Technology and Education Inputs for Productivity Enhancement in Garment Manufacturing in the Developing World

2021 ◽  
Vol 7 (5) ◽  
pp. 3853-3865
Author(s):  
Singh Rana Kamaljit ◽  
Singh Randhawa Jagjit ◽  
Kalra Praveen
Keyword(s):  
Time Management ◽  
Manufacturing Industry ◽  
Production Management ◽  
Developing World ◽  
Measurement Techniques ◽  
Secondary Data ◽  
Efficient Production ◽  
Apparel Manufacturing ◽  
The Subject ◽  
Garment Manufacturing

Efficient production management in the garment manufacturing industry is estimated by using work measurement techniques. These techniques are based on standard processing timings. Several studies have been undertaken using the time study technique to enhance productivity of the garment production lines in an apparel manufacturing factory. Efficiency is translated into the time spent on carrying out a particular function, this time consumption is dependent upon the worker’s level of fatigue and quality of output. The entire onus of responsibility of the worker’s output becomes anchored on his or her ability to carry out repetitive actions over long durations of time.Objectives: This paper examines the work of various scholars as well as scrutinizes the performance of certain repetitive actions in the garment manufacturing process in apparel industries employing large numbers of workers. The objective is to project a rationale for the development of work aids to significantly enhance productivity.Methods: A secondary data review is being conducted to find out the work of other researchers in the field of garment manufacturing. The author has developed his own contribution in the form of work aid interventions to help in the process. A Review of literature on the subject was attempted to obtain the required information and insights on the subject.Finding: There is a widely felt need for the creation of active work aids in the garment manufacturing industry to promote the worker efficiency as also the overall productivity of the industry.Scope: The research based study has large and far-reaching scope for the garment manufacturing industry. All manufacturing units are constantly on the lookout for promoting efficiency and productivity. They are willing to appreciate all forms of interventions to improve time management and enhanced output of products. The findings of this review paper have broad based applicability for the garment manufacturing industry not only in India but also in most of the developing world.

scholarly journals Experimental Study and Improving the Productivity of Assembly line Balancing in Teleja Garment Manufacturing in Ethiopia

2021 ◽  
Author(s):  
Yohannes Admassu Gelaw
Keyword(s):  
Quantitative Research ◽  
Production Efficiency ◽  
Assembly Line Balancing ◽  
Secondary Data ◽  
Apparel Industry ◽  
Line Balancing ◽  
Central Process ◽  
Apparel Manufacturing ◽  
Efficiency And Productivity ◽  
Garment Manufacturing

This study is designed to assess and improve apparel sewing section efficiency and productivity throughout line balancing. Apparel industry is one of the oldest and among the most global industry, being primarily concerned with the design and production of cloth and their supply. The central process in apparel manufacturing is the joining together of components which is known as the sewing process , which is the most labour intensive type of manufacturing process .Proper utilization of resources in garment sewing section is more critical to enhance the performance of the apparel industry by reducing production cost and minimizing wastage. For effective utilization of resources in the sewing section, good line balancing is important to increase productivity and production efficiency. This research was a design to analyse and improve the assembling line in the case of Telaje garment manufacturing and sales plc. The study was first conduct observations in the production floor and start work with the selection of sewing line in the garment production process. Among the nine lines of the factory select one on the production floor and one garment ordered product known as five pocket men’s jeans trousers are selected. For this study, both qualitative and quantitative research approaches were employed. Both primary and secondary data sources are used to detail the collected relevant data to understand the current efficiency scenario of the factory. The main challenges to minimizing line efficiency and productivity with the expected performance measurement are improper utilization of resources and improper implementation of line balancing in sewing section, therefore this thesis work shows that the bottleneck process and consequence solution will be searched, and finally significantly improving the productivity by 418 unit products/ day and, hence the efficiency will increase from 28.83% to 50.04% of the line

STRATEGI PRODUK BORDIR DI KAPALO KOTO, KOTO TANGAH SIMALANGGANG, KOTA PAYAKUMBUH (Studi Kasus di Usaha Bordir Limpapeh”s Kebaya)

2019 ◽  
Vol 8 (1) ◽  
pp. 111
Author(s):  
Riris Susiani ◽  
Ernawati Ernawati
Keyword(s):  
Rapid Development ◽  
Secondary Data ◽  
Export Market ◽  
Product Strategy ◽  
Analysis Techniques ◽  
Product Service ◽  
Qualitative Descriptive ◽  
The Subject ◽  
The Times ◽  
Descriptive Method

