scholarly journals Improving Student Learning Outcomes Through Video Aided Problem Based Learning Model

Author(s):  
Ria Titis Pratiwi

<p><em>This study aims to improve the learning outcomes of the third grade students of SD Negeri 05 Bantarbolang on the sub-theme of Aneka Benda around me through a video-assisted problem-based learning model. This research is a Classroom Action Research (PTK) which consists of three cycles, where each cycle is carried out in one face-to-face. The Action Plan for each cycle in the CAR is divided into four activities, namely Planning, Implementation, Observation, and Reflection. The data collection technique in this study is a formative test. The instrument used to collect data was a learning outcome test. Completeness of student learning outcomes in cycle I only reached 60% with a mean of 77, in cycle II student learning completeness reached 87% with a mean of 81, and in cycle III student learning completeness reached 87% with a mean of 83. The results of this study indicate that the application of the learning model video-assisted problem-based learning can improve student learning outcomes.</em></p>

2019 ◽  
Vol 2 (2) ◽  
pp. 272-289
Author(s):  
KARLOF TAMPUBOLON

This study aims to increase student learning outcomes on mathematics subjects in the material measuring angles with standard units by applying the Problem Based Learning learning model at SDN 106788 PURWODADI, Sunggal District, Deli Serdang Regency. This type of research is Classroom Action Research. The subjects of this study were students of class IV-B, which amounted to 29 students consisting of 11 male students and 18 female students. This research was conducted in two cycles. Data from the results of this study were obtained from tests of student learning outcomes and observations.Based on the results of the study, it was shown that there was an increase in the learning outcomes of material students measuring angles with simple aircraft standard units by applying the Problem Based Learning learning model. This can be seen from improving student learning outcomes every cycle. In the pre-test of student learning outcomes carried out before the application of learning there were 4 students (32%) completed learning while 17 students (68%) had not yet finished with a grade point average of 50.93. In cycle 1 completeness of student learning outcomes there were 17 students (72%) completed in 8 students (28%) not yet completed with an average value of 70.4. The results of teacher observation amounted to 67.27% with a good category while the observations of students amounted to 64% with sufficient categories. Student learning outcomes have increased to 23 students (92%) completed 2 students (8%) have not been completed while the average value of 86.4. Teacher observation results have increased by 92.72% with very good categories while student observations amounted to 92% with very good categories. By looking at the percentage of learning outcomes and observations it can be concluded that the Application of Problem Based Learning Learning Models can improve student learning outcomes.


2019 ◽  
Vol 8 (1) ◽  
Author(s):  
Gede Agus Hendika ◽  
Made Santo Gitakarma ◽  
Nyoman Santiyadnya

This study was carried out aimed at improving student learning outcomes in Computer Assembling subjects in the subject matter and Troubleshooting BIOS configuration concepts in class X TKJ 1 SMK Negeri 3 State through problem-based learning model (Problem Based Learning). This type of research is action research class (class action research) carried out in 2 cycles, the first cycle consists of 3 meetings as well as to the second cycle. Subjects in this study were students of class X TKJ 1 SMK Negeri 3 countries totaling 34 people. The object of this research is student learning outcomes by implementing problem-based learning model (Problem Based Learning). The necessary data obtained using the method in the form of a multiplechoice test (Multiple Choice). Achievement test cycle I and cycle II as many as 20 items. Based on the analysis of data on learning outcomes in Computer Assembling subjects in the first cycle obtained an average percentage of student learning outcomes in classical amounted 55.88%. In the second cycle the average percentage of student learning outcomes in classical amounted 85.29%. The results showed an increase from cycle I to cycle II of 29.4%. Thus, the conclusions of this study an increase in student learning outcomes through the application of problem-based learning model (Problem Based Learning).


