scholarly journals Divergent scute asymmetry among pure and crossed individuals of Testudo hermanni (Gmelin, 1789)

Author(s):  
P. M. Parés–Casanova ◽  
J. Minoves ◽  
J. Soler ◽  
A. Martínez–Silvestre

Fluctuating asymmetry (FA) refers to subtle differences between left and right sides in bilaterally symmetrical organisms or their parts. Both genetic and environmental changes can increase FA, reflecting deterioration in developmental homeostasis of adult morphology due to a loss of developmental stability. In this study, we used geometric morphometric techniques to examine plastral scute asymmetries in a sample of 31 pure and crossed Testudo species (T. hermanni hermanni n = 23 and crosses with T. hermanni boettgeri n = 8) only females by means of 19 anatomical landmarks. Procrustes ANOVA indicated that FA in crossed individuals was significantly higher than that in pure individuals. Crossed individuals also showed a greater degree of phenotypic plasticity than T. hermanni hermanni. We conclude that crosses among T. hermanni hermanni and T. hermanni boettgeri can increase homozygosity and are responsible for greater developmental instabilities. Nonetheless, more information on crossed phenotypes could be of great interest to raise pure Hermann’s tortoises for reintroduction programmes. Key words: Carapace, Geometric morphometrics, Hybridization, Plastron, Testudines

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Michaela Kerschbaumer ◽  
Christian Sturmbauer

Fishes of the family Cichlidae are famous for their spectacular species flocks and therefore constitute a model system for the study of the pathways of adaptive radiation. Their radiation is connected to trophic specialization, manifested in dentition, head morphology, and body shape. Geometric morphometric methods have been established as efficient tools to quantify such differences in overall body shape or in particular morphological structures and meanwhile found wide application in evolutionary biology. As a common feature, these approaches define and analyze coordinates of anatomical landmarks, rather than traditional counts or measurements. Geometric morphometric methods have several merits compared to traditional morphometrics, particularly for the distinction and analysis of closely related entities. Cichlid evolutionary research benefits from the efficiency of data acquisition, the manifold opportunities of analyses, and the potential to visualize shape changes of those landmark-based methods. This paper briefly introduces to the concepts and methods of geometric morphometrics and presents a selection of publications where those techniques have been successfully applied to various aspects of cichlid fish diversification.


2018 ◽  
Author(s):  
Robert Z. Selden

While pursuing a study of 3D geometric morphometrics for ceramic burial vessels that often articulate with the Native American Graves Protection and Repatriation Act (NAGPRA) from the ancestral Caddo region, there have been no shortage of potentially meaningful observations, one of which--rotational asymmetry--is discussed here. Using Geomagic Design X (reverse-engineering software) and Geomagic Verify (inspection software), metrics associated with rotational asymmetry were generated and analyzed. Future directions include the incorporation of directional and fluctuating asymmetry measures of the widest vessel profiles, which were calculated in Design X then analyzed using the geomorph package in R. Preliminary results point toward gainful results that can be used to augment more traditional ceramic analyses as well as geometric morphometric studies of ceramic vessel shape.


2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Renan Rodrigues Rocha ◽  
Rosana de Mesquita Alves ◽  
Rubens Pasa ◽  
Karine Frehner Kavalco

The Astyanax scabripinnis complex is composed of a large number of almost morphological indistinguishable species, including Astyanax paranae and Astyanax rivularis, which exist in the Paraná and São Francisco Basins, respectively, and sometimes are considered subspecies of the A. scabripinnis group or even are cited just as A. scabripinnis. The two river basins are separated by the Upper Paranaíba Arc, likely the main cause of the isolation of these species. We used geometric morphometric tools and DNA analyses of populations of both species to identify the differences between them. Geometric morphometrics separated the two species into distinct groups, whose main difference was the body depth. This is generally related to the speed of the water flow in the river basins. The maximum likelihood phylogram based on mitochondrial DNA sequences formed two main clades: one composed of the population of A. rivularis and the other, of A. paranae. In the haplotype network, the species were similarly separated into two groups from the same ancestral haplotype, with A. rivularis dispersing into two lineages in the São Francisco River Basin. The distribution of A. paranae is a consequence of a secondary dispersion event in the Paraná River Basin. It forms two lineages from a haplotype derived from the ancestor. The vicariant effect of separate basins, through the elevation of the Upper Paranaíba Arc, led to the allopatric speciation of the populations originating the present species. The results of geometric morphometrics and molecular data of the fish show the importance of this geological event in the biogeography and evolutionary history of the ichthyofauna of the region and indicate that the isolation of these species seems to be effective.