AbstrakMasalah dalam penelitian ini yaitu pentingnya strategi produk dalam menjalankan sebuah usaha agar mampu bertahan dan bersaing  dengan perusahaan lain yang sejenis dalam kondisi persaingan yang ketat dan perkembangan zaman yang sangat cepat. Strategi produk sangat diperlukan dalam mememenuhi tuntutan konsumen seperti meningkatkan kualitas, menciptakan merek, pelayanan serta jaminan terhadap produk yang ditawarkan agar usaha mampu berkembang. Limpapeh”s Kebaya adalah usaha yang sedang berkembang dan telah mampu memasarkan produk bordirnya hingga menembus pasar ekspor. Penelitian ini bertujuan untuk mendeskripsikan strategi produk bordir di Limpapeh”s Kebaya, Kapalo Koto, Koto Tangah Simalanggang, Kota Payakumbuh. Metode penelitian menggunakan metode deskriftif kualitatif, jenis data berupa data primer dan  sekunder. Teknik pengumpulan data melalui observasi, wawancara dan dokumentasi. Teknik analisis data dilakukan dengan teknik analisa model interaktif yang berkaitan dengan pokok permasalahan yaitu dengan model reduksi data, penyajian data dan pengambilan kesimpulan. Hasil penelitian yaitu strategi produk yang dilakukan di Limpapeh”s Kebaya adalah dimulai dari menciptakan produk bordir yang berkualitas, desain motif bordir yang up to date dan kreatif, menyediakan ukuran yang special, memberi merek pada produk bordir, memberi kemasan yang menarik (paperbag) dan serbaguna, pelayanan yang cepat, tepat dan ramah serta pemberian jaminan terhadap produk border.Kata Kunci: strategi produk, pelayanan, bordir. AbstractThe problem in this study is the importance of product strategy in running a business in order to be able to survive and compete with other similar companies in conditions of intense competition and very rapid development of the times. Product strategy is very necessary in fulfilling consumer demands such as improving quality, creating brands, services and guarantees for products offered so that businesses are able to grow. Limpapeh's Kebaya is a growing business and has been able to market its embroidery products to penetrate the export market. This study aims to describe the strategy of embroidery products in Limpapeh's Kebaya, Kapalo Koto, Koto Tangah Simalanggang, Payakumbuh City. The research method uses qualitative descriptive method, the type of data in the form of primary and secondary data. The technique of collecting data through observation, interviews and documentation. Data analysis techniques are carried out with interactive model analysis techniques that are related to the subject matter, namely with a model of data reduction, data presentation and conclusion. The results of the research, namely the product strategy carried out at Limpapeh's Kebaya, are started from creating quality embroidery products, up-to-date and creative embroidery motifs, providing special sizes, giving brands to embroidery products, giving attractive packaging (paperbag) and versatile, fast, precise and friendly service and guarantee of embroidery products. Keywords: product, service, embroidery strategy.

THE USE OF COMMUNITY LANGUAGE LEARNINGMETHOD TO IMPROVE STUDENTS’ SPEAKING ACHIEVEMENT

2015 ◽  
Vol 4 (1) ◽  
Author(s):  
Eko Widoyo Putro ◽  
Berlin Sibarani
Keyword(s):  
Language Learning ◽  
Secondary Data ◽  
Primary Data ◽  
Second Grade ◽  
Learning Method ◽  
Field Notes ◽  
The Subject ◽  
The Mean ◽  
Method Improvement ◽  
Community Language

This study is aimed at improving the second grade of students’ speakingachievement by using Community Language Learning (CLL) Method. Theresearch was conducted by applying classroom action research. The subject of this study was second grade of Private Senior High School (Sekolah Menengah Atas Swasta) of Dwi Tunggal Tanjung Morawa which consisted of 31 students. To collect the data, the instruments used were primary data (SpeakingTest) and secondary data (interview sheet, observation sheet, field notes). It can be seen from the score in test I, test II and test III. In the Test I, the mean of the students’score was (64.77), in the Test II was (71.35), and the mean of the students’ score of the Test III was (80.90). Based on the interview, and observation sheet, it shows that the expression and excitement of the students got improved as well. It was found that teaching of speaking by using Community Language Learningcould significantly improve students’ speaking achievement.Key Words: Community Language Learning, Method, Improvement, Speaking Achievement

