliene ◽  
Ruta Bendinskaite ◽  
Vilma Brukiene ◽  
Rasmute Maneliene ◽  
...  
Keyword(s):  
Fatigue Resistance ◽  
Cyclic Fatigue ◽  
Fractographic Analysis ◽  
Significance Level ◽  
Root Canals ◽  
Topographic Features ◽  
New Instrument ◽  
Before And After ◽  
Number Of Cycles ◽  
Thermally Treated

The better understanding of the clinically important behavioral features of new instrument systems has an important significance for the clinical endodontics. This study aimed to investigate the shaping and centering ability as well as cyclic fatigue resistance of HyFlex CM (CM), HyFlex EDM (EDM) and EdgeFile (EF) thermally treated nickel–titanium (NiTi) endodontic instrument systems. Sixty curved root canals of the mesial roots of mandibular molars were randomly assigned into three groups (n = 20) and shaped using CM, EDM and EF files up to the size 40 and taper 04 of the instruments. µCT scanning of the specimens before and after preparation was performed and the morphometric 2D and 3D parameters were evaluated in the apical, middle and coronal thirds of root canals. In each group, 40.04 instruments (n = 20) were subjected to the cyclic fatigue resistance test in artificial root canals at 37 °C temperature until fractures occurred, and the number of cycles to failure (NCF) was calculated. The fractographic analysis was performed using a scanning electron microscope, evaluating topographic features and surface profiles of the separated instruments. The one-way analysis of variance with post hoc Tuckey’s test was used for statistical analysis of the data; the significance level was set at 5%. All systems prepared the comparable percentage of root canal surface with the similar magnitude of canal transportation in all root thirds (p > 0.05), but demonstrated significantly different resistance to cyclic fatigue (p < 0.05). The most resistant to fracture was EF, followed by EDM and CM. The length of the fractured fragments was not significantly different between the groups, and fractographic analysis by SEM detected the typical topographic features of separated thermally treated NiTi instrument surfaces.

scholarly journals Cyclic fatigue resistance of 2Shape, Twisted File and EndoSequence Xpress nickel-titanium rotary files at intracanal temperature

2018 ◽  
Vol 12 (4) ◽  
pp. 283-287 ◽  
Author(s):  
Gülşah Uslu ◽  
Taha Özyürek ◽  
Mustafa Gündoğar ◽  
Koray Yılmaz
Keyword(s):  
Fatigue Resistance ◽  
Statistical Significance ◽  
Cyclic Fatigue ◽  
Nickel Titanium ◽  
Bonferroni Correction ◽  
Significant Difference ◽  
Inner Diameter ◽  
The Difference ◽  
Number Of Cycles ◽  
Analyze Data

Background. The aim of this study was to compare the cyclic fatigue resistance of 2Shape, Twisted File (TF) and EndoSequence Xpress (ESX) nickel-titanium rotary files at intracanal temperature (35°C). Methods. Twenty 2Shape TS1 (25/.04), 20 TF (25/.04) and 20 ESX (25/.04) files were tested for cyclic fatigue at intracanal temperature (35°C). All the instruments were rotated in artificial canals which were made of stainless steel with an inner diameter of 1.5 mm, 60° angle of curvature and a radius curvature of 5 mm until fracture occurred; the time to fracture was recorded in seconds using a digital chronometer and the number of cycles to fracture (NCF) for each file was calculated. Kruskal-Wallis test with Bonferroni correction was performed to statistically analyze data using SPSS 21.0. Statistical significance was set at P<0.05. Results. NCF values revealed that the 2Shape had significantly the highest cyclic fatigue resistance, followed by TF and ESX at intracanal temperature (P<0.05). The difference was significant between the TF and ESX groups (P<0.05). There was no significant difference among the 2Shape, TF and ESX files with respect to the lengths of the fractured file fragments (P>.05). Conclusion. Within the limitations of present study, it was concluded that the cyclic fatigue resistance of 2Shape files at the intracanal temperature is higher than that of TF and ESX files.

