scholarly journals Influence of Technological Parameters of Furane Mixtures on Shrinkage Creation in Ductile Cast Iron Castings

2014 ◽  
Vol 59 (3) ◽  
pp. 1037-1040 ◽  
Author(s):  
I. Vasková ◽  
M. Hrubovčáková ◽  
J. Malik ◽  
Š. Eperješi
Keyword(s):  
Cast Iron ◽  
Ductile Iron ◽  
Ductile Cast Iron ◽  
Gating System ◽  
Technological Parameters ◽  
Iron Castings ◽  
Steel Castings ◽  
The Impact ◽  
Very High ◽  
Great Development

Abstract Ductile cast iron (GS) has noticed great development in last decades and its boom has no analogue in history humankind. Ductile iron has broaden the use of castings from cast iron into areas, which where exclusively domains for steel castings. Mainly by castings, which weight is very high, is the propensity to shrinkage creation even higher. Shrinkage creation influences mainly material, construction of casting, gating system and mould. Therefore, the main realized experiment was to ascertain the influence of technological parameters of furane mixture on shrinkage creation in castings from ductile iron. Together was poured 12 testing items in 3 moulds forto determine and compare the impact of various technological parameters forms the propensity for shrinkage in the casting of LGG.

scholarly journals The Impact of Process Factors on Creating Defects, Mainly Lustrous Carbon, during the Production of Ductile Iron Using the Lost-Foam Casting (LFC) Method

Metals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1022
Author(s):  
Jan Jezierski ◽  
Michał Jureczko ◽  
Rafał Dojka
Keyword(s):  
Cast Iron ◽  
Ductile Iron ◽  
Surface Defects ◽  
Ductile Cast Iron ◽  
High Tech ◽  
Lost Foam Casting ◽  
Iron Castings ◽  
Process Factors ◽  
The Impact ◽  
Lost Foam

The purpose of this paper was to analyze the process factors affecting the occurrence of lustrous carbon defects in ductile cast iron castings when using the lost-foam casting (LFC) method. This phenomenon results in creating raw surface defects, which sometimes may even lead to cast iron scrapping. A series of trial melting batches were carried out for variable process assumptions. The analysis was performed to reflect, to the greatest extent possible, real foundry production conditions. Industrial tests were performed in Odlewnia Rafamet Sp. z o.o., Kuźnia Raciborska, Poland. The polystyrene patterns created by gluing components together, used in the tests, met the requirements of the high-tech lost-foam casting (LFC) process. The performed analysis allowed the obtaining of lustrous carbon defects in test castings as well as the determination of the process parameters with the highest impact on lustrous carbon inclusions in ductile iron castings. The test results were used to eliminate the possibility of creating a defect and thus directly improve the efficiency of the lost-foam casting (LFC) process used in the foundry.

Influence of Charge Composition on EN-GJS-500-7 Ductile Iron Properties in Foundry Operating Conditions

2020 ◽  
Vol 998 ◽  
pp. 42-47
Author(s):  
Alena Pribulová ◽  
Peter Futaš ◽  
Marcela Pokusova
Keyword(s):  
Mechanical Properties ◽  
Cast Iron ◽  
Ductile Iron ◽  
Ductile Cast Iron ◽  
Operating Conditions ◽  
Production Costs ◽  
Steel Scrap ◽  
Charge Composition ◽  
Iron Castings ◽  
Worldwide Production

Worldwide production of ductile iron castings reached in year 2017 26,428,148 metric tons, which is 34% of the total weight of all castings made from cast iron. The most significant increase in ductile iron castings was recorded in Slovakia, up to 78.6%. Castings from ductile iron have a very huge utilization thanks their very good foundry and mechanical properties. The current economic situation in all industries forces entrepreneurs and producers to rationalize production and reduce production costs, with a worldwide trend to increase the share of steel scrap, a technology for the production of ductile cast iron. The paper describes the results of research focused on the effect of charge composition, mainly the share of scrap steel on the final properties and structure of ductile iron EN-GJS-500-7 under the operating conditions of foundry. Six melts with different charge composition were made. The samples from all melts were taken and chemical analysis, microstructure analysis and testing on mechanical properties were made on them. The mechanical properties of produced globular cast irons were according with the relevant standard. It is important to mention that there has been a significant increase in strength characteristics in melts in which the carbon content exceeded 4% (CE = 4.7 and 4.8%, respectively).

