scholarly journals Control of Laminar Boundary-Layer Separation Using Steady and Harmonic Vortex Generator Jets

2018 ◽  
Author(s):  
Aria Alimi ◽  
Olaf Wünsch
Keyword(s):  
Boundary Layer ◽  
Flow Control ◽  
Laminar Boundary Layer ◽  
Active Flow Control ◽  
Vortex Generator ◽  
Boundary Layer Separation ◽  
Transition To Turbulence ◽  
Momentum Exchange ◽  
Layer Separation ◽  
Vortex Generator Jets

Active flow control of canonical laminar separation bubbles by steady and harmonic vortex generator jets (VGJs) was investigated using direct numerical simulations. Both control strategies were found to be effective in controlling the laminar boundary-layer separation. However, the present results indicate that using the same blowing amplitude, harmonic VGJs were more effective and efficient in reducing the separated region than the steady VGJs considering the fact that the harmonic VGJs use less momentum than the steady case. For steady VGJs, longitudinal structures formed immediately downstream of injection location led to formation of hairpin-type vortices causing an earlier transition to turbulence. Symmetric hairpin vortices were shown to develop downstream of the forcing location for the harmonic VGJs as well. However, the increased control effectiveness for harmonic VGJs flow control strategy is attributed to the fact that shear-layer instability mechanism was exploited. As a result, disturbances introduced by VGJs were strongly amplified leading to development of large-scale coherent structures, which are very effective in increasing the momentum exchange, thus, limiting the separated region.

scholarly journals Control of Laminar Boundary-Layer Separation Using Steady and Harmonic Vortex Generator Jets

2018 ◽  
Author(s):  
Aria Alimi ◽  
Olaf Wünsch
Keyword(s):  
Boundary Layer ◽  
Flow Control ◽  
Laminar Boundary Layer ◽  
Active Flow Control ◽  
Vortex Generator ◽  
Boundary Layer Separation ◽  
Transition To Turbulence ◽  
Momentum Exchange ◽  
Layer Separation ◽  
Vortex Generator Jets

Active flow control of canonical laminar separation bubbles by steady and harmonic vortex generator jets (VGJs) was investigated using direct numerical simulations. Both control strategies were found to be effective in controlling the laminar boundary-layer separation. However, the present results indicate that using the same blowing amplitude, harmonic VGJs were more effective and efficient in reducing the separated region than the steady VGJs considering the fact that the harmonic VGJs use less momentum than the steady case. For steady VGJs, longitudinal structures formed immediately downstream of injection location led to formation of hairpin-type vortices causing an earlier transition to turbulence. Symmetric hairpin vortices were shown to develop downstream of the forcing location for the harmonic VGJs as well. However, the increased control effectiveness for harmonic VGJs flow control strategy is attributed to the fact that shear-layer instability mechanism was exploited. As a result, disturbances introduced by VGJs were strongly amplified leading to development of large-scale coherent structures, which are very effective in increasing the momentum exchange, thus, limiting the separated region.

scholarly journals Numerical Investigation of Steady and Harmonic Vortex Generator Jets Flow Separation Control

Fluids ◽  
2018 ◽  
Vol 3 (4) ◽  
pp. 94 ◽  
Author(s):  
Aria Alimi ◽  
Olaf Wünsch
Keyword(s):  
Flow Control ◽  
Large Scale ◽  
Active Flow Control ◽  
Vortex Generator ◽  
Boundary Layer Separation ◽  
Transition To Turbulence ◽  
Momentum Exchange ◽  
Hairpin Vortices ◽  
Flow Separation Control ◽  
Vortex Generator Jets

Active flow control of canonical laminar separation bubbles by steady and harmonic vortex generator jets (VGJs) was investigated using direct numerical simulations. Both control strategies were found to be effective in controlling the laminar boundary-layer separation. However, the present results indicate that using the same blowing amplitude, harmonic VGJs were more effective and efficient at reducing the separated region than the steady VGJs considering the fact that the harmonic VGJs use less momentum than the steady case. For steady VGJs, longitudinal structures forming immediately downstream of the injection location led to the formation of hairpin-type vortices, causing an earlier transition to turbulence. Symmetric hairpin vortices were shown to develop downstream of the forcing location for the harmonic VGJs, as well. However, the increased control effectiveness for harmonic VGJs’ flow control strategy is attributed to the fact that the shear-layer instability mechanism was exploited. As a result, disturbances introduced by VGJs were strongly amplified, leading to the development of large-scale coherent structures, which are very effective at increasing the momentum exchange, thus limiting the separated region.

