scholarly journals The Effect of Nanostructure Modification on the Silicate Binder on Its Binding Characteristics and Functional Properties

2014 ◽  
Vol 59 (3) ◽  
pp. 1033-1036 ◽  
Author(s):  
I. Izdebska-Szanda ◽  
A. Baliński ◽  
M. Angrecki ◽  
A. Palma
Keyword(s):  
Chemical Modification ◽  
Sodium Silicate ◽  
Functional Properties ◽  
Elevated Temperatures ◽  
Technological Properties ◽  
Ferrous Alloys ◽  
Silicate Binder ◽  
Binding Characteristics ◽  
The Impact

Abstract A method for the chemical modification of silicate binder (hydrated sodium silicate) affecting the distribution of its nanostructure elements was disclosed. The effect of silicate binder modification on the resulting technological properties of moulding sands, determined under standard conditions and at elevated temperatures in the range from 1000C to 9000C, was discussed. Modification of this type is done on inorganic binders in order to reduce their unfavourable functional properties. It is particularly important when moulding sands with the silicate binder are used for casting of low-melting alloys. Therefore special attention was paid to the impact that modification of inorganic binders may have on the knocking out properties of sands prepared with these binders, when they are used in the process of casting non-ferrous alloys.

scholarly journals Fermentation as a Tool to Revitalise Brewers’ Spent Grain and Elevate Techno-Functional Properties and Nutritional Value in High Fibre Bread

Foods ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1639
Author(s):  
Emma Neylon ◽  
Elke K. Arendt ◽  
Emanuele Zannini ◽  
Aylin W. Sahin
Keyword(s):  
Functional Properties ◽  
Nutritional Value ◽  
Bread Quality ◽  
Wheat Bread ◽  
Promising Tool ◽  
Additional Processing ◽  
Spent Grain ◽  
The Impact ◽  
Over Time

Recycling of by-products from the food industry has become a central part of research to help create a more sustainable future. Brewers’ spent grain is one of the main side-streams of the brewing industry, rich in protein and fibre. Its inclusion in bread, however, has been challenging and requires additional processing. Fermentation represents a promising tool to elevate ingredient functionality and improve bread quality. Wheat bread was fortified with spray-dried brewers’ spent grain (BSG) and fermented brewers’ spent grain (FBSG) at two addition levels to achieve “source of fibre” and “high in fibre” claims according to EU regulations. The impact of BSG and FBSG on bread dough, final bread quality and nutritional value was investigated and compared to baker’s flour (BF) and wholemeal flour (WMF) breads. The inclusion of BSG and FBSG resulted in a stronger and faster gluten development; reduced starch pasting capacity; and increased dough resistance/stiffness. However, fermentation improved bread characteristics resulting in increased specific volume, reduced crumb hardness and restricted microbial growth rate over time. Additionally, the inclusion of FBSG slowed the release in reducing sugars over time during in vitro starch digestion. Thus, fermentation of BSG can ameliorate bread techno-functional properties and improve nutritional quality of breads.

scholarly journals Fire Resistance Behaviour of Geopolymer Concrete:An Overview

Buildings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 82
Author(s):  
Salmabanu Luhar ◽  
Demetris Nicolaides ◽  
Ismail Luhar
Keyword(s):  
Compressive Strength ◽  
Thermal Resistance ◽  
Building Materials ◽  
Elevated Temperatures ◽  
Construction Materials ◽  
Flexural Behavior ◽  
Thermal Shrinkage ◽  
Physico Chemical ◽  
The Impact ◽  
Loss Of Strength

Even though, an innovative inorganic family of geopolymer concretes are eye-catching potential building materials, it is quite essential to comprehend the fire and thermal resistance of these structural materials at a very high temperature and also when experiencing fire with a view to make certain not only the safety and security of lives and properties but also to establish them as more sustainable edifice materials for future. The experimental and field observations of degree of cracking, spalling and loss of strength within the geopolymer concretes subsequent to exposure at elevated temperature and incidences of occurrences of disastrous fires extend an indication of their resistance against such severely catastrophic conditions. The impact of heat and fire on mechanical attributes viz., mechanical-compressive strength, flexural behavior, elastic modulus; durability—thermal shrinkage; chemical stability; the impact of thermal creep on compressive strength; and microstructure properties—XRD, FTIR, NMR, SEM as well as physico-chemical modifications of geopolymer composites subsequent to their exposures at elevated temperatures is reviewed in depth. The present scientific state-of-the-art review manuscript aimed to assess the fire and thermal resistance of geopolymer concrete along with its thermo-chemistry at a towering temperature in order to introduce this novel, most modern, user and eco-benign construction materials as potentially promising, sustainable, durable, thermal and fire-resistant building materials promoting their optimal and apposite applications for construction and infrastructure industries.

