scholarly journals EVALUATION OF CDC LIGHT TRAP, BG SENTINEL TRAP, AND MMX TRAP FOR THE COLLECTION OF SALT MARSH MOSQUITOES IN ANASTASIA STATE PARK, SAINT AUGUSTINE, FLORIDA

2021 ◽  
Vol 66 (1) ◽  
pp. 64-67
Author(s):  
Daniel Dixon
Keyword(s):  
Salt Marsh ◽  
Light Trap ◽  
Storm Events ◽  
High Quality ◽  
Cdc Light Trap ◽  
Geometry Model ◽  
Significant Difference ◽  
Flow Geometry ◽  
Aedes Taeniorhynchus ◽  
Bg Sentinel

Salt marsh mosquitoes are major nuisance pests during the periods of high mosquito activity, especially after major storm events. In 2016-2017, Saint John’s County, Florida, USA was struck by two major hurricanes that resulted in multiple outbreaks of salt marsh mosquito populations. To optimize the surveillance of two salt marsh mosquitoes, (Aedes taeniorhynchus and Ae. sollicitans, three types of traps (the Centers for Disease Control (CDC) Light trap, Biogents Sentinel (BG) trap and Counter Flow Geometry Model (MMX) trap were tested for their capacity to capture the highest numbers of high quality live specimens for laboratory bioassays. Each trap type was tested in Anastasia State Park, located along a major salt marsh area in Saint John’s County. Although the MMX trap captured most of the salt marsh mosquitoes collected, the numbers of mosquitoes captured was not statistically significant compared to the other trap types. However, there was a significant difference in the numbers between Ae. taeniorhynchus and Ae. sollicitans in the MMX traps. The MMX trap is preferred for capturing salt marsh mosquitoes that are in high quality for the CDC bottle bioassays.

scholarly journals Evaluation of Mosquito Magnet and other collection tools for Anopheles mosquito vectors of simian malaria

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Nantha Kumar Jeyaprakasam ◽  
Sandthya Pramasivan ◽  
Jonathan Wee Kent Liew ◽  
Lun Van Low ◽  
Wan-Yusoff Wan-Sulaiman ◽  
...  
Keyword(s):  
Light Trap ◽  
Latin Square ◽  
Human Landing Catch ◽  
Mosquito Vectors ◽  
Cdc Light Trap ◽  
Simian Malaria ◽  
Significant Difference ◽  
Trapping Methods ◽  
Designed Experiment ◽  
The Mean

Abstract Background Vector surveillance is essential in determining the geographical distribution of mosquito vectors and understanding the dynamics of malaria transmission. With the elimination of human malaria cases, knowlesi malaria cases in humans are increasing in Malaysia. This necessitates intensive vector studies using safer trapping methods which are both field efficient and able to attract the local vector populations. Thus, this study evaluated the potential of Mosquito Magnet as a collection tool for Anopheles mosquito vectors of simian malaria along with other known collection methods. Methods A randomized 4 × 4 Latin square designed experiment was conducted to compare the efficiency of the Mosquito Magnet against three other common trapping methods: human landing catch (HLC), CDC light trap and human baited trap (HBT). The experiment was conducted over six replicates where sampling within each replicate was carried out for 4 consecutive nights. An additional 4 nights of sampling was used to further evaluate the Mosquito Magnet against the “gold standard” HLC. The abundance of Anopheles sampled by different methods was compared and evaluated with focus on the Anopheles from the Leucosphyrus group, the vectors of knowlesi malaria. Results The Latin square designed experiment showed HLC caught the greatest number of Anopheles mosquitoes (n = 321) compared to the HBT (n = 87), Mosquito Magnet (n = 58) and CDC light trap (n = 13). The GLMM analysis showed that the HLC method caught significantly more Anopheles mosquitoes compared to Mosquito Magnet (P = 0.049). However, there was no significant difference in mean nightly catch of Anopheles mosquitoes between Mosquito Magnet and the other two trapping methods, HBT (P = 0.646) and CDC light traps (P = 0.197). The mean nightly catch for both An. introlatus (9.33 ± 4.341) and An. cracens (4.00 ± 2.273) caught using HLC was higher than that of Mosquito Magnet, though the differences were not statistically significant (P > 0.05). This is in contrast to the mean nightly catch of An. sinensis (15.75 ± 5.640) and An. maculatus (15.78 ± 3.479) where HLC showed significantly more mosquito catches compared to Mosquito Magnet (P < 0.05). Conclusions Mosquito Magnet has a promising ability to catch An. introlatus and An. cracens, the important vectors of knowlesi and other simian malarias in Peninsular Malaysia. The ability of Mosquito Magnet to catch some of the Anopheles mosquito species is comparable to HLC and makes it an ethical and safer alternative. Graphic Abstract