THE APPLICATION OF PREVIEW, READ, WRITE, AND RECITE (PRWR) METHOD TO IMPROVE STUDENT’S ACHIEVEMENT IN READING RECOUNT TEXT

2014 ◽  
Vol 3 (2) ◽  
Author(s):  
Rahmat Nasution And Rahmah
Keyword(s):  
Secondary Data ◽  
Analysis Data ◽  
Primary Data ◽  
Average Score ◽  
First Year ◽  
Generic Structure ◽  
The Subject ◽  
Minimum Criteria ◽  
Main Ideas ◽  
Orientation Test

The objective of this research is to find out whether the application Preview, Read,Write, and Recite (PRWR) method improve student’s achievement in readingrecount text. This research applied classroom action research model. This studywas done in six meetings. The subject of this study was first year of SMAN 1Delitua. Primary data were collected by giving 20 questions of multiple-choicetest, the aspects contained in the tests focused on generic structure, main ideas,factual information, and Secondary data were collected by (interview, observationsheet, and questionnaire sheet. Based on analysis data, it was found that thestudent’s achievement improved. It could be seen from the comparison of result inthe orientation test and the cycle test I and II. There were only 9 students who hadpassed minimum criteria KKM in orientation test (75). The improvement showedthat in cycle I and II, based on the total average score it was 16 (42,4%) up to 26(78,7%) in cycle II, The secondary data gathered from interview, observationsheet, and questionnaire sheet, showed that students’ expression and enthusiasticalso improved. Thus, it was found that the applications of Preview, Read, Write,and Recite (PRWR) method in process of teaching improved students’achievement in reading recount text. It is suggested that English teachers applyPRWR method in teaching reading recount text.

scholarly journals Employee Compensation Strategy as Sustainable Competitive Advantage for HR Education Practitioners

2021 ◽  
Vol 13 (3) ◽  
pp. 1049
Author(s):  
Eungoo Kang ◽  
Hyoyoung Lee
Keyword(s):  
Manufacturing Industry ◽  
Pay For Performance ◽  
Sustainable Competitive Advantage ◽  
Alternative Compensation ◽  
Use Of Data ◽  
Significant Relationships ◽  
The Subject ◽  
Compensation Program ◽  
Employee Competencies ◽  
American Employees

By building on compensation literature, the current study explored and identified the ties between workers’ competencies, corporate cultures, and compensation schemes. These schemes were typically the subject of literature on the factors dealing with the implementation of incentive systems for pay for performance (PFP) or problems that can lead to a PFP system’s failure. Unfortunately, when it comes to research that HR education practitioners may do, the literature has been scarce. It shows which organizational elements might be necessary to examine when deciding whether a PFP or an alternative compensation program is acceptable. This study aimed to add insight into this gap in research. The findings of this study showed from the use of data from 385 American employees in the manufacturing industry that there are significant relationships statistically between employee competencies and organizational cultures and those findings can be corroborated with existing researches, suggesting compensation schemes were related to multiple types of competence organizations and different organization cultures, thus adding meaningfully to the current literature.

Improving Efficiency of Apparel Manufacturing Through the Principles of Resource Management

2021 ◽  
pp. 0887302X2110054
Author(s):  
Anis Fatima ◽  
Muhammad Tufail
Keyword(s):  
Resource Management ◽  
Competitive Advantage ◽  
Manufacturing Industry ◽  
Apparel Industry ◽  
Process Efficiency ◽  
Apparel Manufacturing ◽  
Effective Utilization ◽  
Time Motion ◽  
Motion Study ◽  
Product Layout

To gain the competitive advantage, it has become essential for manufacturing industry to use its resources effectively, efficiently and economically. It is required to understand that such resources are based on 5 Ms (manpower, methods, materials, money, and machinery). In this study an apparel industry was selected to create a directorial plan by using the ideologies of resource management to improve the process efficiency. For this the data related to the product layout, operation plan, and process flow was collected. Time motion study was performed for aspect analysis. Information regarding operation, number of machines and efficiency of the production line was evaluated. The proposed plan successfully increase the efficiency up to 10%. It also shows an improvement in effective utilization of manpower and money.

