MATHEMATICAL MODEL OF DEFINING OPTIMAL CRYSTALLIZER HEIGHT IN CONTINUOUS CASTING MACHINE

2017 ◽  
Author(s):  
F.V. Nedopekin ◽  
V.V. Belousov ◽  
V.V. Bodryaga ◽  
V.I. Bondarenko ◽  
A.T. Stepanov
Keyword(s):  
Mathematical Model ◽  
Continuous Casting ◽  
Continuous Casting Machine ◽  
Casting Machine

The Mathematical Model of Radial Forging of a Hollow Continuously-Cast Ingot

2000 ◽  
Author(s):  
Nikolai A. Babailov ◽  
Serguey P. Bourkine
Keyword(s):  
Mathematical Model ◽  
Continuous Casting ◽  
Continuous Casting Machine ◽  
Casting Machine ◽  
Combined Loading ◽  
Radial Forging ◽  
Technological Parameters ◽  
Cast Ingot ◽  
Continuously Cast ◽  
The Mathematical Model

Abstract The problem of a detailed research of radial forging is associated with the technological process of direct combination of continuous casting and metal forming. The mathematical model of multi-die radial forging is developed. The strain state of radial forging is investigated. The dependences of main characteristics on technological parameters for radial forging with combined loading (torsion, tension or backing) are received by the variational method. The thermal analysis of hollow continuously cast ingot during deformation is executed. The verification of mathematical model adequacy is executed by experimental researches. The design of six-dies forging unit for direct combination with vertical continuous-casting machine is developed.

scholarly journals Investigation of internal defects formation reasons in copper billet obtained at rotary continuous casting machine (CCM)

2020 ◽  
Vol 28 (1) ◽  
pp. 48-54
Author(s):  
A.N. Smirnov ◽  
◽  
V.E. Ukhin ◽  
A.P. Verzilov ◽  
Ali Naseri ◽  
...  
Keyword(s):  
Continuous Casting ◽  
Continuous Casting Machine ◽  
Casting Machine ◽  
Internal Defects

Sensorless electric drive of the mixture supply system in the mold of the continuous steel casting installation

2021 ◽  
pp. 16-21
Author(s):  
K. V. Litsin ◽  
D. M. Utyamishev
Keyword(s):  
Continuous Casting ◽  
Electric Drive ◽  
Continuous Casting Machine ◽  
Casting Machine ◽  
Steel Production ◽  
Angular Speed ◽  
Quality Level ◽  
Actual Direction ◽  
Vector Control System ◽  
The Cost

The system of automatic feeding of the slag-forming mixture into the mold of the continuous casting machine was investigated in this article. The necessity of using a slag-forming mixture in the process of steel production has been substantiated. The proofs are given that the consumption of the slag-forming mixture significantly affects the cost of the final product. The quality level of the final product depends on the uniformity and consistency of the mixture supply to the crystallizer. Therefore, the actual direction is the automation of the process of feeding the slag-forming mixture into the mold of the continuous casting machine. The description of the developed automatic installation, which implements the supply of slag-forming mixture, is presented. The necessity of using a sensorless electric drive for moving the trolley has been substantiated. A simulation model of a bogie electric drive with a vector control system based on sensorless determination of the angular speed of the engine has been developed. The description of the method for determining the angular speed of the motor based on the known values of phase voltages is given. The simulation of the developed electric drive system in the Matlab Simulink program, confirming the adequacy of the developed system. The introduction of a sensorless electric drive into the system for feeding the mixture into the mold of the continuous casting machine will increase the reliability of the entire system and reduce its weight and dimensions.

scholarly journals Study of the Influence of Intermix Conditions on Steel Cleanliness

Metals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 852 ◽  
Author(s):  
Branislav Bul’ko ◽  
Marek Molnár ◽  
Peter Demeter ◽  
Dana Baricová ◽  
Alena Pribulová ◽  
...  
Keyword(s):  
Continuous Casting ◽  
Negative Impact ◽  
Cast Steel ◽  
Continuous Casting Machine ◽  
Casting Machine ◽  
Chemical Compositions ◽  
Negative Effect ◽  
Type Size ◽  
Steel Cleanliness ◽  
Steel Grades

Modern steel plants produce today a large portfolio of various steel grades, many for end-uses demanding high quality. In order to utilize the maximum productivity of the continuous-casting machine, it is sometimes necessary to cast steel grades with different chemical compositions in one sequence. It is important, therefore, to know the possibilities of a specific continuous-casting machine to make the Intermix connections as short as possible. Any interference with established procedures may, however, have a negative impact on the cleanliness of the cast steel. Using physical and numerical simulation tools, it was found that reducing the steel level in the tundish during the exchange of ladles makes it possible to shorten the transition zone. However, when the steel level is reduced, the flow of steel is impaired, which can have a negative effect on the cleanliness of the cast steel and, in extreme cases, may even lead to entrapment of slag in the mold. The cleanliness of cast steel was evaluated using one of the most advanced tools for automatic steel cleanliness evaluation, AZtecFeature (Oxford Instruments, Abingdon, UK), which enables determination of the type, size, distribution, and shape, as well as the chemical composition, of individual types of non-metal inclusions.

Sign in / Sign up

Export Citation Format

Share Document