scholarly journals Adsorption and Equilibrium Studies on the Removal of Methyl Red from Aqueous Solution Using White Potato Peel Powder

2017 ◽  
Vol 72 ◽  
pp. 52-64 ◽  
Author(s):  
Conrad K. Enenebeaku ◽  
Nnaemeka J. Okorocha ◽  
Uchechi E. Enenebeaku ◽  
Ikechukwu C. Ukaga
Keyword(s):  
Aqueous Solution ◽  
Dye Adsorption ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Methyl Red ◽  
Potato Peel ◽  
White Potato ◽  
Equilibrium Studies

The potential of white potato peel powder for the removal of methyl red (MR) dye from aqueous solution was investigated. The adsorbent was characterized by FTIR and SEM analysis. Batch adsorption studies were conducted and various parameters such as contact time, adsorbent dosage, initial dye concentration, pH and temperature were studied to observe their effects in the dye adsorption process. The optimum conditions for the adsorption of MR onto the adsorbent (WPPP) was found to be contact (80 mins), pH (2) and temperature (303K) for an initial MR dye concentration of 50mg/l and adsorbent dose of 1.0g. The experimental equilibrium adsorption data of the (MR) dye fitted best and well to the Freundlich isotherm model. The maximum adsorption capacity was found to be 30.48mg/g for the adsorption of MR. The kinetic data conforms to the pseudo – second order kinetic model.

scholarly journals Adsorption, Equilibrium and Kinetic Studies of the Removal of Methyl Violet from Aqueous Solution Using White Potato Peel Powder

2018 ◽  
Vol 80 ◽  
pp. 17-29 ◽  
Author(s):  
Conrad Kenechukwu Enenebeaku ◽  
Ikechukwu C. Ukaga ◽  
Nnaemeka John Okorocha ◽  
Benedict Ikenna Onyeachu
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Methyl Violet ◽  
Dye Adsorption ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Operational Parameters ◽  
Potato Peel ◽  
White Potato

The adsorption of methyl violet (MV) dye onto white potato Peel powder from aqueous solution was investigated by analyzing the operational parameters such as contact time, adsorbent dosage, initial dye concentration, PH and temperature to observe their effects in the dye adsorption process. The optimum conditions for the adsorption of MV onto the adsorbent (WPPP) was found to be contact time (120 mins), PH (10.0) and temperature (303K) for an initial MV dye concentration of 50mg/l and adsorbent dose of 1.0g. The experimental equilibrium adsorption data of the (MV) dye fitted best and well to the freundlich isotherm model. The maximum adsorption capacity was found to be 17.13mg/g for the adsorption of MV. The kinetic data conforms to the pseudo – second order kinetic model.

Parametric and adsorption kinetic studies of methylene blue removal from simulated textile water using durian (Durio zibethinus murray) skin

2015 ◽  
Vol 72 (6) ◽  
pp. 896-907 ◽  
Author(s):  
S. M. Anisuzzaman ◽  
Collin G. Joseph ◽  
D. Krishnaiah ◽  
A. Bono ◽  
L. C. Ooi
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Dye Adsorption ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Durio Zibethinus

In this study, durian (Durio zibethinus Murray) skin was examined for its ability to remove methylene blue (MB) dye from simulated textile wastewater. Adsorption equilibrium and kinetics of MB removal from aqueous solutions at different parametric conditions such as different initial concentrations (2–10 mg/L), biosorbent dosages (0.3–0.7 g) and pH solution (4–9) onto durian skin were studied using batch adsorption. The amount of MB adsorbed increased from 3.45 to 17.31 mg/g with the increase in initial concentration of MB dye; whereas biosorbent dosage increased from 1.08 to 2.47 mg/g. Maximum dye adsorption capacity of the durian skin was found to increase from 3.78 to 6.40 mg/g, with increasing solution pH. Equilibrium isotherm data were analyzed according to Langmuir and Freundlich isotherm models. The sorption equilibrium was best described by the Freundlich isotherm model with maximum adsorption capacity of 7.23 mg/g and this was due to the heterogeneous nature of the durian skin surface. Kinetic studies indicated that the sorption of MB dye tended to follow the pseudo second-order kinetic model with promising correlation of 0.9836 < R2 < 0.9918.

scholarly journals Utilization of Agro-Waste in the Elimination of Dyes from Aqueous Solution: Equilibrium, Kinetic and Thermodynamic Studies

