scholarly journals Deterministic and probabilistic evaluations for uncertainty in pipe fracture parameters in leak-before-break and in-service flaw evaluations

1996 ◽  
Author(s):  
N. Ghadiali ◽  
G. Wilkowski ◽  
S. Rahman ◽  
Y.H. Choi
Keyword(s):  
Fracture Parameters ◽  
Leak Before Break

Fracture parameters of chevron-notched Al2O3/Nb sandwich specimens

2004 ◽  
Vol 95 (9) ◽  
pp. 779-784 ◽  
Author(s):  
Martin Bartsch ◽  
Zhe-Feng Zhang ◽  
Christina Scheu ◽  
Manfred Rühle ◽  
Ulrich Messerschmidt
Keyword(s):  
Fracture Parameters

Effect of Concrete Mixture Composition on Acoustic Emission and Fracture Parameters Obtained from Three-Point Bending Test

2015 ◽  
Vol 1100 ◽  
pp. 152-155
Author(s):  
Libor Topolář ◽  
Hana Šimonová ◽  
Petr Misák
Keyword(s):  
Acoustic Emission ◽  
Bending Test ◽  
Mixture Composition ◽  
Three Point Bending ◽  
Concrete Mixtures ◽  
Fracture Parameters ◽  
Fracture Tests ◽  
Stress Behaviour ◽  
Bending Fracture ◽  
Fracture Processes

This paper reports the analysis of acoustic emission signals captured during three-point bending fracture tests of concrete specimens with different mixture composition. Acoustic emission is an experimental tool well suited for monitoring fracture processes in material. The typical acoustic emission patterns were identified in the acoustic emission records for three different concrete mixtures to further describe the under-the-stress behaviour and failure development. An understanding of microstructure–performance relationships is the key to true understanding of material behaviour. The acoustic emission results are accompanied by fracture parameters determined via evaluation of load versus deflection diagrams recorded during three-point bending fracture tests.

Effects of Weld Strength Mismatch on Estimation Procedures for J and CTOD Fracture Parameters Using SE(B) Specimens

2007 ◽  
Author(s):  
Gustavo H. B. Donato ◽  
Claudio Ruggieri
Keyword(s):  
Mouth Opening ◽  
Estimation Procedure ◽  
Primary Objective ◽  
Weld Strength ◽  
Crack Mouth Opening Displacement ◽  
Opening Displacement ◽  
Fracture Parameters ◽  
Wide Range ◽  
Estimation Procedures ◽  
Fracture Specimens

This work presents an exploratory development of J and CTOD estimation procedures for welded fracture specimens under bending based upon plastic eta factors and plastic rotation factors. The techniques considered include: i) estimating J and CTOD from plastic work and ii) estimating CTOD from the plastic rotational factor. The primary objective is to gain additional understanding on the effect of weld strength mismatch on estimation techniques to determine J and CTOD fracture parameters for a wide range of a/W-ratios and mismatch levels. Very detailed non-linear finite element analyses for plane-strain models of SE(B) fracture specimens with center cracked, square groove welds provide the evolution of load with increased load-line displacement and crack mouth opening displacement which are required for the estimation procedure. The results show that levels of weld strength mismatch within the range ±20% mismatch do not affect significantly J and CTOD estimation expressions applicable to homogeneous materials, particularly for deeply cracked fracture specimens. The present analyses, when taken together with previous studies, provide a fairly extensive body of results which serve to determine parameters J and CTOD for different materials using bend specimens with varying geometries and mismatch levels.

Sign in / Sign up

Export Citation Format

Share Document