High Speed FPGA Based 128-bit Advance Encryption Standard (AES)

Author(s):  
Ibrahem M. T. Hamidi ◽  
Farah S. H. Al-aassi

Aim: Achieve high throughput 128 bits FPGA based Advanced Encryption Standard. Background: Field Programmable Gate Array (FPGA) provides an efficient platform for design AES cryptography system. It provides the capability to control over each bit using HDL programming language such as VHDL and Verilog which results an output speed in Gbps rang. Objective: Use Field Programmable Gate Array (FPGA) to design high throughput 128 bits FPGA based Advanced Encryption Standard. Method: Pipelining technique has used to achieve maximum possible speed. The level of pipelining includes round pipelining and internal component pipelining where number of registers inserted in particular places to increase the output speed. The proposed design uses combinatorial logic to implement the byte substitution. The s-box implemented using composed field arithmetic with 7 stages of pipelining to reduce the combinatorial logic level. The presented model has implemented using VHDL in Xilinix ISETM 14.4 design tool. Result: The achieved results were 18.55 Gbps at a clock frequency of 144.96 MHz and area of 1568 Slices in Spartan3 xc3s1000 hardware. Conclusion: The results show that the proposed design reaches a high throughput with acceptable area usage compare with other designs in the literature.

2019 ◽  
Vol 29 (09) ◽  
pp. 2050136
Author(s):  
Yuuki Tanaka ◽  
Yuuki Suzuki ◽  
Shugang Wei

Signed-digit (SD) number representation systems have been studied for high-speed arithmetic. One important property of the SD number system is the possibility of performing addition without long carry chain. However, many numbers of logic elements are required when the number representation system and such an adder are realized on a logic circuit. In this study, we propose a new adder on the binary SD number system. The proposed adder uses more circuit area than the conventional SD adders when those adders are realized on ASIC. However, the proposed adder uses 20% less number of logic elements than the conventional SD adder when those adders are realized on a field-programmable gate array (FPGA) which is made up of 4-input 1-output LUT such as Intel Cyclone IV FPGA.


1992 ◽  
Vol 23 (7) ◽  
pp. 561-568 ◽  
Author(s):  
J. Birkner ◽  
A. Chan ◽  
H.T. Chua ◽  
A. Chao ◽  
K. Gordon ◽  
...  

2008 ◽  
Vol 16 (23) ◽  
pp. 18984 ◽  
Author(s):  
Ariya Hidayat ◽  
Benjamin Koch ◽  
Hongbin Zhang ◽  
Vitali Mirvoda ◽  
Manfred Lichtinger ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document