Analysis of Electromagnetic Environment Optimization Measures for UHV Transmission Lines

2018 ◽  
Author(s):  
Liqun Shang ◽  
Weiwei Zhu
Keyword(s):  
Transmission Lines ◽  
Electromagnetic Environment ◽  
Uhv Transmission Lines

New aspects of power grid facilities personnel workplaces electromagnetic environment

2020 ◽  
Vol 60 (9) ◽  
pp. 569-574
Author(s):  
Nina B. Rubtsova ◽  
Sergey Yu. Perov ◽  
Olga V. Belaya ◽  
Tatiana A. Konshina
Keyword(s):  
Transmission Lines ◽  
Power Transmission ◽  
Power Grid ◽  
Spectral Characteristics ◽  
Ground Level ◽  
Frequency Characteristics ◽  
Frequency Range ◽  
Electromagnetic Environment ◽  
Limit Values ◽  
Special Assessment

Introduction. Electromagnetic safety of power grid facilities staff requires the exclusion of electromagnetic fields (EMF) harmful effects. EMF is evaluated by 50 Hz electric and magnetic fields (EF and MF) values in the framework of working conditions special assessment, and very rarely the analysis of the electromagnetic environment (EME) is carried out in depth. The aim of the study - EME hygienic assessment of power grid EHV facilities personnel workplace with adequate 50 Hz EF and MF levels evaluation as well as the analysis of EF and MF in the frequency range from 5 Hz to 500 Hz amplitude-frequency characteristics. Materials and methods. 50 Hz EF and MF values assessment was carried out on open switchgears (S) of substations and within sanitary breaks of 500 and 750 kV overhead power transmission lines (OTL). Measurements along to OTL trasses was performed using matrix-based method. Measurements and analysis of EF and MF values in 5-500 Hz frequency range amplitude-frequency characteristics were performed in the territory of 500 and 750 kV S. Results. Power frequency 50 Hz measurements results at 500 and 750 kV S ground-level personnel workplaces showed the presence of an excess of permissible limit values by EF intensity and the absence of an excess by MF. The measured EF values within 500 and 750 kV OTL sanitary gaps require limiting the working time of linemen due to the excess of the hygienic norms for full work shift, while the MP levels were almost completely within the standard values for persons not occupationally connected with electrical installations maintenance. MF and EE frequency range from 50 Hz to 500 Hz spectral characteristics analysis showed that 3rd harmonic percentage does not exceed 2.5% for EF and 6% for MF of the main level, the level of the 5th harmonic does not exceed 1% for EF and 3.5% for MF, the level of the 7th harmonic does not exceed 0.2% for EF and 0.8% for MF. These data show despite its low levels the contribution of MF different harmonics in a possible adverse impact on humane than EF corresponding harmonics. Conclusions. There was the confirmation of the previously justified use of the "matrix" scheme for of EF and MF values measurement along OTL routes. The relevance of to EF and MF all frequency components expos ure assessing possible health risk in extremely high voltage S territories and under OTL, based on international recommendations due to the lack of sanitary regulations in the Russian Federation for >50 Hz-30 kHz EF and MF, is shown.

An Electroscope System Based on Electric Field Measurement Method for UHV Transmission Lines

2009 ◽  
Vol 10 (2) ◽  
Author(s):  
Fan Yang ◽  
Wei He ◽  
Tao Chen ◽  
Xiaochu Luo ◽  
Yongchang Fu
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Transmission Lines ◽  
Field Measurement ◽  
Measurement Method ◽  
Electric Field Measurement ◽  
Set Up ◽  
Global Regularization ◽  
Uhv Transmission Lines ◽  
Internet Network

The paper describes an electric field measurement method based electroscope system to check the electrification state of ultra-high voltage transmission lines, which is composed of three parts: 1) Measuring terminal; 2) Central sever; 3) GPRS and Internet network. The measuring terminal was used to measure the electric field and the location of the measuring points, then the measured data was sent to the central sever by GPRS and Internet network, and requested for an electricity state confirmation.When the sever received a request from a terminal, the electric fields and locations of the measuring points were obtained first, then according to the location of the measuring points, the server searches the corresponding objective transmission lines in the database and read their parameters. According to the parameters of the measuring points and transmission lines, a calculation would be carried out to confirm the electrification state of the transmission lines. For the confirmation calculation, equations for the electric field inverse problem of the transmission lines were set up first, then global regularization and damped Gauss Newton (DGN) method were used to solve the inverse problem.A 500kV double loops transmission line was taken as an example to verify the validity of this method. The electric field and location of 11 measuring points were measured by the measuring terminal firstly, and then sent to the central sever. Electrification state was confirmed by the central sever.

High Voltage Transmission Line Electromagnetic Environment Analysis and Research on the Human Body Biological Effect

2014 ◽  
Vol 602-605 ◽  
pp. 2637-2640
Author(s):  
Ao Wang ◽  
Yu Hui Zhu ◽  
Rui Guan ◽  
Zi Wei Chen ◽  
Lian Qing Zhao
Keyword(s):  
Electromagnetic Field ◽  
Field Strength ◽  
High Voltage ◽  
Transmission Lines ◽  
Biological Effect ◽  
Electromagnetic Environment ◽  
Environment Analysis ◽  
High Voltage Transmission Line ◽  
Electromagnetic Field Strength ◽  
Ac Transmission

The research on 1000kV UHV AC transmission lines is to analysis the electromagnetic field strength around these lines, as well as the electromagnetic energy people absorbed at different distances under the lines. What’s more, suggestions for a further study and standards to improve are provided in the paper.

Sign in / Sign up

Export Citation Format

Share Document