The Influence of Boron on Structure and Mechanical Properties of Bainite Ductile Iron in the Step Austempering in Room Temperature Machine Oil

2010 ◽  
Vol 139-141 ◽  
pp. 235-238
Author(s):  
De Qiang Wei
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Cast Iron ◽  
Impact Strength ◽  
Ductile Iron ◽  
Room Temperature ◽  
Solute Drag ◽  
Ductile Cast Iron ◽  
Treatment Technique ◽  
The Impact

In this paper, the low alloy bainite ductile cast iron has been obtained by a new heat treatment technique of the step austempering in room-temperature machine oil. The effects of element boron, manganese and copper on structure and mechanical properties of the bainite ductile cast Iron in above-mentioned process are investigated. The phenomenon, hardness lag of the alloyed bainite ductile cast Iron, has been discussed. It shows that after the step austempering in room-temperature machine oil, the hardness will increases with the time. It is found that boron and manganese can increase the hardness and reduce the impact strength while copper can increase the impact strength. The results show that reasonable alloyed elements can improve mechanical properties of the bainite ductile cast Iron. Essentially, hardness lag of the alloyed bainite ductile cast Iron is resulted from solute drag-like effect.

scholarly journals Characteristics of ADI Ductile Cast Iron with Single Addition of 1.56% Ni

2017 ◽  
Vol 62 (4) ◽  
pp. 2273-2280
Author(s):  
B. Mrzygłód ◽  
A. Kowalski ◽  
I. Olejarczyk-Wożenska ◽  
T. Giętka ◽  
M. Głowacki
Keyword(s):  
Mechanical Properties ◽  
Cast Iron ◽  
Ductile Iron ◽  
Charpy Impact ◽  
Ductile Cast Iron ◽  
Microstructure And Mechanical Properties ◽  
Static Tensile ◽  
Single Addition ◽  
Charpy Impact Strength ◽  
The Impact

Abstract The results of examinations of microstructure and an analysis of its impact on selected mechanical properties of austempered ductile iron (ADI) were presented in the paper. The ADI was produced from the ductile iron containing 1.56% Ni only alloying addition. The effect of the austempering time and temperature on the microstructure and mechanical properties of the examined cast iron was considered. Constant conditions of austenitizing were assumed and six variants of the austempering treatment were adopted. The studyof mechanical properties included a static tensile test, Charpy impact strength test and Brinellhardness measurement. This work complements the knowledge about alloying additions effect on microstructure and mechanical properties of ADI and focuses on the impact of a single alloying element (Ni).

scholarly journals Primary Structure and Graphite Nodules in Thin-Walled High-Nickel Ductile Iron Castings

Metals ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 649
Author(s):  
Marcin Górny ◽  
Magdalena Kawalec ◽  
Gabriela Sikora ◽  
Ewa Olejnik ◽  
Hugo Lopez
Keyword(s):  
Cast Iron ◽  
Ductile Iron ◽  
Structural Features ◽  
Eutectic Solidification ◽  
Spheroidal Graphite ◽  
Quality Factors ◽  
Iron Castings ◽  
Spheroidal Graphite Cast Iron ◽  
Graphite Cast Iron ◽  
Thin Walled

This paper considers the most important quality factors in processing spheroidal graphite cast iron; namely, primary grains and graphite nodules in thin-walled ductile iron castings (TWDI). In the present study, the effect of grain refinement (by means of Ti, Nb and Zr) and of the holding time after spheroidization and inoculation on effecting the primary grains and eutectic structure in TWDI castings was investigated. Moreover, metallographic examinations (including electron backscattering diffraction, EBSD) were carried out to reveal the macro- and micro-structural features during the primary and eutectic solidification of the cast iron. EBSD results indicate that, within a single dendritic grain, there are numerous boundaries that split the grain into numerous smaller areas. In particular, it is found that the graphite nodules are in contact with the boundaries inside the primary dendritic grain. In turn, crystallization of highly branched dendrites is observed, which seems to “push” the graphite nodules into the interdendritic regions during their growth. The present work investigates the dominant mechanism that gives rise to the primary spheroidal graphite cast iron (SGI) structure. In addition, this work shows that the melt quality is closely associated with the resultant morphology and number of austenite dendrites, graphite nodules, and matrix structure.