Author(s):  
Valentina P. Vetrova ◽  
◽  
Alexey P. Barchenkov ◽  
Nadezhda V. Sinelnikova ◽  
◽  
...  

Geometric morphometric analysis of shape variation in the cone scales of two closely related larch species, Larix dahurica Laws. (=Larix gmelinii (Rupr.) Rupr) and L. cajanderi Mayr, was carried out. The data on the taxonomy and distribution of L. dahurica and L. cajanderi are contradictory. The taxonomic status of L. cajanderi has been confirmed by the genetic and morphological studies performed in Russia and based on considerable evidence, but the species has not been recognized internationally, being considered as a synonym of Larix gmelinii var. gmelinii. In the systematics of larch, morphological characters of the generative organs are mainly used as diagnostic markers, among the most important being the shape variation of the cone scales. The aim of this study was to test geometric morphometrics as a tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales. Characterization of shape variations in cone scales using geometric morphometric methods consists in digitizing points along an outline of scales followed by analysis of partial warps, describing individual differences in coordinates of the outline points. We studied the populations of L. dahurica from Evenkia and the Trans-Baikal region and six L. cajanderi populations from Yakutia and Magadan Oblast. In each population, we analyzed samples of 100-150 cones collected from 20-30 trees. Scales taken from the middle part of the cones were scanned using an Epson Perfection V500 Photo. On the scanned images, outline points were placed with a TPSDig program (Rolf, 2010), using angular algorithm (Oreshkova et al., 2015). The data were processed and analyzed using Integrated Morphometrics Programs (IMP) software (http://www.canisius.edu/~sheets/ morphsoft.html, Sheets, 2001), following the guidelines on geometric morphometrics in biology (Pavlinov, Mikeshina, 2002; Zelditch et al., 2004). Initial coordinates of the scale landmarks were aligned with the mean structure for L. dahurica and L. cajanderi cone scales using Procrustes superimposition in the CoordGen6 program. PCA based on covariances of partial warp scores was applied to reveal directions of variation in the shape of the cone scales. The relative deformations of the cone scales (PCA scores) were used as shape variables for statistical comparisons of these two larch species with canonical discriminant analysis. Morphotypes of the cone scales were distinguished in L. dahurica populations by pairwise comparison of samples from trees in the TwoGroup6h program using Bootstrap resampling-based Goodall’s F-test (Sheets, 2001). Samples from the trees in which the cone scales differed significantly (p < 0.01) were considered to belong to different morphotypes. Morphotypes distinguished in L. dahurica populations were compared with the morphotypes that we had previously determined in L. cajanderi populations. The composition and the frequency of occurrence of morphotypes were used to determine phenotypic distances between populations (Zhivotovskii, 1991). Multidimensional scaling matrix of the phenotypic distances was applied for ordination of larch populations. In this research, we revealed differentiation of L. dahurica and L. cajanderi using geometric morphometric analysis of the shape variation of cone scales. The results of PCA of partial warp scores exposed four principal components, which account for 90% of total explained variance in the shape of the cone scales in the two larch species. Graphical representations of these shape transformations in the vector form characterized directions of shape variability in scales corresponding to the maximum and minimum values of four principal components (See Fig. 2). PCA-ordination of the larch populations revealed some difference in the shape variation of the cone scales in L. dahurica and L. cajanderi (See Fig. 3). The results of canonical discriminant analysis of relative deformations of scales showed differentiation of the populations of the two larch species (See Fig. 4). Eleven morphotypes were identified in L. dahurica cones from Evenkia and nine morphotypes in the Ingoda population, three of the morphotypes being common for both populations (See Fig. 5). The shape of L. dahurica cone scales varied from spatulate to oval and their apical margins from weakly sinuate to distinctly sinuate. The Trans-Baikal population was dominated by scales with obtuse (truncate) and rounded apexes. The obtained morphotypes were compared with 25 cone scale morphotypes previously distinguished in the Yakut and the Magadan L. cajanderi populations (See Fig. 3). Four similar morphotypes of cone scales were revealed in the North-Yeniseisk population of L. dahurica and the Yakut populations of L. cajanderi. The differences between them in the populations of the two larch species were nonsignificant (p > 0.01). All morphotypes of cone scales from the Ingoda population of L. dahurica differed significantly from L. cajanderi cone scale morphotypes. The results of multidimensional scaling phenotypic distance matrix calculated based on the similarity of morphotypes of L. dahurica and L. cajanderi populations were consistent with the results of their differentiation based on relative deformations of scales obtained using canonical discriminant analysis (See Fig. 4 and Fig. 7). In spite of the differences in the shape of the cone scales between the North-Yeniseisk and the Trans-Baikal populations of L. dahurica, they both differed from L. cajanderi populations. Thus, phenotypic analysis confirmed differentiation of these two larch species. Despite the similarities between a number of morphotypes, the Yakut L. cajanderi populations were differentiated from L. dahurica populations. Significant differences were noted between intraspecific groups: between L. cajanderi populations from Okhotsk-Kolyma Upland and Yakutia and between L. dahurica populations from Evenkia and the Trans-Baikal region (See Fig. 4). The similarities between species and intraspecific differences may be attributed to the ongoing processes of hybridization and species formation in the region where the ranges of the larches overlap with the ranges of L. czekanowskii Szafer and L. dahurica×L. cajanderi hybrids. Geometric morphometrics can be used as an effective tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales.