scholarly journals Effect of the CDC light trap on control of nocturnal mosquitoes in coastal Samut Songkhram Province, Thailand

2018 ◽  
Vol 19 (5) ◽  
pp. 1750-1754 ◽  
Author(s):  
TANAWAT CHAIPHONGPACHARA ◽  
SEDTHAPONG LAOJUN ◽  
CHAEKKI KUNPHICHAYADECHA
Keyword(s):  
Mosquito Control ◽  
Light Trap ◽  
Coastal Areas ◽  
Effective Control ◽  
Weather Factors ◽  
Cdc Light Trap ◽  
Significant Difference ◽  
Set Up ◽  
The Relationship ◽  
Filariasis Vector

Chaiphongpachara T, Laojun S, Kunphichayadecha C. 2018. Effect of the CDC light trap on control of nocturnal mosquitoesin coastal Samut Songkhram Province, Thailand. Biodiversitas 19: 1750-1754. This study aimed to investigate the effect of CDC lighttrap on mosquito control and to study the relationship between this effect and weather factors in coastal areas (2 and 4 km from the sea)of Samut Songkhram Province, Thailand. We conducted a field test by trapping for 30 consecutive days from September to October2017. The trap was hung at a height of 1.5 m and was 50 m away from a house. A total of 2963 adult female mosquitoes of 4 speciesbelonging to 2 genera were trapped, including Anopheles epiroticus Linton & Harbach, Culex quinquefasciatus Say, Cx. sitiensWiedmann and Cx. gelidus Theobald. The trapping rate of the CDC light trap set up 2 km from the sea was 85.70±73.81 adultmosquitoes per night. Meanwhile, at the location 4 km from the sea, the trap collected 13.07±11.40 adult mosquitoes per night.Comparing the numbers of mosquitoes captured by the CDC light trap between these two sites, there was a significant difference at p <0.05. This study shows that the CDC light trap can be used for effective control of mosquitoes in coastal areas of Samut SongkhramProvince, Thailand, especially Cx. sitiens, a filariasis vector.

scholarly journals Levels of Evidence in Rhinology and Skull Base Surgery Research

2021 ◽  
pp. 019459982098713
Author(s):  
Jennifer A. Silver ◽  
Marco Mascarella ◽  
George Tali ◽  
Rickul Varshney ◽  
Marc A. Tewfik ◽  
...  
Keyword(s):  
Skull Base ◽  
Skull Base Surgery ◽  
Absolute Number ◽  
High Quality ◽  
Level Of Evidence ◽  
Levels Of Evidence ◽  
The Past ◽  
Significant Difference ◽  
Surgery Research ◽  
Based Medicine

Objective The purpose of this study was to evaluate the quality of evidence of rhinology and rhinologic skull base surgery (RSBS) research and its evolution over the past decade. Study Design Review article. Setting We reviewed articles from 2007 to 2019 in 4 leading peer-reviewed otolaryngology journals and 3 rhinology-specific journals. Methods The articles were reviewed and levels of evidence were assigned using the Oxford Centre for Evidence-Based Medicine 2011 guidelines. High quality was defined as level of evidence 1 or 2. Results In total, 1835 articles were reviewed in this study spanning a 13-year period. Overall, the absolute number of RSBS publications increased significantly 22.6% per year, from 108 articles in 2007 to 481 in 2019 ( P < .001; 95% CI, 7.9-37.2). In 2007, only 13 articles, or 15%, were high quality, and this grew to 146 articles, or 39%, in 2019. A 14.0% per year exponential increase in the number of high-quality publications was found to be statistically significant ( P < .001; 95% CI, 7.2, 20.7). Overall, high-quality publications represented just 25.8% of RSBS articles overall. There was no significant difference in quality between rhinology-specific journals and general otolaryngology journals (χ2 = 3.1, P = .077). Conclusion The number of overall publications and of high-quality RSBS publications has significantly increased over the past decade. However, the proportion of high-quality studies continues to represent a minority of total RSBS research.