2021 ◽  
Vol 2 (2) ◽  
pp. 131-136
Author(s):  
Afriliandy Tumbelaka ◽  
Xaverius Erick Lobja ◽  
Ellen Eva Poli

The background of the research is an effort to develop the quality and explore the potential of students. Teachers are strived to use the right learning model, namely problem-based learning models combined with online learning methods (learning from home) that have been decided by the Ministry of Education and Culture during the Covid-19 pandemic. The purpose of this study was to determine the application of problem-based learning models in improving student learning outcomes in geography subjects at SMAN 1 Langowan. The method used is a quasi-experimental design with a pretests-posttests control group design. The research variable with the independent variable is the problem-based learning model and the dependent variable is the learning outcome. The results showed that the problem-based learning model was effective and efficient to improve student learning outcomes. The comparison of learning outcomes shows the experimental class with 76.2 pretests and 87.7 posttests and the control class with 74.4 pretests and 81.8 posttests. It also encourages students to be more active and creative in overcoming the problems encountered in learning.


Author(s):  
Diyana CD

<em>This research was carried out with the aim of improving student learning outcomes in science subjects about material using the Problem Based Learning model for fifth grade students at SD Negeri Limbangan</em><em> 01, Losari District, Brebes Regency, for the 2019/2020 academic year with a total of 11 students.The research shows an increase in the percentage of learning outcomes, this can be seen from the KKM completeness of students from pre-cycle activities, first cycles, and second cycles. The average value of students in the initial conditions (pre-cycle) is 53.64 with classical completeness of 45%. Cycle I was 67.27 with classical completeness of 73%. Cycle II was 83.64 with 91% classical completeness. Thus, it can be concluded that the use of Problem Based Learning (PBL) in online learning can improve student learning outcomes in learning science about material</em>


2020 ◽  
Vol 9 ◽  
pp. 114-118
Author(s):  
Mesterjon ◽  
Suwarni ◽  
Diah Selviani

The implementation of this research is Classroom Action Research (CAR). The data of SMKS 4 PGRI Bengkulu city. students from 14 students were only 5 students (36%) who had received Good grades, while 9 students (64%) needed guidance or had not reached KKM and based on the above background, the research problem can be formulated, namely how to apply the Project Based Learning model to improve student learning outcomes. The Method was conducted in two cycles with the flow of research, namely: action plan, implementation of action, observation and reflection. The results of the research that have been carried out can be concluded that the application of the Project Based Learning model can improve the quality of student learning process activities, by giving projects to students, providing feedback to students and motivating students. Learning models based on Project Based Learning can also improve the quality of student learning outcomes and activities. In each cycle there is an increase, this is seen from the results of the analysis of the cycle I test until the second cycle. Student learning outcomes, namely for the first cycle the average value of students is 71.66 with classical learning completeness 83.33%, increasing in the second cycle with an average value of 80.42 with 100% classical learning completeness. This research had a weakness which is the students had not ability to their kognitif aspect because to lowest the teacher was not creativity to leraning process in the classrooom.


2020 ◽  
Vol 4 (2) ◽  
pp. 78-87
Author(s):  
Abdul Atsar ◽  
Tasum Tasum

The purpose of this study was to find a solution to the problem in applying the NHT (Numbered Heads Together) cooperative learning model to improve student learning outcomes in Class XII Social Studies Major of SMA Mathla�ul Anwar High School Batujaya Karawang. This study used a classroom action research method. The study was conducted in three cycles and each cycle consists of 4 steps, namely planning, acting/implementing, observing, and reflecting. The results of the study show students' improvement in understanding the legal protection and law enforcement materials after the implementation of NHT cooperative learning model. By using the NHT model, the students find it easier to understand the concepts that used to be considered difficult. Before implementing the model, the understanding level of the students at SMA Mathla�ul Anwar Batujaya Karawang was relatively low because some students� scores were below the minimum completeness criteria. After the actions in the three cycles were completed, the student learning outcomes increase. The students� average score before the treatment was 60.16. It increased to 68.25 in cycle 1, 72.50 in cycle 2, and 80.25 in cycle 3. This increase indicates that the NHT model can help the students improve their understanding. In the learning process using this model, the students feel that they are systematically guided in understanding the materials. Moreover, it helps the students in improving their ability to explain the learning materials and to provide examples on the legal protection and law enforcement materials in the learning process using the NHT cooperative learning model.