2021 ◽  
Vol 86 ◽  
pp. 11-23
Author(s):  
Nnaemeka John Okorocha ◽  
Chijioke E. Omaliko ◽  
Collins C. Osuagwu ◽  
Maureen O. Chijioke-Okere ◽  
Conrad K. Enenebeaku
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Adsorption Process ◽  
Dye Adsorption ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Thermodynamic Quantities ◽  
Order Kinetic ◽  
Maize Cob ◽  
Adsorbent Dose

The prospective of maize cob powder (MCP) as an effective adsorbent for the removal of malachite green (MG) and congo red (CR) dyes from aqueous solution was investigated. The presence of functional groups and pores on maize cob powder were confirmed by FTIR and SEM analysis. Batch adsorption studies were conducted and various parameters such as contact time, adsorbent dosage, initial dye concentration, pH and temperature were examined to observe their effects in the dyes adsorption process. The optimum conditions for the adsorption of MG and CR onto the adsorbent (MCP) was found to be: contact time (60mins), pH (10.0) and temperature (303 K), adsorbent dose (1 g) for an initial MG dye concentration of 50 mg/L and contact time (80mins), pH (2.0) and temperature (343 K) for an initial CR dye concentration of 50 mg/L and adsorbent dose 1.0 g respectively. The experimental equilibrium adsorption data fitted best and well to the Freundlich isotherm model for CR dye adsorption and Langmuir Isotherm for MG adsorption. The maximum adsorption capacity was found to be 13.02 mg/g and 9.41 mg/g for the adsorption of MG and CR dyes respectively. The kinetic data conformed to the pseudo-second-order kinetic model. Thermodynamic quantities such as Gibbs free energy (ΔG0), enthalpy (ΔH0) and entropy (ΔS0) were evaluated and the negative values of ΔG0, ΔH0 and ΔS0 obtained indicated the spontaneous and exothermic nature of the MG adsorption process while positive enthalpy (ΔH0) indicated an endothermic nature of CR adsorption process.

scholarly journals Removal of Cu(II) from Aqueous Solutions Using Amine-Doped Polyacrylonitrile Fibers

2020 ◽  
Vol 10 (5) ◽  
pp. 1738
Author(s):  
Kay Thwe Aung ◽  
Seung-Hee Hong ◽  
Seong-Jik Park ◽  
Chang-Gu Lee
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Naoh Solution ◽  
Surface Modified ◽  
Pan Fibers

Polyacrylonitrile (PAN) fibers were prepared via electrospinning and were modified with diethylenetriamine (DETA) to fabricate surface-modified PAN fibers. The surface-modified PAN fibers were used to evaluate their adsorption capacity for the removal of Cu(II) from aqueous solutions. Batch adsorption experiments were performed to examine the effects of the modification process, initial concentration, initial pH, and adsorbent dose on the adsorption of Cu(II). Kinetic analysis revealed that the experimental data fitted the pseudo-second-order kinetic model better than the pseudo-first-order model. Adsorption equilibrium studies were conducted using the Freundlich and Langmuir isotherm models, and the findings indicated that the PAN fibers modified with 85% DETA presented the highest adsorption capacity for Cu(II) of all analyzed samples. Moreover, the results revealed that the Freundlich model was more appropriate than the Langmuir one for describing the adsorption of Cu(II) onto the modified fibers at various initial Cu(II) concentrations. The maximum adsorption capacity was determined to be 87.77 mg/g at pH 4, and the percent removal of Cu(II) increased as the amount of adsorbent increased. Furthermore, the surface-modified PAN fibers could be easily regenerated using NaOH solution. Therefore, surface-modified PAN fibers could be used as adsorbents for the removal of Cu(II) from aqueous solutions.

scholarly journals Equilibrium, Kinetics, and Thermodynamics of the Removal of Nickel(II) from Aqueous Solution Using Cow Hooves

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
I. Osasona ◽  
O. O. Ajayi ◽  
A. O. Adebayo
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Room Temperature ◽  
Physical Adsorption ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Equilibrium Data

The feasibility of using powdered cow hooves (CH) for removing Ni2+ from aqueous solution was investigated through batch studies. The study was conducted to determine the effect of pH, adsorbent dosage, contact time, adsorbent particle size, and temperature on the adsorption capacity of CH. Equilibrium studies were conducted using initial concentration of Ni2+ ranging from 15 to 100 mgL−1 at 208, 308, and 318 K, respectively. The results of our investigation at room temperature indicated that maximum adsorption of Ni2+ occurred at pH 7 and contact time of 20 minutes. The thermodynamics of the adsorption of Ni2+ onto CH showed that the process was spontaneous and endothermic. Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm models were used to quantitatively analysed the equilibrium data. The equilibrium data were best fitted by Freundlich isotherm model, while the adsorption kinetics was well described by pseudo-second-order kinetic equation. The mean adsorption energy obtained from the D-R isotherm revealed that the adsorption process was dominated by physical adsorption. Powdered cow hooves could be utilized as a low-cost adsorbent at room temperature under the conditions of pH 7 and a contact time of 20 minutes for the removal of Ni(II) from aqueous solution.