scholarly journals Multi-Cycle-Consistent Adversarial Networks for Edge Denoising of Computed Tomography Images

2021 ◽  
Vol 17 (4) ◽  
pp. 1-16
Author(s):  
Xiaowe Xu ◽  
Jiawei Zhang ◽  
Jinglan Liu ◽  
Yukun Ding ◽  
Tianchen Wang ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Image Denoising ◽  
Ct Images ◽  
High Dose ◽  
Ct Image ◽  
Paired Data ◽  
High Quality ◽  
Computed Tomography Images ◽  
Significant Difference ◽  
Global Cycle

As one of the most commonly ordered imaging tests, the computed tomography (CT) scan comes with inevitable radiation exposure that increases cancer risk to patients. However, CT image quality is directly related to radiation dose, and thus it is desirable to obtain high-quality CT images with as little dose as possible. CT image denoising tries to obtain high-dose-like high-quality CT images (domain Y ) from low dose low-quality CT images (domain X ), which can be treated as an image-to-image translation task where the goal is to learn the transform between a source domain X (noisy images) and a target domain Y (clean images). Recently, the cycle-consistent adversarial denoising network (CCADN) has achieved state-of-the-art results by enforcing cycle-consistent loss without the need of paired training data, since the paired data is hard to collect due to patients’ interests and cardiac motion. However, out of concerns on patients’ privacy and data security, protocols typically require clinics to perform medical image processing tasks including CT image denoising locally (i.e., edge denoising). Therefore, the network models need to achieve high performance under various computation resource constraints including memory and performance. Our detailed analysis of CCADN raises a number of interesting questions that point to potential ways to further improve its performance using the same or even fewer computation resources. For example, if the noise is large leading to a significant difference between domain X and domain Y , can we bridge X and Y with a intermediate domain Z such that both the denoising process between X and Z and that between Z and Y are easier to learn? As such intermediate domains lead to multiple cycles, how do we best enforce cycle- consistency? Driven by these questions, we propose a multi-cycle-consistent adversarial network (MCCAN) that builds intermediate domains and enforces both local and global cycle-consistency for edge denoising of CT images. The global cycle-consistency couples all generators together to model the whole denoising process, whereas the local cycle-consistency imposes effective supervision on the process between adjacent domains. Experiments show that both local and global cycle-consistency are important for the success of MCCAN, which outperforms CCADN in terms of denoising quality with slightly less computation resource consumption.

scholarly journals Fate of hydrocarbon pollutants in source and non-source control sustainable drainage systems

2013 ◽  
Vol 69 (4) ◽  
pp. 703-709 ◽  
Author(s):  
Georgios Roinas ◽  
Cath Mant ◽  
John B. Williams
Keyword(s):  
Organic Pollutants ◽  
Chemical Properties ◽  
Pollutant Removal ◽  
Total Petroleum Hydrocarbons ◽  
Source Control ◽  
Storm Events ◽  
Pollutant Loads ◽  
Significant Difference ◽  
Local Roads ◽  
Polycyclic Aromatic

Sustainable drainage (SuDs) is an established method for managing runoff from developments, and source control is part of accepted design philosophy. However, there are limited studies into the contribution source control makes to pollutant removal, especially for roads. This study examines organic pollutants, total petroleum hydrocarbons (TPH) and polycyclic aromatic hydrocarbons (PAHs), in paired source and non-source control full-scale SuDs systems. Sites were selected to cover local roads, trunk roads and housing developments, with a range of SuDs, including porous asphalt, swales, detention basins and ponds. Soil and water samples were taken bi-monthly over 12 months to assess pollutant loads. Results show first flush patterns in storm events for solids, but not for TPH. The patterns of removal for specific PAHs were also different, reflecting varying physico-chemical properties. The potential of trunk roads for pollution was illustrated by peak runoff for TPH of &gt; 17,000 μg/l. Overall there was no significant difference between pollutant loads from source and non-source control systems, but the dynamic nature of runoff means that longer-term data are required. The outcomes of this project will increase understanding of organic pollutants behaviour in SuDs. This will provide design guidance about the most appropriate systems for treating these pollutants.