Perspektif ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 17-22
Author(s):  
Oriza Candra ◽  
Doni Tri Putra Yanto ◽  
Nazirul Imam

Student learning outcomes in learning is very important to be used as a reference for indicate of successful in learning. The observation result at grade X TITL SMKN 1 Pariaman identified that there are several problems that influence student learning outcomes, such as communication in learning process just one - way, the students did not master the contents, students tend to be afraid to ask the question, the students out of the classroom and talk with their seatmate. Consequently most of student learning outcomes were under KKM that seen from the pretest. To overcome this problem, research is conducted which seeks to see  an increase in student learning outcomes in subjects " Using the Measurement Results " in Learning Model Cooperative Script at grade X TITL  SMKN 1 Pariaman. Type of this research was quasi experiment with one group pretest – posttest design. Subjects were students at grade X TITL SMKN 1 Pariaman for 2014/2015 academic year that consists of 40 students. Data were collected through the test of pretest - posttest results, 40 objective questions for the pretest and 34 objective questions for the posttest. Improving student learning outcomes calculated by the formula Gain Score of pretest - posttest. This research indicated that there is an increase in student learning outcomes in subjects “Using Measurement Results” in Learning Model Cooperative Script at grade X TITL SMKN 1 Pariaman.


2013 ◽  
Vol 2 (1) ◽  
pp. 25
Author(s):  
Hayati . ◽  
Retno Dwi Suyanti

The objective in this research: (1) Determine a better learning model to improve learning outcomes physics students among learning model Inquiry Training based multimedia and Inquiry Training learning model. (2) Determine the level of motivation to learn in affects physics student learning outcomes. (3) Knowing the interactions between the model of learning and motivation in influencing student learning outcomes. This research is a quasi experimental. The population in this research was all students in class XI SMA Negeri 1 T.P Sunggal Semester I 2012/2013. The sample of this research was consisted of two classes with a sample of 70 peoples who are determined by purposive sampling, the IPA XI-2 as a class experiment using a model-based multimedia learning Training Inquiry as many as 35 peoples and XI IPA-3 as a control class using learning model Inquiry Training 35 peoples. Hypotheses were analyzed using the GLM at significant level of 0.05 using SPSS 17.0 for Windows. Based on data analysis and hypothesis testing conducted found that: (1) Training Inquiry-based multimedia learning model in improving student learning outcomes rather than learning model physics Inquiry Training. (2) The results of studying physics students who have high motivation to learn better than students who have a low learning motivation. (3) From this research there was an interaction between learning model inquiry-based multimedia training and motivation to study on learning outcomes of students.


Author(s):  
Christin Tulaseket ◽  
F Leiwakabessy ◽  
Dominggus Rumahlatu

Background: This study aims to determine the effect of the application of the learning model of the horay course review to improve student learning outcomes of teaching material on the classification system of living things in class X of SMA Negeri 14 Ambon. Method: Samples from this study were students of class X1 with 23 students. This type of research is descriptive research to see student learning outcomes which consists of 3 factors, namely physical, cognitive and psychomotor. The instruments used in this study were test instruments in the form of initial tests and final tests. Results: The results of this study show that there is a significant effect by using the learning review horay learning model on improving student learning outcomes during the implementation of the learning model of the course review horay. Conclusion: Based on the results of the study it can be concluded that the use of the Course Review Horay learning model can improve the learning outcomes of class X1 students at SMA Negeri 14 Ambon. This can be seen from the results of the final test which is very satisfying from the results of the initial test. Presentation of student grades during the initial test is 13% and the final test score reaches 100%.


Sign in / Sign up

Export Citation Format

Share Document