scholarly journals The Changing Legislation and Regulation of Carbon Capture and Storage: Impacts on Purpose, Policy, and Projects

2011 ◽  
Vol 49 (2) ◽  
pp. 305
Author(s):  
Michael G Massicotte ◽  
Alan L Ross ◽  
Chidinma B Thompson
Keyword(s):  
Carbon Dioxide ◽  
Carbon Dioxide Emissions ◽  
Carbon Capture ◽  
Carbon Capture And Storage ◽  
The Government ◽  
Reduce Carbon Dioxide ◽  
The Impact ◽  
And Storage

The Government of Alberta is implementing carbon capture and storage (CCS) technology in order to reduce carbon dioxide emissions. With the enactment of the Carbon Capture and Storage Statutes Amendment Act, 2010 in November 2010, Alberta became the first jurisdiction in Canada to have comprehensive CCS legislation. This article describes CCS technology, considers the impact of the new legislation and potential interjurisdictional conflicts, and briefly compares the CCS legislation of other jurisdictions with Alberta’s legislation.

Technical and Economic Aspects of Carbon Capture an Storage — A Review

2007 ◽  
Vol 25 (5) ◽  
pp. 357-392 ◽  
Author(s):  
Havva Balat ◽  
Cahide Öz
Keyword(s):  
Carbon Dioxide ◽  
Carbon Dioxide Emissions ◽  
Carbon Capture ◽  
Fossil Fuels ◽  
Carbon Capture And Storage ◽  
The United States ◽  
Potential Contribution ◽  
Economic Aspects ◽  
Ccs Technologies ◽  
And Storage

This article deals with review of technical and economic aspects of Carbon Capture and Storage. Since the late 1980s a new concept is being developed which enables to make use of fossil fuels with a considerably reduced emission of carbon dioxide to the atmosphere. The concept is often called ‘Carbon Capture and Storage’ (CCS). CCS technologies are receiving increasing attention, mainly for their potential contribution to the optimal mitigation of carbon dioxide emissions that is intended to avoid future, dangerous climate change. CCS technologies attract a lot of attention because they could allow “to reduce our carbon dioxide emissions to the atmosphere whilst continuing to use fossil fuels”. CCS is not a completely new technology, e.g., the United States alone is sequestering about 8.5 MtC for enhanced oil recovery each year. Today, CCS technologies are widely recognised as an important means of progress in industrialized countries.

A review on materials and processes for carbon dioxide separation and capture

2021 ◽  
pp. 0958305X2110509
Author(s):  
R Maniarasu ◽  
Sushil Kumar Rathore ◽  
S. Murugan
Keyword(s):  
Carbon Dioxide ◽  
Global Warming ◽  
Global Warming Potential ◽  
Carbon Dioxide Emissions ◽  
Carbon Capture ◽  
Carbon Capture And Storage ◽  
Point Sources ◽  
Continuous Increase ◽  
Physical And Chemical ◽  
And Storage

In today’s world, owing to industrial expansion, urbanization, the rapid growth of the human population, and the high standard of living, the utilization of the most advanced technologies is unavoidable. The enhanced anthropogenic activities worldwide result in a continuous increase in global warming potential, thereby raising a global concern. The constant rise in global warming potential forces the world to mitigate greenhouse gases, particularly carbon dioxide. Carbon dioxide is considered as the primary contributor responsible for global warming and climatic changes. The global anthropogenic carbon dioxide emissions released into the atmosphere can eventually deteriorate the environment and endanger the ecosystem. Combating global warming is one of the main challenges in achieving sustainable development. Carbon capture and storage is a potential solution to mitigate carbon dioxide emissions. There are three main methods for carbon capture and storage: post-combustion, pre-combustion, and oxy-fuel combustion. Among them, post-combustion is used in thermal power plants and industrial sectors, all of which contribute a significant amount of carbon dioxide. Different techniques such as physical and chemical absorption, physical and chemical adsorption, membrane separation, and cryogenic distillation used for carbon capture are thoroughly discussed and presented. Currently, there are various materials including absorbents, adsorbents, and membranes used in carbon dioxide capture. Still, there is a search for new and novel materials and processes for separating and capturing carbon dioxide. This review article provides a comprehensive review of different methods, techniques, materials, and processes used for separating and capturing carbon dioxide from significant stationary point sources.