Removal of methylene blue from aqueous solution by Artist's Bracket fungi: kinetic and equilibrium studies

2016 ◽  
Vol 73 (11) ◽  
pp. 2832-2840 ◽  
Author(s):  
Daryush Naghipour ◽  
Kamran Taghavi ◽  
Mehrdad Moslemzadeh
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Removal Efficiency ◽  
Dye Adsorption ◽  
Surface Characteristic ◽  
Coefficient Of Determination ◽  
Order Kinetic ◽  
Operational Parameters ◽  
Equilibrium Studies ◽  
Increasing Temperature

In this study, adsorption of methylene blue (MB) dye onto Artist's Bracket (AB) fungi was investigated in aqueous solution. Fourier transform infrared and scanning electron microscopy were used to investigate surface characteristic of AB fungi. Influence of operational parameters such as pH, contact time, biosorbent dosage, dye concentration, inorganic salts and temperature was studied on dye removal efficiency. With the increase of pH from 3 to 9, removal efficiency increased from 74.0% to 90.4%. Also, it reduced from 99.8% to 81.8% with increasing initial MB concentration from 25 mg L−1 to 100 mg L−1, whereas it increased from 54.7% to 98.7% and from 98.5% to 99.9% with increasing biosorbent dosage from 0.5 g L−1 to 2 g L−1 and with increasing temperature from 25 °C to 50 °C, respectively. Isotherm studies have shown adsorption of MB dye over the AB fungi had a better coefficient of determination (R2) of 0.98 for Langmuir isotherm. In addition, the maximum monolayer adsorption capacity (qm) was 100 mg g−1. Also, the MB dye adsorption process followed pseudo-second-order kinetic. In general, AB fungi particles can be favorable for removal of MB dye from dye aqueous solution with natural pH and high temperature.

scholarly journals Utilization of Charred Water Hyacinth (Jalkumvi) as Biosorbent for Removal of Ca(II) Ion from Aqueous Solution

2021 ◽  
Vol 42 (1) ◽  
pp. 107-114
Author(s):  
Arun Bhujel ◽  
Krishna Wagle ◽  
Bishow Regmi ◽  
Bibek Sapkota ◽  
Bhoj Raj Poudel ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Water Hyacinth ◽  
Chemical Activation ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Adsorbent Surface ◽  
Sem Micrograph ◽  
Pseudo Second Order ◽  
Efficient Alternative

A promising adsorbent, charred water hyacinth (CWH) for the removal of Ca(II) from the aqueous solution was explored by heat treatment of water hyacinth followed by chemical activation with acidified zinc chloride (ZnCl2). The adsorbent was characterized using scanning electron microscopy (SEM) and electron dispersive X-ray (EDX) spectroscopy. Batch adsorption techniques were conducted for Ca(II) adsorption to assess the adsorption isotherm, effect of pH, contact time, initial Ca(II) concentration, adsorbent doses, and adsorption kinetics. The SEM micrograph illustrates the rough and irregular surface morphology and EDX spectra confirm the successful adsorption of Ca(II) on the adsorbent surface. The equilibrium adsorption data better fitted to the Freundlich isotherm model having a maximum adsorption capacity (qmax) of 319.75 mg/g. The highest percentage of adsorption was found at pH 1.5. The adsorption of Ca(II) by CWH decreased at the higher metal concentration and lower adsorbent doses. The adsorption of Ca(II) ions onto CWH followed the pseudo-second-order kinetics model. . Overall, these results suggested that the as-prepared CWH can be used as an eco-friendly, economical and efficient alternative for the removal of Ca(II)  from the aqueous solution.

scholarly journals SURFACE MODIFICATION OF CANARIUM OVATUMENGL.(PILI) SHELL AS ADSORBENT OF LEAD(Pb2+) FROM AQUEOUS SOLUTION