scholarly journals The Influence of Different Assist Gases on Ductile Cast Iron Cutting by CO2 Laser

2017 ◽  
Vol 17 (4) ◽  
pp. 109-114 ◽  
Author(s):  
J. Meško ◽  
R. Nigrovič ◽  
A. Zrak
Keyword(s):  
Cast Iron ◽  
Laser Cutting ◽  
Roughness Parameter ◽  
Cutting Speed ◽  
Nodular Cast Iron ◽  
Ductile Cast Iron ◽  
Engineering Practice ◽  
Technological Parameters ◽  
The Stability

Abstract This article deals with the technology and principles of the laser cutting of ductile cast iron. The properties of the CO2 laser beam, input parameters of the laser cutting, assist gases, the interaction of cut material and the stability of cutting process are described. The commonly used material (nodular cast iron - share of about 25% of all castings on the market) and the method of the laser cutting of that material, including the technological parameters that influence the cutting edge, are characterized. Next, the application and use of this method in mechanical engineering practice is described, focusing on fixing and renovation of mechanical components such as removing the inflow gate from castings with the desired quality of the cut, without the further using of the chip machining technology. Experimental samples from the nodular cast iron were created by using different technological parameters of laser cutting. The heat affected zone (HAZ), its width, microstructure and roughness parameter Pt was monitored on the experimental samples (of thickness t = 13 mm). The technological parameters that were varied during the experiments included the type of assist gases (N2 and O2), to be more specific the ratio of gases, and the cutting speed, which ranged from 1.6 m/min to 0.32 m/min. Both parameters were changed until the desired properties were achieved.

scholarly journals Investigation of the Nodularisation Propensity of Calcined Cashew-Nut Shell-Ash in Cast-Iron Melt Graphite

2021 ◽  
Vol 18 (1) ◽  
pp. 1-8
Author(s):  
O.I. Sekunowo ◽  
J.O. Ugboaja ◽  
J.A. Tiamiyu
Keyword(s):  
Mechanical Properties ◽  
Cast Iron ◽  
Ductile Iron ◽  
Microstructural Analysis ◽  
Ductile Cast Iron ◽  
Cashew Nut ◽  
Melt Treatment ◽  
Master Alloys ◽  
Molten Cast Iron ◽  
Cashew Nut Shell

Production of ductile iron using ferrosilicon-magnesium master alloy in melt treatment is currently fraught with challenges bothering on cost and availability. In this study the suitability of cashew nut shells ash (CNSA) as a viable alternative to magnesium master alloys employed in the treatment of molten cast iron for enhanced mechanical properties was studied. The carbonized CNSA used varied from 2-10 wt. % to treat different heat batches; CA1-CA5 containing varied amount of CNSA, CaO and FeSi in the molten cast iron. The cast samples were subjected to both mechanical characterisation (tensile, hardness and impact) and microstructural analysis using Instron electromechanical machine, impact tester and scanning electron microscope (SEM) coupled with energy dispersive spectroscope (EDS). Results show that the 8 wt. % CNSA addition demonstrated the best mechanical properties comparable to ASTM A536 ferritic ductile cast iron. Specifically, the 8 wt. % CNSA cast samples exhibited 433 MPa tensile strength, 144HRC hardness and ductility of 14.7%. Contributions to improved mechanical properties may be attributed to the development of sufficient fractions of graphite nodules during melt treatment with CNSA. These outcomes are a boost both to the production of quality ductile irons and a cleaner environment. Keywords: Nodularisation, ductile-iron, cashew-nut, ferrosilicon-magnesium alloy, mechanical properties

scholarly journals Influence of nickel addition and casting modulus on the properties of hypo-eutectic ductile cast iron

2019 ◽  
Vol 55 (2) ◽  
pp. 283-293 ◽  
Author(s):  
E. Colin-García ◽  
A. Cruz-Ramírez ◽  
G. Reyes-Castellanos ◽  
J.A. Romero-Serrano ◽  
R.G. Sánchez-Alvarado ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Cast Iron ◽  
Cooling Rate ◽  
Ductile Iron ◽  
Ductile Cast Iron ◽  
Strength Ratio ◽  
Cast Irons ◽  
Microstructural Changes ◽  
Nodule Count ◽  
Nickel Addition