scholarly journals Thermodynamic Behavior of Fe-Mn and Fe-Mn-Ag Powder Mixtures during Selective Laser Melting

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 234
Author(s):  
Jakob Kraner ◽  
Jožef Medved ◽  
Matjaž Godec ◽  
Irena Paulin
Keyword(s):  
Selective Laser Melting ◽  
Manganese Oxides ◽  
Elevated Temperatures ◽  
Manganese Content ◽  
Chemical Compositions ◽  
Metal Powders ◽  
Laser Melting ◽  
Powder Mixtures ◽  
Ε Martensite ◽  
The Impact

Additive manufacturing is a form of powder metallurgy, which means the properties of the initial metal powders (chemical composition, powder morphology and size) impact the final properties of the resulting parts. A complete characterization, including thermodynamic effects and the behavior of the metal powders at elevated temperatures, is crucial when planning the manufacturing process. The analysis of the Fe-Mn and Fe-Mn-Ag powder mixtures, made from pure elemental powders, shows a high susceptibility to sintering in the temperature interval from 700 to 1000 °C. Here, numerous changes to the manganese oxides and the αMn to βMn transformation occurred. The problems of mechanically mixed powders, when using selective laser melting, were highlighted by the low flowability, which led to a less controllable process, an uncontrolled arrangement of the powder and a large percentage of burnt manganese. All this was determined from the altered chemical compositions of the produced parts. The impact of the increased manganese content on the decreased probability of the transformation from γ-austenite to ε-martensite was confirmed. The ε-martensite in the microstructure increased the hardness of the material, but at the same time, its magnetic properties reduce the usefulness for medical applications. However, the produced parts had comparable elongations to human bone.

scholarly journals R-BPMV-Mediated Resistance to Bean pod mottle virus in Phaseolus vulgaris L. Is Heat-Stable but Elevated Temperatures Boost Viral Infection in Susceptible Genotypes

Viruses ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1239
Author(s):  
Chouaïb Meziadi ◽  
Julie Lintz ◽  
Masoud Naderpour ◽  
Charlotte Gautier ◽  
Sophie Blanchet ◽  
...  
Keyword(s):  
Elevated Temperature ◽  
Phaseolus Vulgaris ◽  
Elevated Temperatures ◽  
Heat Waves ◽  
Dominant Gene ◽  
Atmospheric Temperature ◽  
Mottle Virus ◽  
Bean Pod Mottle Virus ◽  
Heat Stable ◽  
The Impact

In the context of climate change, elevated temperature is a major concern due to the impact on plant–pathogen interactions. Although atmospheric temperature is predicted to increase in the next century, heat waves during summer seasons have already become a current problem. Elevated temperatures strongly influence plant–virus interactions, the most drastic effect being a breakdown of plant viral resistance conferred by some major resistance genes. In this work, we focused on the R-BPMV gene, a major resistance gene against Bean pod mottle virus in Phaseolus vulgaris. We inoculated different BPMV constructs in order to study the behavior of the R-BPMV-mediated resistance at normal (20 °C) and elevated temperatures (constant 25, 30, and 35 °C). Our results show that R-BPMV mediates a temperature-dependent phenotype of resistance from hypersensitive reaction at 20 °C to chlorotic lesions at 35 °C in the resistant genotype BAT93. BPMV is detected in inoculated leaves but not in systemic ones, suggesting that the resistance remains heat-stable up to 35 °C. R-BPMV segregates as an incompletely dominant gene in an F2 population. We also investigated the impact of elevated temperature on BPMV infection in susceptible genotypes, and our results reveal that elevated temperatures boost BPMV infection both locally and systemically in susceptible genotypes.