Transporting the Next Generation of CO2 for Carbon, Capture and Storage: The Impact of Impurities on Supercritical CO2 Pipelines

2008 ◽  
Author(s):  
Patricia N. Seevam ◽  
Julia M. Race ◽  
Martin J. Downie ◽  
Phil Hopkins
Keyword(s):  
Carbon Dioxide ◽  
Carbon Capture ◽  
Power Plants ◽  
Fossil Fuel ◽  
Carbon Capture And Storage ◽  
Transport Infrastructure ◽  
New Generation ◽  
The Impact ◽  
And Storage ◽  
Fossil Fuel Power Plants

Climate change has been attributed to greenhouse gases with carbon dioxide (CO2) being the major contributor. Most of these CO2 emissions originate from the burning of fossil fuels (e.g. power plants). Governments and industry worldwide are now proposing to capture CO2 from their power plants and either store it in depleted reservoirs or saline aquifers (‘Carbon Capture and Storage’, CCS), or use it for ‘Enhanced Oil Recovery’ (EOR) in depleting oil and gas fields. The capture of this anthropogenic (man made sources of CO2) CO2 will mitigate global warming, and possibly reduce the impact of climate change. The United States has over 30 years experience with the transportation of carbon dioxide by pipeline, mainly from naturally occurring, relatively pure CO2 sources for onshore EOR. CCS projects differ significantly from this past experience as they will be focusing on anthropogenic sources from major polluters such as fossil fuel power plants, and the necessary CO2 transport infrastructure will involve both long distance onshore and offshore pipelines. Also, the fossil fuel power plants will produce CO2 with varying combinations of impurities depending on the capture technology used. CO2 pipelines have never been designed for these differing conditions; therefore, CCS will introduce a new generation of CO2 for transport. Application of current design procedures to the new generation pipelines is likely to yield an over-designed pipeline facility, with excessive investment and operating cost. In particular, the presence of impurities has a significant impact on the physical properties of the transported CO2 which affects: pipeline design; compressor/pump power; repressurisation distance; pipeline capacity. These impurities could also have implications in the fracture control of the pipeline. All these effects have direct implications for both the technical and economic feasibility of developing a carbon dioxide transport infrastructure onshore and offshore. This paper compares and contrasts the current experience of transporting CO2 onshore with the proposed transport onshore and offshore for CCS. It covers studies on the effect of physical and transport properties (hydraulics) on key technical aspects of pipeline transportation, and the implications for designing and operating a pipeline for CO2 containing impurities. The studies reported in the paper have significant implications for future CO2 transportation, and highlight a number of knowledge gaps that will have to be filled to allow for the efficient and economic design of pipelines for this ‘next’ generation of anthropogenic CO2.

scholarly journals Interactions between reducing CO 2 emissions, CO 2 removal and solar radiation management

2012 ◽  
Vol 370 (1974) ◽  
pp. 4343-4364 ◽  
Author(s):  
Naomi E. Vaughan ◽  
Timothy M. Lenton
Keyword(s):  
Carbon Dioxide ◽  
Solar Radiation ◽  
Carbon Dioxide Emissions ◽  
Radiative Forcing ◽  
Carbon Capture ◽  
Climate Model ◽  
Carbon Capture And Storage ◽  
Solar Radiation Management ◽  
Radiation Management ◽  
And Storage

We use a simple carbon cycle–climate model to investigate the interactions between a selection of idealized scenarios of mitigated carbon dioxide emissions, carbon dioxide removal (CDR) and solar radiation management (SRM). Two CO 2 emissions trajectories differ by a 15-year delay in the start of mitigation activity. SRM is modelled as a reduction in incoming solar radiation that fully compensates the radiative forcing due to changes in atmospheric CO 2 concentration. Two CDR scenarios remove 300 PgC by afforestation (added to vegetation and soil) or 1000 PgC by bioenergy with carbon capture and storage (removed from system). Our results show that delaying the start of mitigation activity could be very costly in terms of the CDR activity needed later to limit atmospheric CO 2 concentration (and corresponding global warming) to a given level. Avoiding a 15-year delay in the start of mitigation activity is more effective at reducing atmospheric CO 2 concentrations than all but the maximum type of CDR interventions. The effects of applying SRM and CDR together are additive, and this shows most clearly for atmospheric CO 2 concentration. SRM causes a significant reduction in atmospheric CO 2 concentration due to increased carbon storage by the terrestrial biosphere, especially soils. However, SRM has to be maintained for many centuries to avoid rapid increases in temperature and corresponding increases in atmospheric CO 2 concentration due to loss of carbon from the land.

scholarly journals Circular Carbon Economy (CCE): A Way to Invest CO2 and Protect the Environment, a Review

2021 ◽  
Vol 13 (21) ◽  
pp. 11625
Author(s):  
Latifah M. Alsarhan ◽  
Alhanouf S. Alayyar ◽  
Naif B. Alqahtani ◽  
Nezar H. Khdary
Keyword(s):  
Carbon Dioxide ◽  
Carbon Dioxide Emissions ◽  
Carbon Capture ◽  
Carbon Capture And Storage ◽  
Monitoring Network ◽  
Field Measurements ◽  
Power Stations ◽  
Actual Field ◽  
And Storage ◽  
Carbon Economy