Low-Cost Measurement of Hydraulic Fracture Dimensions Using Pressure Data in Treatment and Observation Wells – A Workflow for Every Well

2021 ◽  
Author(s):  
A. Kirby Nicholson ◽  
Robert C. Bachman ◽  
R. Yvonne Scherz ◽  
Robert V. Hawkes
Keyword(s):  
Hydraulic Fracturing ◽  
Real Time ◽  
Hydraulic Fracture ◽  
Full Scale ◽  
Pressure Data ◽  
Observation Well ◽  
High Quality ◽  
Fracture Length ◽  
Geometry Model ◽  
Observation Wells

Abstract Pressure and stage volume are the least expensive and most readily available data for diagnostic analysis of hydraulic fracturing operations. Case history data from the Midland Basin is used to demonstrate how high-quality, time-synchronized pressure measurements at a treatment and an offsetting shut-in producing well can provide the necessary input to calculate fracture geometries at both wells and estimate perforation cluster efficiency at the treatment well. No special wellbore monitoring equipment is required. In summary, the methods outlined in this paper quantifies fracture geometries as compared to the more general observations of Daneshy (2020) and Haustveit et al. (2020). Pressures collected in Diagnostic Fracture Injection Tests (DFITs), select toe-stage full-scale fracture treatments, and offset observation wells are used to demonstrate a simple workflow. The pressure data combined with Volume to First Response (Vfr) at the observation well is used to create a geometry model of fracture length, width, and height estimates at the treatment well as illustrated in Figure 1. The producing fracture length of the observation well is also determined. Pressure Transient Analysis (PTA) techniques, a Perkins-Kern-Nordgren (PKN) fracture propagation model and offset well Fracture Driven Interaction (FDI) pressures are used to quantify hydraulic fracture dimensions. The PTA-derived Farfield Fracture Extension Pressure, FFEP, concept was introduced in Nicholson et al. (2019) and is summarized in Appendix B of this paper. FFEP replaces Instantaneous Shut-In Pressure, ISIP, for use in net pressure calculations. FFEP is determined and utilized in both DFITs and full-scale fracture inter-stage fall-off data. The use of the Primary Pressure Derivative (PPD) to accurately identify FFEP simplifies and speeds up the analysis, allowing for real time treatment decisions. This new technique is called Rapid-PTA. Additionally, the plotted shape and gradient of the observation-well pressure response can identify whether FDI's are hydraulic or poroelastic before a fracture stage is completed and may be used to change stage volume on the fly. Figure 1Fracture Geometry Model with FDI Pressure Matching Case studies are presented showing the full workflow required to generate the fracture geometry model. The component inputs for the model are presented including a toe-stage DFIT, inter-stage pressure fall-off, and the FDI pressure build-up. We discuss how to optimize these hydraulic fractures in hindsight (look-back) and what might have been done in real time during the completion operations given this workflow and field-ready advanced data-handling capability. Hydraulic fracturing operations can be optimized in real time using new Rapid-PTA techniques for high quality pressure data collected on treating and observation wells. This process opens the door for more advanced geometry modeling and for rapid design changes to save costs and improve well productivity and ultimate recovery.

scholarly journals Feedback Environment and Creativity in Education Organizations

2015 ◽  
Vol 3 (2) ◽  
pp. 121
Author(s):  
Ying-Leh Ling ◽  
Fairuz Ismail ◽  
Abdul Ghani Kanesan Abdullah
Keyword(s):  
Quantitative Study ◽  
Positive Relationship ◽  
Pearson Correlation ◽  
Study Data ◽  
Educational Organizations ◽  
Feedback Environment ◽  
High Quality ◽  
Significant Difference ◽  
Inferential Analysis ◽  
The Relationship