scholarly journals Repeated social defeat exaggerates fibrin-rich clot formation in FeCl3-induced arterial thrombosis mouse model by enhancing NETs formation via modulation of neutrophil functional properties

2020 ◽  
Vol 41 (Supplement_2) ◽  
Author(s):  
T Sugimoto ◽  
H Yamada ◽  
H Kubota ◽  
D Miyawaki ◽  
M Saburi ◽  
...  
Keyword(s):  
Functional Properties ◽  
Arterial Thrombosis ◽  
Social Defeat ◽  
Arterial Injury ◽  
Physical Contact ◽  
Clot Formation ◽  
Positive Staining ◽  
Double Positive ◽  
The Impact

Abstract Background and objective Depression is an independent risk factor of cardiovascular disease (CVD). We have recently shown that repeated social defeat (RSD) precipitates depressive-like behaviors in apoE−/− mice and exaggerates atherosclerosis development by enhancing neutrophil extracellular traps (NETs) formation. Here, we investigated the impact of RSD on arterial thrombosis. Methods and results Eight-week-old male WT mice were exposed to RSD by housing with a larger CD-1 mouse in a shared home cage. They were subjected to vigorous physical contact daily for 10 consecutive days. Control mice were housed in the same gage without physical contact. After social interaction test to confirm depressive-like behaviors, defeated mice (19 of 31) and control mice (12 of 14) were underwent arterial injury at 10 wks of age. A filter paper saturated with 10% FeCl3 was applied on the adventitial surface of left carotid artery for 3 min and analyzed 3 hrs later. The volume of thrombi was comparable between the two groups. However, fibrinogen/fibrin-positive areas in immunofluorescent images significantly increased in defeated mice (27.8% vs. 48.8%, p<0.01). The number of Ly-6G-positive cells in thrombi was markedly higher in defeated mice (144/mm2 vs. 878/mm2, p<0.05). Further, Ly-6G-positive cells were almost accumulated at the inner surface of injured artery, which were co-localized with neutrophil elastase, Cit-H3, and CD41-positive staining. Treatment with DNase I completely diminished the exaggerated fibrin-rich clot formation in defeated mice to an extent similar to that in control mice (25.7% vs. 22.3%, p = ns), without affecting the volume of thrombi and accumulation of Ly-6G-positive cells. Given that platelet aggregations induced by ADP or collagen were comparable between the two groups, neutrophil functional properties primarily contribute to the exaggerated fibrin-rich clot formation in defeated mice. We then examined neutrophil subset and vulnerability to NETs formation. At 3 hrs after FeCl3 application, the numbers of immature neutrophils (Ly6Glo/+CXCR2-) were comparable between the two groups in both bone marrow (BM) and peripheral blood (PB). In contrast, the number of PB mature neutrophils (Ly6G+CXCR2+) was markedly higher in defeated mice than control mice (580±68 /μl vs. 1265±114, p<0.01). We next examined in vitro NETs formation upon PMA in BM mature neutrophils by FACS and nucleic acid staining. The percentage of double-positive cells (Cit-H3, MPO) was significantly higher in defeated mice (7.5% vs. 10.2%, p<0.05), as well as SYTOX green-positive cells expelling DNA fibers (8.1% vs. 11.8%, p<0.05). Conclusions Our findings demonstrate for the first time that repeated social defeat enhances fibrin-rich clot formation after arterial injury by enhancing NETs formation via modulation of neutrophil functional properties, suggesting that NETosis could be a new therapeutic target in depression-related CVD development. Funding Acknowledgement Type of funding source: None

Assessing the impact of exceptional inter-annual climatic variability on rates of net ecosystem carbon dioxide exchange at Clara bog.

2021 ◽  
Author(s):  
Matthew Saunders ◽  
Ruchita Ingle ◽  
Shane Regan
Keyword(s):  
Water Table ◽  
Elevated Temperatures ◽  
Ecosystem Respiration ◽  
Anthropogenic Activities ◽  
Climatic Variability ◽  
Growing Season ◽  
Carbon Dioxide Exchange ◽  
Mean Annual Temperature ◽  
Monitoring Networks ◽  
The Impact