The Residual Stresses Generated by Deep Rolling and their Stability in Fatigue & Application to Deep-Rolled Crankshafts

2006 ◽  
Vol 524-525 ◽  
pp. 45-50 ◽  
Author(s):  
H. Michaud ◽  
Jean Michel Sprauel ◽  
F. Galzy
Keyword(s):  
Residual Stresses ◽  
Fatigue Resistance ◽  
Experimental Validation ◽  
Crack Arrest ◽  
Cyclic Fatigue ◽  
Rolling Process ◽  
Fatigue Behaviour ◽  
Deep Rolling ◽  
Bending Fatigue ◽  
Compressive Residual Stresses

In this work, the effect of steel grade on the fatigue resistance of deep-rolled crankshafts is analysed. In the first part of this paper, the mechanisms leading to the increase of the fatigue resistance brought by the deep rolling treatment, is presented. This reinforcement is mainly linked to crack arrest due both to a decrease of the in-depth stress concentration factor and to remaining compressive residual stresses induced by the deep rolling. In a second part, an analytical model of residual stresses generation by deep-rolling and fatigue is presented. In this model the low cyclic fatigue behaviour of the steel is taken into account, and the residual stress stability with bending fatigue cycling can be predicted. After a presentation of the experimental validation on two different microstructures (baintic and ferrito- perlitic), this model is used for analysing the main parameters of the deep-rolling process and fatigue resistance.

scholarly journals Safety and Effectiveness of Additional Apical Preparation using a Rotary Heat-treated Nickel–Titanium file with Larger Diameter and Minimum Taper in Retreatment of Curved Root Canals

2021 ◽  
Author(s):  
Jader Camilo Pinto ◽  
Fernanda Ferrari Esteves Torres ◽  
Airton Oliveira Santos-Junior ◽  
Marco Antonio Hungaro Duarte ◽  
Juliane Maria Guerreiro-Tanomaru ◽  
...  
Keyword(s):  
Fatigue Resistance ◽  
Continuous Wave ◽  
Cyclic Fatigue ◽  
Nickel Titanium ◽  
Filling Material ◽  
Root Canals ◽  
Filling Materials ◽  
Heat Treated ◽  
Before And After ◽  
Curved Root Canals

Abstract Objective The aim of this study was to investigate the effect of additional apical preparation using the ProDesign Logic (PDL) 50/.01 rotary heat-treated nickel–titanium (NiTi) file with a larger diameter and minimal taper for retreatment of curved root canals. Materials and Methods Mesial curved root canals of 12 mandibular molars were prepared using PDL 25/.06 and filled using the continuous wave of condensation technique and AH Plus sealer. After retreatment using ProDesign S (PDS) 25/.08, PDL 25/.06 and PDL 35/05, a complementary procedure was performed with PDL 50/.01. Microcomputed tomography (micro-CT) scanning was performed before and after retreatment procedures. The cyclic fatigue resistance of unused PDS 25/.08, PDL 25/.06, PDL 35/.05 and PDL 50/.01 instruments (n = 12) was evaluated in a stainless-steel device. Statistical Analysis Data on the volumes of the root canals and the remaining filling materials were submitted to the paired t-test. Cyclic fatigue resistance data was submitted to one-way ANOVA and Tukey’s tests (α = 0.05). Results Use of PDL 50/.01 decreased the remaining filling materials in the apical third (p < 0.05). The root canal volume was similar in the cervical and middle thirds before and after preparation using PDL 50/.01 (p > 0.05). PDL 50/.01 presented the highest cyclic fatigue resistance (p < 0.05). Conclusions Use of the PDL 50/.01 instrument as an additional apical preparation for retreatment of curved root canals improved filling material removal in the apical third, while maintaining the dentin in the cervical and middle thirds. In addition, PDL 50/.01 presented high-flexural resistance.

Sign in / Sign up

Export Citation Format

Share Document