Micro vortex generator control of axisymmetric high-speed laminar boundary layer separation

Shock Waves ◽  
2014 ◽  
Vol 25 (5) ◽  
pp. 521-533 ◽  
Author(s):  
D. Estruch-Samper ◽  
L. Vanstone ◽  
R. Hillier ◽  
B. Ganapathisubramani
Keyword(s):  
Boundary Layer ◽  
Laminar Boundary Layer ◽  
High Speed ◽  
Vortex Generator ◽  
Boundary Layer Separation ◽  
Layer Separation ◽  
Micro Vortex Generator

Design of a Low Solidity Flow-Controlled Stator With Coanda Surface in a High Speed Compressor

2008 ◽  
Author(s):  
Y. Guendogdu ◽  
A. Vorreiter ◽  
J. R. Seume
Keyword(s):  
Boundary Layer ◽  
Flow Control ◽  
High Speed ◽  
Design Method ◽  
Active Flow Control ◽  
Suction Side ◽  
Boundary Layer Separation ◽  
Synthetic Jets ◽  
Layer Separation ◽  
Active Flow

Aerofoil active flow control has been attempted to increase the permissible loading of boundary layers in gas turbine components. Steady suction and blowing, pulsing and synthetic jets are all means to remove low energy flow, replace momentum deficits, or promote mixing to inhibit boundary layer separation. A curved surface near the trailing edge (“Coanda surface”) is another technique used to control aerofoil boundary layer separation. This paper presents the design of a stator with active flow control for a high speed compressor using a Coanda surface. The Coanda surface is located behind an injection slot on the aerofoil suction side of the first stage of a four-stage high speed research compressor. The design method and the present results are based on steady numerical calculations. The design intent is to reduce the number of vanes. This active flow control is used to maintain the flow exit angle of the reference stator despite the resulting increase in stator loading. It is shown that the solidity of the flow-controlled stator can be decreased by 25% with a blowing rate of 0.5% of the main mass flow.

Transient Performance of Separated Flows: Characterization and Active Flow Control

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
J. Saavedra ◽  
G. Paniagua
Keyword(s):  
Boundary Layer ◽  
Flow Control ◽  
Active Flow Control ◽  
Boundary Layer Separation ◽  
Low Pressure ◽  
Separated Flows ◽  
Mean Flow ◽  
Recirculation Bubble ◽  
Layer Separation ◽  
Inlet Conditions

The aerothermal performance of the low-pressure turbine in unmanned aerial vehicles is significantly abated at high altitude, due to boundary layer separation. Different flow control strategies have been proposed to prevent boundary layer separation, such as dielectric barrier discharges (DBD) and synthetic jets. However, the optimization of the control approach requires a better characterization of the separated regions at transient conditions. The present investigation analyzes the behavior of separated flows, reporting the inception and separation length, allowing the development of efficient flow control methods under nontemporally uniform inlet conditions. The development of separated flows was investigated with numerical simulations including Unsteady Reynolds average Navier–Stokes (URANS) and large Eddy simulations (LES). The present research was performed on a wall-mounted hump, which imposes a pressure gradient representative of the suction side of low pressure turbines. Through sudden flow accelerations, we looked into the dynamic response of the shear layer detachment as it is modulated by the mean flow evolution. Similarly, we studied the behavior of the recirculation bubble under periodic disturbances imposed at various frequencies ranging from 10 to 500 Hz, at which the Reynolds number oscillates between 40,000 and 180,000. As a first step into the flow control, we added a slot to allow flow injection and ingestion upstream of the separation inception. Exploring the behavior of the separated region at different conditions, we defined the envelope for its periodic actuation. We found that by matching the actuator frequency with the frequency response of the separated region, the performance of the actuation is boosted.

Sign in / Sign up

Export Citation Format

Share Document