Increased levels of carbon dioxide have revolutionised the Earth; higher temperatures, melting icecaps, and flooding are now more prevalent. Fortunately, renewable energy mitigates this problem by making up 20% of human energy needs. However, from a “green environment” perspective, can carbon dioxide emissions in the atmosphere be reduced and eliminated? The carbon economic circle is an ideal solution to this problem, as it enables us to store, use, and remove carbon dioxide. This research introduces the circular carbon economy (CCE) and addresses its economic importance. Additionally, the paper discusses carbon capture and storage (CCS), and the utilisation of CO2. Furthermore, it explains current technologies and their future applications on environmental impact, CO2 capture, utilisation, and storage (CCUS). Various opinions on the best way to achieve zero carbon emissions and on CO2 applications and their economic impact are also discussed. The circular carbon economy can be achieved through a highly transparent global administration that is supportive of advanced technologies that contribute to the efficient utilisation of energy sources. This global administration must also provide facilities to modernise and develop factories and power stations, based on emission-reducing technologies. Monitoring emissions in countries through a global monitoring network system, based on actual field measurements, linked to a worldwide database allows all stakeholders to track the change in greenhouse gas emissions. The process of sequestering carbon dioxide in the ocean is affected by the support for technologies and industries that adopt the principle of carbon recycling in order to maintain the balance. This includes supporting initiatives that contribute to increasing vegetation cover and preserving oceans from pollutants, especially chemicals and radioactive pollutants, which will undoubtedly affect the process of sequestering carbon dioxide in the oceans, and this will contribute significantly to maintaining carbon dioxide at acceptable levels.

scholarly journals Review of Cryogenic Carbon Capture Innovations and Their Potential Applications

2021 ◽  
Vol 7 (3) ◽  
pp. 58
Author(s):  
Carolina Font-Palma ◽  
David Cann ◽  
Chinonyelum Udemu
Keyword(s):  
Carbon Dioxide Emissions ◽  
Carbon Capture ◽  
Large Scale ◽  
Carbon Capture And Storage ◽  
Technological Readiness ◽  
Cryogenic Carbon Capture ◽  
Potential Applications ◽  
Air Capture ◽  
Reduce Carbon Dioxide ◽  
Co2 Recovery

Our ever-increasing interest in economic growth is leading the way to the decline of natural resources, the detriment of air quality, and is fostering climate change. One potential solution to reduce carbon dioxide emissions from industrial emitters is the exploitation of carbon capture and storage (CCS). Among the various CO2 separation technologies, cryogenic carbon capture (CCC) could emerge by offering high CO2 recovery rates and purity levels. This review covers the different CCC methods that are being developed, their benefits, and the current challenges deterring their commercialisation. It also offers an appraisal for selected feasible small- and large-scale CCC applications, including blue hydrogen production and direct air capture. This work considers their technological readiness for CCC deployment and acknowledges competing technologies and ends by providing some insights into future directions related to the R&D for CCC systems.

Study on Dispersion of Carbon Dioxide over the Shrubbery Region

2021 ◽  
Vol 9 ◽  
Author(s):  
Wang Huiru ◽  
You Zhanping ◽  
Mo Fan ◽  
Liu Bin ◽  
Han Peng
Keyword(s):  
Carbon Dioxide ◽  
Carbon Capture ◽  
Carbon Capture And Storage ◽  
Dispersion Pattern ◽  
Buried Pipeline ◽  
Dynamic Impact ◽  
Coverage Area ◽  
Computational Fluid Dynamics Cfd ◽  
And Storage ◽  
Terrain Features

In the carbon capture and storage (CCS) infrastructure, the risk of a high-pressure buried pipeline rupture possibly leads to catastrophic accidents due to the release of tremendous amounts of carbon dioxide (CO2). Therefore, a comprehensive understanding of the effects of CO2 dispersion pattern after release from CCS facilities is essential to allow the appropriate safety precautions to be taken. Due to variations in topography above the pipeline, the pattern of CO2 dispersion tends to be affected by the real terrain features, such as trees and hills. However, in most previous studies, the dynamic impact of trees on the wind field was often approximated to linear treatment or even ignored. In this article, a computational fluid dynamics (CFD) model was proposed to predict CO2 dispersion over shrubbery areas. The shrubs were regarded as a kind of porous media, and the model was validated against the results from experiment. It was found that shrubbery affected the flow field near the ground, enhancing the lateral dispersion of CO2. Compared with that of the shrub-free terrain, the coverage area of the three shrub terrains at 60 s increased by 8.1 times, 6.7 times, and 9.1 times, respectively. The influence of shrub height and porosity on CO2 dispersion is nonlinear. This research provides reliable data for the risk assessment of CCS.

Densities of the carbon dioxide+hydrogen, a system of relevance to carbon capture and storage

2013 ◽  
Vol 13 ◽  
pp. 78-86 ◽  
Author(s):  
Yolanda Sanchez-Vicente ◽  
Trevor C. Drage ◽  
Martyn Poliakoff ◽  
Jie Ke ◽  
Michael W. George
Keyword(s):  
Carbon Dioxide ◽  
Carbon Capture ◽  
Carbon Capture And Storage ◽  
And Storage
Sign in / Sign up

Export Citation Format

Share Document