<p>Peatland ecosystems are integral to the mitigation of climate change as they represent significant terrestrial carbon sinks. In Ireland, peatlands cover ~20% of the land area but hold up to 75% of the soil organic carbon stock however many of these ecosystems (~85% of the total area) have been degraded due to anthropogenic activities such as agriculture, forestry and extraction for horticulture or energy. Furthermore, the carbon stocks that remain in these systems are vulnerable to inter-annual variation in climate, such as changes in precipitation and temperature, which can alter the hydrological status of these systems leading to changes in key biogeochemical processes and carbon and greenhouse gas exchange.  During 2018 exceptional drought and heatwave conditions were reported across Northwestern Europe, where reductions in precipitation coupled with elevated temperatures were observed. Exceptional inter-annual climatic variability was also observed at Clara bog, a near natural raised bog in the Irish midlands when data from 2018 and 2019 were compared. Precipitation in 2018 was ~300 mm lower than 2019 while the average mean annual temperature was 0.5°C higher. The reduction in precipitation, particularly during the growing season in 2018, consistently lowered the water table where ~150 consecutive days where the water table was >5cm below the surface of the bog were observed at the central ecotope location. The differing hydrological conditions between years resulted in the study area, as determined by the flux footprint of the eddy covariance tower, acting as a net source of carbon of 53.5 g C m<sup>-2</sup> in 2018 and a net sink of 125.2 g C m<sup>-2</sup> in 2019. The differences in the carbon dynamics between years were primarily driven by enhanced ecosystem respiration (R<sub>eco</sub>) and lower rates of Gross Primary Productivity (GPP) in the drier year, where the maximum monthly ratio of GPP:R<sub>eco</sub> during the growing season was 0.96 g C m<sup>-2</sup> month in 2018 and 1.14 g C m<sup>-2</sup> month in 2019. This study highlights both the vulnerability and resilience of these ecosystems to exceptional inter-annual climatic variability and emphasises the need for long-term monitoring networks to enhance our understanding of the impacts of these events when they occur.</p>

scholarly journals Experiment on Foreign Object Damage of Gas Turbine-Grade Silicon Nitride Ceramic

1998 ◽  
Author(s):  
Hiro Yoshida ◽  
Takashi Nakashima ◽  
Makoto Yoshida ◽  
Yasushi Hara ◽  
Toru Shimamori
Keyword(s):  
Elevated Temperature ◽  
Silicon Nitride ◽  
Elevated Temperatures ◽  
Tensile Load ◽  
Strength Degradation ◽  
Spall Fracture ◽  
Silicon Nitride Ceramic ◽  
Impact Tests ◽  
The Impact ◽  
Bending Fracture

A new high quality turbine system using monolithic silicon-nitride ceramic is under development. In this study particle impact tests of the silicon-nitride have been tried at room and elevated temperatures with and without tensile load, which simulates centrifugal force of blade rotation. In the experiment 1 mm diameter particle is impacted at velocities up to 900 m s−1. In this paper, critical velocities for bending fracture and Hertzian cracks are examined. Moreover, strength degradation at elevated temperature and spall fracture of the blade are discussed. The main results are: 1) The bending fracture mode critical impact velocity for soft particles is higher than that for hard particles. 2)The impact parameter ϕ for initiation of Hertzian cracks ranges 1.08×10−5 – 1.56×10−5 for the materials tested. 3)Strength degradation at elevated temperature was clearly observed. 4) In the impact tests on blades spall fracture, which was caused by interaction of stress waves, appeared.

scholarly journals Development of Creep-Resistant, Alumina-Forming Ferrous Alloys for High-Temperature Structural Use

2018 ◽  
Author(s):  
Y. Yamamoto ◽  
M. P. Brady ◽  
G. Muralidharan ◽  
B. A. Pint ◽  
P. J. Maziasz ◽  
...  
Keyword(s):  
High Temperature ◽  
Elevated Temperatures ◽  
Extreme Environments ◽  
Alloy Design ◽  
Austenitic Steels ◽  
Strength Development ◽  
Second Phase ◽  
Ferrous Alloys ◽  
Steel Alloys ◽  
Structural Applications