This study aims to examine the relationship between feedback environment practices and creativity in the educational organizations. This study is a quantitative study. A total of 40 polytechnic students from Polytechnic Kuching Sarawak are randomly selected to participate in this study. Data were obtained using a set of questionnaire consisting of three parts. The data obtained were analyzed descriptively and inferentially. Inferential analysis involves <em>t</em> test and Pearson correlation. The findings have shown that the level of feedback environment based on students' perception is high. Simultaneously, the level of creativity among the students is also high. The findings indicated that there is no significant difference in feedback environment between genders. Furthermore, the study also showed a significant and positive relationship between feedback environment and students’ creativity. The results of this study have several implications directly to the formation of high-quality students as feedback environment and students’ creativity are interrelated and inseparable in educational organizations.

scholarly journals Twenty-five tonnes of high quality forages annually in Canterbury

2004 ◽  
pp. 85-91
Author(s):  
T.J. Fraser ◽  
T.L. Knight ◽  
I.M. Knowles ◽  
M.G. Hyslop
Keyword(s):  
Lower Cost ◽  
Forage Yield ◽  
Dairy Calves ◽  
Forage Production ◽  
High Quality ◽  
Cereal Breeding ◽  
Significant Difference ◽  
Recent Developments ◽  
High Yields ◽  
Final Harvest

Recent developments in cereal breeding for forage production have given the potential to greatly increase annual forage dry matter (DM) production. This paper reports on the findings from two cereal forage production trials on irrigated Canterbury land. Trial 1 studied the potential of a range of single and multi-grazed cereal forages over a 9 month period to produce high yields and quality from both grazing and whole-crop silage forage. Trial 2 studied the suitability of different cereal/ legume combinations for green-chop silage grown over a three month summer period. These two cereal forage systems, when combined in a 12 month period, produced in excess of 25 tonnes of high quality forage per hectare, almost double the DM production achieved using current perennial pasture based systems. Trial 1 showed no significant difference in the total DM produced by either single or multi-graze treatments. In Trial 2 pea/cereal combinations produced over 6 t DM/ha. Due to an earlier final harvest the multi-graze system is more easily combined with the summer crop and more likely to produce a lower cost and more sustainable forage system. Animal performance on forage produced in Trial 1 showed that dairy calves can grow well on cereal forages during winter. Keywords: cereal, feed supplements, forage, forage yield, legume, silage

scholarly journals Live weight performance of three different breed of indonesian local chickens in starter phase

2021 ◽  
Vol 888 (1) ◽  
pp. 012009
Author(s):  
F Mustofa ◽  
A P Z N L Sari ◽  
A Agus ◽  
H Sasongko ◽  
E Suryanto ◽  
...  
Keyword(s):  
Analysis Of Variance ◽  
Live Weight ◽  
Performance Data ◽  
High Quality ◽  
Phase 0 ◽  
Significant Difference ◽  
Chicken Farm ◽  
Local Chicken ◽  
Weight Data ◽  
Local Chickens

Abstract The production of local chickens in Indonesia is determined by the availability of high-quality local chicken stocks. However, information on local chicken performance is limited, therefore, this study aims to determine the live weight performance of three local Indonesian chicken namely Merawang, Murung Panggang, and KUB in the starter phase. The study was conducted at chicken farm located in Semanu Gunung Kidul, Yogyakarta. Meanwhile, the live weight data were collected at the starter phase (0, 2, and 4 weeks. The samples consisted of 196 Merawang, 157 Murung Panggang, and 416 KUB chickens reared in a battery cage in a closed house under similar conditions. Furthermore, the live weight performance data were analyzed using analysis of variance (ANOVA). As a result, the Merawang chicken had the highest live weight (P<0.05) at the day-old chick (DOC) age. At the same age, no significant difference was detected between the KUB and Murung Panggang chicken (P>0.05). However, the live weight of Murung Panggang was significantly higher at 2 and 4 weeks compared to others (P< 0.05). Therefore, it was concluded that there are variations in the live weight of the three local chickens during the starter phase.

Sign in / Sign up

Export Citation Format

Share Document