scholarly journals On-line controlled high sensitivity spectrophotometer system using a flow through absorbance cell.

1989 ◽  
Vol 38 (4) ◽  
pp. T54-T58 ◽  
Author(s):  
Keiichi SATOH ◽  
Yoichi KIKUCHI ◽  
Toshio SUZUKI ◽  
Kiyoshi SAWADA
1995 ◽  
Vol 3 (10) ◽  
pp. 12-13 ◽  
Author(s):  
Kenneth H. Downing

Over the last several years the long-awaited revolution in direct-digital readout systems has begun, with the introduction of efficient slow-scan CCD cameras. Earlier, the introduction of video cameras to electron microscopes had brought a quantum leap in the speed and efficiency of carrying out a host of operations. The high sensitivity of the video cameras provided the ability to see the image in much more detail and at a lower beam intensity than had been previously possible by viewing the fluorescent screen. The ability to assess, on line, characteristics such as specimen quality and image focus, even qualitatively, gave feedback to the operator that previously took hours to obtain. Due to the low resolution of these video systems, however, they were rarely useful for data recording.


Clay Minerals ◽  
1996 ◽  
Vol 31 (4) ◽  
pp. 549-556 ◽  
Author(s):  
I. C. Hinds ◽  
P. J. Ridler ◽  
B. R. Jennings

AbstractThe growth and decay rates of rapid, induced electro-optical phenomena in dilute colloidal suspensions are characteristic of the geometry of the solute particles. The speed of measurement renders such methods especially relevant for fast, in situ analyses of the size and size distribution of colloids in practical, industrial situations where these properties may be undergoing continuous change. The principles of the measurement of electrically induced birefringence using pulsed fields is outlined and used to study vermiculite suspensions as they undergo size reduction in an ultrasonic field. The high sensitivity of the method to both the particle size range and the form of the distribution function is indicated. The use of the method for on-line monitoring of dilute mineral suspensions for the indication and control of aggregated, dissolving or growing media is discussed.


Separations ◽  
2019 ◽  
Vol 6 (1) ◽  
pp. 16 ◽  
Author(s):  
Ana Argente-García ◽  
Lusine Hakobyan ◽  
Carmen Guillem ◽  
Pilar Campíns-Falcó

A method involving the collection and determination of organic and inorganic gunshot residues on hands using on-line in-tube solid-phase microextraction (IT-SPME) coupled to miniaturized capillary liquid chromatography with diode array detection (CapLC-DAD) and scanning electron microscopy coupled to energy dispersion X-ray (SEM-EDX), respectively, for quantifying both residues was developed. The best extraction efficiency for diphenylamine (DPA) as the main target among organic residues was achieved by using a dry cotton swab followed by vortex-assisted extraction with water, which permits preservation of inorganic residues. Factors such as the nature and length of the IT-SPME extractive phase and volume of the sample processed were investigated and optimized to achieve high sensitivity: 90 cm of TRB-35 (35% diphenyl, 65% polydimethylsiloxane) capillary column and 1.8 mL of the processed sample were selected for the IT-SPME. Satisfactory limit of detection of the method for analysis of DPA deposited on shooters’ hands (0.3 ng) and precision (intra-day relative standard deviation, 9%) were obtained. The utility of the described approach was tested by analyzing several samples of shooters’ hands. Diphenylamine was found in 81% of the samples analyzed. Inorganic gunshot residues analyzed by SEM-EDX were also studied in cotton swab and lift tape kit samplers. Optical microscopy was used to see the inorganic gunshot residues in the cotton swab samplers. The lift tape kits provided lesser sensitivity for DPA than dry cotton swabs—around fourteen times. The possibility of environmental and occupational sources could be eliminated when DPA was found together with inorganic residues. Then, the presence of inorganic and organic residues in a given sample could be used as evidence in judicial proceedings in the forensic field.


1995 ◽  
Vol 32 (8) ◽  
pp. 149-155 ◽  
Author(s):  
Jürgen Schmitt ◽  
David Nivens ◽  
David C. White ◽  
Hans-Curt Flemming

Biofilms play an important role as sorbents in the process of distribution of pollutants in surface water systems. The sorption properties of biofilms will influence the kind and the amount of sorbed substances. The heterogeneity of biofilms provides different sorption sites which exhibit a different sorption preference and capacity. As dynamic systems, biofilms will respond physiologically to their environment. Thus, the sorption of one substance may lead to a change in the composition of the EPS or other biofilm components and further alter the original sorption properties. In this paper, the influence of toluene on a biofilm was investigated. As a suitable method, FTIR-ATR spectroscopy was applied. The method is non destructive and allows the observation of biofilm formation and behaviour on line and in situ. A biofilm was allowed to form in ATR flow-through cells. The test strain was genetically engineered and contained a bioluminescent reporter gene which was switched on when toluene was metabolized. Thus, the degree of toluene degradation activity could be observed with great sensitivity. The FTIR spectrometer contained three flow-through cells which could be operated in parallel: one was run with sterile medium only, one with medium and bacteria, and one with medium, bacteria and toluene. This arrangement allowed the discrimination of the biofilm response from other effects. The IR spectrum showed specific bands of proteins, polysaccharides, phosphoryl compounds and other groups of molecules. A significant increase of EPS-polysaccharide formation was observed at a toluene level of 5 mg L−1. At 15 mg L−1, significantly more carboxyl groups were formed. Thus, the effect of the lipophilic organic pollutant toluene increased the amount of negatively charged groups and, consequently, the sorption capacity for metal cations. This result indicates that biofilms respond in a complex manner to different sorbates and alter their environmental properties.


1979 ◽  
Vol 25 (1) ◽  
pp. 39-43 ◽  
Author(s):  
H F Osswald ◽  
R Asper ◽  
W Dimai ◽  
W Simon

Abstract We describe a flow-through system with an ion-selective electrode for measurement of blood potassium ion concentration, continuously and on-line off the extracorporeal blood circulation in an operating theater during human open-heart surgery. Comparison measurements were made with the SMA flame photometer (blood plasma) and an Orion SS 30 sodium/potassium analyzer (whole blood). The potassium concentration values obtained with the flow-through system agree well with the ones determined with the flame photometer. The time delay of the measurement with the flow-through system was relatively long (2 min) but delays of only 10--20 s seem feasible. Short time delays can deepen insight and simplify rational treatment under surgery conditions.


The Analyst ◽  
2012 ◽  
Vol 137 (8) ◽  
pp. 1824 ◽  
Author(s):  
Jingya Qu ◽  
Hui Chen ◽  
Chao Lu ◽  
Zhihua Wang ◽  
Jin-Ming Lin

Sign in / Sign up

Export Citation Format

Share Document