The effect of the casting modulus on the distribution and features of graphite in hypo-eutectic ductile iron unalloyed and alloyed with nickel (0.88 wt %) was studied. The cooling rate of the casting plates of 25.4, 12.7 and 8.5 mm in thickness with a casting modulus of 6.87, 4.46 and 3.31 mm, respectively promotes several microstructural changes, such as cementite precipitation and a noticeable nodule count increment. The nickel addition suppressed the cementite formation and improved the nodule count and nodularity for the three casting modulus evaluated. The nickel addition increased the nodule count in 69, 67 and 128 % for the modulus of 3.31, 4.46 and 6.87 mm, respectively, regarding the unalloyed ductile iron. It was found that the biggest casting modulus produced the biggest nodules with the lowest nodule count for both ductile cast irons. Further to the improvements in the graphite features, the nickel addition allowed to keep almost constant the yield and tensile strength ratio for the different casting modulus.

scholarly journals Improving the Mechanical Strength of Ductile Cast Iron Welded Joints Using Different Heat Treatments

Materials ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2263 ◽  
Author(s):  
Eva S.V. Marques ◽  
F.J.G. Silva ◽  
Olga C. Paiva ◽  
António B. Pereira
Keyword(s):  
Cast Iron ◽  
Mechanical Strength ◽  
Welded Joints ◽  
Arc Welding ◽  
Heat Treatments ◽  
Ductile Cast Iron ◽  
Parent Material ◽  
Additional Energy ◽  
Very High ◽  
Weld Heat

The main advantage of welding cast iron is to recover parts by repairing defects induced by casting processes (porosities, etc.), before they enter their working cycle, as well as repair cracks or fractures when already in service. This method contributes to decreased foundry industrial waste and avoids the additional energy costs of their immediate recycling. Therefore, it is necessary to have a welded joint with similar or better characteristics than the parent material. The major problem of welding cast iron is that this material has a very high content of carbon in comparison to steel (≈3%). Therefore, when it is heated by the very high temperatures from arc welding and during its process of solidification, very hard and brittle phases originate, known as ledeburite and martensite, and appear in the partially melted zone and in the heat-affected zone. Eventually, this problem can be solved by implementing heat treatments such as preheat or post weld heat treatments under specific parameters. Therefore, in this study, the aim is to collect data about the effects of heat treatments performed at different temperatures on welded joints of high strength ductile cast iron (SiboDur® 450), and to evaluate the effects of heat treatments performed at diverse temperatures on welded joints of this type of material, using Shield Metal Arc Welding and nickel electrodes. Mechanical strength, hardness, and microstructure were analyzed, showing that the best mechanical strength in the joint (380 MPa) was obtained using two passes of E C Ni-Cl (ISO EN 1071:2015) filler metal and post weld heat treatments (PWHT) of 400 °C for two hours.

scholarly journals Thin Wall Ductile Iron Castings as Substitutes for Aluminium Alloy Castings

2014 ◽  
Vol 59 (2) ◽  
pp. 459-465 ◽  
Author(s):  
E. Fraś ◽  
M. Górny ◽  
H. Lopez
Keyword(s):  
Cast Iron ◽  
Ductile Iron ◽  
Weight Ratio ◽  
Salt Bath ◽  
Thin Wall ◽  
Ratio Increase ◽  
Current Trends ◽  
Iron Castings ◽  
Superior Mechanical Properties ◽  
Alloy Castings

Abstract The paper discusses the reasons behind current trends for substituting cast iron castings by aluminum alloys. In particular it is shown that it is possible to produce thin wall castings (control arms, cantilevers and rotors) made of ductile iron without the development of chills, cold laps or misruns, and with a strength to weight ratio of up 87 MPa cm3/g. In addition, austenitizing at 900 °C for 20 minutes and then austempering in a salt bath at 350 °C for 15 minutes promotes the development of a fully ausferritic matrix in thin wall castings with a the strength to weight ratio increase of up to 154 MPa cm3/g. Finally, it is shown that thin wall castings made of ductile or austemperded cast iron can be lighter and with superior mechanical properties then their substitutes made of aluminum alloy.

Sign in / Sign up

Export Citation Format

Share Document