2021 ◽  
Author(s):  
Ernesto Jr. S. Cajucom ◽  
◽  
Lolibeth V. Figueroa ◽  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Cost Effective ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Carboxylic Groups ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Surface Modified

This study was carried out to investigate the efficiency of raw pili shell (RPS) and the surface modified pili shell using EDTA (EMPS) and oxalic acid (OMPS). A comparative study on the adsorption capacity of the adsorbents was performed against lead (Pb2+) from aqueous solution. The adsorbents were characterized by FTIR, which showed higher peak of adsorption bands of carboxylic groups on the acid modified pili shells. Scanning electron microscope orSEM was also used to describe the surface morphology of the adsorbents. The linear form of Langmuir and Freundlich models were applied to represent adsorption data. The calculated equilibrium data of Pb (II) best fitted to Langmuir compare to Freundlich isotherm model with maximum adsorption capacity (qmax) of 27.03 mg/g and 45.45 mg/g using EMPS and OMPS, respectively. Kinetic sorption models were used to determine the adsorption mechanism and the kinetic data of all the adsorbents correlated (R2=1) wellwith the pseudo second order kinetic model. Among the three adsorbents, OMPS shown higher percent removal of lead compared to RPS and EMPS. The large adsorption capacity rate indicated that chemically modified pili shell in present study has great potential to be used as a cost-effective adsorbent for the removal of lead ions from the water.

scholarly journals Adsorption Behaviour of Chromium(VI) onto Surface Modified Sugarcane Waste

2013 ◽  
Vol 28 (1-2) ◽  
pp. 113-122
Author(s):  
Kedar Nath Ghimire ◽  
Deepak Wagle ◽  
Suman Lal Shrestha
Keyword(s):  
Volume Ratio ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Method ◽  
Chromium Vi ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Surface Modified

An effective chemically modified adsorbent based on sugarcane waste has been prepared by treating with concentrated sulphuric acid in 2:1weight/volume ratio. Thus prepared adsorbent has been found to be effective in the adsorption of chromium from aqueous medium. The efficacy of the adsorbent in the removal of chromium was evaluated by batch adsorption method. The effect of initial concentration, contact time and pH of the solution was investigated. The maximum adsorption capacity onto this adsorbent was found to be 195 mg/g at their optimal pH 1 at which unmodified bagasse has only 58 mg/g. The characterization of adsorbent was done by determining surface area and Boehm’s titration method. Freundlich isotherm and pseudo-second order kinetic model gave better explanation of the adsorption process.

scholarly journals Efficient Removal of Copper Ion from Wastewater Using a Stable Chitosan Gel Material

Molecules ◽  
2019 ◽  
Vol 24 (23) ◽  
pp. 4205 ◽  
Author(s):  
Yang ◽  
Chai ◽  
Zeng ◽  
Gao ◽  
Zhang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Metal Ion ◽  
Physical Adsorption ◽  
Copper Ion ◽  
Freundlich Isotherm ◽  
Alkaline Media ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Chitosan Gel

: Gel adsorption is an efficient method for the removal of metal ion. In the present study, a functional chitosan gel material (FCG) was synthesized successfully, and its structure was detected by different physicochemical techniques. The as-prepared FCG was stable in acid and alkaline media. The as-prepared material showed excellent adsorption properties for the capture of Cu2+ ion from aqueous solution. The maximum adsorption capacity for the FCG was 76.4 mg/g for Cu2+ ion (293 K). The kinetic adsorption data fits the Langmuir isotherm, and experimental isotherm data follows the pseudo-second-order kinetic model well, suggesting that it is a monolayer and the rate-limiting step is the physical adsorption. The separation factor (RL) for Langmuir and the 1/n value for Freundlich isotherm show that the Cu2+ ion is favorably adsorbed by FCG. The negative values of enthalpy (ΔH°) and Gibbs free energy (ΔG°) indicate that the adsorption process are exothermic and spontaneous in nature. Fourier transform infrared (FTIR) spectroscopy and x-ray photoelectron spectroscopy (XPS) analysis of FCG before and after adsorption further reveal that the mechanism of Cu2+ ion adsorption. Further desorption and reuse experiments show that FCG still retains 96% of the original adsorption following the fifth adsorption–desorption cycle. All these results indicate that FCG is a promising recyclable adsorbent for the removal of Cu2+ ion from aqueous solution.

Sign in / Sign up

Export Citation Format

Share Document