Teaching Literature among Pre-Service Teachers: Challenges and Solutions

2021 ◽  
Vol 8 (1) ◽  
pp. 95-103
Author(s):  
Ain Suraya Harun ◽  
Norhanim Abdul Samat
Keyword(s):  
Time Management ◽  
Public University ◽  
Mixed Method Research ◽  
Structured Interviews ◽  
Teaching Techniques ◽  
Literature Teaching ◽  
Teaching Literature ◽  
Teacher Trainees ◽  
The Subject ◽  
The University

Teacher trainees should be prepared to teach and exposed to the approaches, models, and techniques of literature teaching. Being ready can also boost their confidence to teach literature so that the lessons can be delivered smoothly.  These teachers are so new to teaching that they might face difficulties when teaching English, specifically literature. There are teaching techniques, strategies and approaches that those pre-service teachers can investigate to understand better how to apply in their teaching. Additionally, their lack of exposure towards literature teaching can also affect the performance of teaching. This paper seeks to investigate pre-service teachers’ readiness to teach literature in schools and the challenges faced by them while teaching literature. It also attempts to offer suggestions to improve better literature teaching. This mixed method research study used questionnaires distributed to 22 TESL pre-service teachers from a public university in Johor. Additionally, semi-structured interviews were conducted with two lecturers who have vast experiences in supervising pre-service teachers at schools. Results show that a majority of fourth year TESL students are ready to teach literature with the training and courses provided by the university. Also, among the challenges that they faced are time management and their students’ feelings on the subject. This study hopes to provide insights to training teachers on literature teaching.

ROBOTS AND APPAREL MANUFACTURING

2021 ◽  
Vol 0 (15) ◽  
pp. 0-0
Author(s):  
Ahmet ÖZBEK ◽  
Oğuzhan PEKİNALP
Keyword(s):  
Quality Control ◽  
Humanoid Robot ◽  
Robotic Systems ◽  
Robotic Arm ◽  
Apparel Manufacturing ◽  
Robot Gripper ◽  
The People ◽  
Apparel Production ◽  
The Subject ◽  
Robot Technology

Aim: The main purpose of this manuscript is to examine the robot technologies developed or under development for use in apparel production. Then, based on the identified related robotic technologies, it is aimed to inform the apparel clothing companies about the latest status of robot technologies and to provide information about the identified shortcomings to the people or institutions interested in this field, leading to new studies. Method: Within the scope of the manuscript, the literature on the subject was searched. Results: As a result of the literature review, robotics developed or under development to perform fabric laying (PR2 robot, Gripper and Picking Pad), sewing (Kuka LWR 4 and Robotic Arm), ironing (Baxter and Humanoid robot TEO) and packaging (Robot Motoman SDA10D) technologies have been identified. However, no robot technology has been found for cutting and quality control processes. Conclusion: Although many robotic systems have been developed for use in the apparel production, it has been understood that new R&D studies are needed in this area in order for the production to be fully robotized.

scholarly journals Managing Manufacturing Complexity Drivers on Performance – An Initial Study

2018 ◽  
Vol 2 (1) ◽  
pp. 45-50
Author(s):  
Keyword(s):  
Strong Correlation ◽  
Manufacturing Systems ◽  
Manufacturing Industry ◽  
Initial Study ◽  
Efficient Production ◽  
Product Management ◽  
Nonlinear Behaviour ◽  
Manufacturing Companies ◽  
Manufacturing Performance ◽  
Manufacturing Productivity

Manufacturing systems, in pursuit of cost, time and flexibility optimisation are becoming more and more complex, exhibiting a dynamic and nonlinear behaviour. Unpredictability is a distinct characteristic of such behaviour and effects production planning significantly. Complexity continues to be a challenge in manufacturing systems, resulting in ever-inflating costs, operational issues and increased lead times to product realisation. This challenge must be met with appropriate decision-making by manufacturing companies to secure competitive advantage without compromising sustainability. Assessing complexity realises the reduction and management of complexity sources which contribute to lowering associated engineering costs and time, improves productivity and increases profitability. Therefore, this study was undertaken to investigate the priority level and current achievement of manufacturing performance in Malaysia’s manufacturing industry and the complexity drivers on manufacturing productivity performance. The results showed that Malaysia’s manufacturing industry prioritised product quality and they managed achieved a good on-time delivery performance. However, for other manufacturing performance, there was a difference where the current achievement of manufacturing performances in Malaysia’s manufacturing industry is slightly lower than the priority given to them. The strong correlation of significant value for priority status was observed between efficient production levelling (finished goods) and finish product management while the strong correlation of significant value for current achievement was minimised the number of workstation and factory transportation system. This indicates that complexity drivers have an impact towards manufacturing performance. Consequently, it is necessary to identify complexity drivers to achieve well manufacturing performance.

Sign in / Sign up

Export Citation Format

Share Document