This paper overviews recent advances in developing novel alloy design concepts of creep-resistant, alumina-forming Fe-base alloys, including both ferritic and austenitic steels, for high-temperature structural applications in fossil-fired power generation systems. Protective, external alumina-scales offer improved oxidation resistance compared to chromia-scales in steam-containing environments at elevated temperatures. Alloy design utilizes computational thermodynamic tools with compositional guidelines based on experimental results accumulated in the last decade, along with design and control of the second-phase precipitates to maximize high-temperature strengths. The alloys developed to date, including ferritic (Fe-Cr-Al-Nb-W base) and austenitic (Fe-Cr-Ni-Al-Nb base) alloys, successfully incorporated the balanced properties of steam/water vapor-oxidation and/or ash-corrosion resistance and improved creep strength. Development of cast alumina-forming austenitic (AFA) stainless steel alloys is also in progress with successful improvement of higher temperature capability targeting up to ∼1100°C. Current alloy design approach and developmental efforts with guidance of computational tools were found to be beneficial for further development of the new heat resistant steel alloys for various extreme environments.

scholarly journals Influence of layering pattern of modified kenaf fiber on thermomechanical properties of epoxy composites

2019 ◽  
Vol 36 (1) ◽  
pp. 47-62
Author(s):  
AR Mohammed ◽  
MS Nurul Atiqah ◽  
Deepu A Gopakumar ◽  
MR Fazita ◽  
Samsul Rizal ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Chemical Modification ◽  
Epoxy Matrix ◽  
Epoxy Composites ◽  
Woven Composites ◽  
Fiber Reinforced ◽  
Kenaf Fiber ◽  
Kenaf Fibers ◽  
The Impact ◽  
Woven Kenaf

Natural fiber-reinforced composites gained considerable interest in the scientific community due to their eco-friendly nature, cost-effective, and excellent mechanical properties. Here, we reported a chemical modification of kenaf fiber using propionic anhydride to enhance the compatibility with the epoxy matrix. The incorporation of the modified woven and nonwoven kenaf fibers into the epoxy matrix resulted in the improvement of the thermal and mechanical properties of the composite. The thermal stability of the epoxy composites was enhanced from 403°C to 677°C by incorporating modified woven kenaf fibers into the epoxy matrix. The modified and unmodified woven kenaf fiber-reinforced epoxy composites had a tensile strength of 64.11 and 58.82 MPa, respectively. The modified woven composites had highest flexural strength, which was 89.4 MPa, whereas, for unmodified composites, it was 86.8 MPa. The modified woven fiber-reinforced epoxy composites showed the highest value of flexural modulus, which was 6.0 GPa compared to unmodified woven composites (5.51 GPa). The impact strength of the epoxy composites was enhanced to 9.43 kJ m−2 by the incarnation of modified woven kenaf fibers into epoxy matrix. This study will be an effective platform to design the chemical modification strategy on natural fibers for enhancing the compatibility toward the hydrophobic polymer matrices.

scholarly journals Mechanical Performance Under Various Conditions of 3D Printed Polylactide Composites With Natural Fibers

2021 ◽  
Author(s):  
Karolina E. Mazur ◽  
Aleksandra Borucka ◽  
Paulina Kaczor ◽  
Szymon Gądek ◽  
Stanislaw Kuciel
Keyword(s):  
Elevated Temperatures ◽  
Mechanical Performance ◽  
Natural Fibers ◽  
Crystallization Rate ◽  
Mechanical Tests ◽  
Hydrothermal Degradation ◽  
3D Printed ◽  
The Impact ◽  
Different Levels ◽  
Additive Methods

Abstract In the study, polylactide-based (PLA) composites modified with natural particles (wood, bamboo, and cork) and with different levels of infilling (100%, 80%, and 60%) obtained by additive methods were tested. The effect of type fiber, infill level and crystallization rate on the mechanical properties were investigated by using tensile, flexural, and impact tests. The materials were subjected to mechanical tests carried out at 23 and 80 °C. Furthermore, hydrothermal degradation was performed, and its effect on the properties was analyzed. The addition of natural fillers and different level of infilling result in a similar level of reduction in the properties. Composites made of PLA are more sensitive to high temperature than to water. The decrease in Young's modulus of PLA at 80 °C was 90%, while after 28 days of hydrodegradation ~ 9%. The addition of fibers reduced this decrease at elevated temperatures. Moreover, the impact strength has been improved by 50% for composites with cork particles and for other lignocellulosic composites remained at the same level as for resin.

Sign in / Sign up

Export Citation Format

Share Document