2021 ◽  
Author(s):  
Shu Wang ◽  
Dao-Wei Zhou

Abstract The relationships among developmental stability, canalization and phenotypic plasticity have not been well understood. Inconsistent conclusions from different studies suggested the complexity of their associations, probably depending on specific traits, environmental contexts and plant growth stages. To address this issue, we conducted three experiments (EXP I ~ III) with several annual herbaceous species, to investigate the relationships among leaf (or cotyledon) developmental stability, canalization and plasticity and their variations with different biotic and abiotic environmental conditions and plant growth stages, with comparisons among different species at their early growth stage. We analyzed variations in mean trait value, lamina fluctuating asymmetry (FA), coefficient of variation (CV) and plasticity (RDPIs) and their correlations for lamina size (LS) of individual plants, for LS, petiole length (PL) and petiole angle (PA) of different plant layers in Abutilon theophrasti at three densities in infertile and fertile (or only fertile) soil conditions at three (or two) stages, and for cotyledon size (CS) of five species in contrasting light conditions and seeding depths. High vs. low density decreased LS (with negative RDPIs), FA indexes and CVs, either for individual plants or different layers, especially in fertile soil. Shading was more likely to increase CS (except for A. therophrasti) and FA and decrease CV; deep seeding increased CS of some species in full light, but decreased CS and FA of other species in shading (except for A. therophrasti). FA indexes more likely had positive correlations with mean value, CV and RDPIs of traits; correlations between CV and RDPIs can be positive, negative or insignificant. Correlations among the three variables were more likely positive or insignificant for traits of LS, CS and PL, but more likely negative or insignificant for PA. High density and infertile soil may favor more positive over negative correlations among variables. Results suggested higher levels of lamina FA more likely indicate higher growth rates of plants or modules. Developmental stability was more likely to have positive correlations with canalization, and negative correlations with plasticity, indicating certain common mechanisms associated with them. Environmental stresses can lead to greater phenotypic variations at different levels, facilitating cooperation between the three processes in dealing with environmental challenges.


Symmetry ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 1970
Author(s):  
Nina Turmukhametova ◽  
Elena Shadrina

We have estimated the reproductive capacity of Betulapendula Roth and its relationship with an integrated measure of developmental stability, i.e., fluctuating asymmetry (FA) of the leaf. On the territory of a city with moderate anthropogenic pollution, a change has been detected in the integrated fluctuating asymmetry (IFA) of the morphology of the female reproductive sphere and reproductive capacity of Betula pendula. In conditions of anthropogenic stress, the birch is observed to produce a large yield of fruits annually, which is not subject to year-to-year fluctuations. Morphological variety of size and shape of fruit-producing organs increases along the gradient of industrial and transport pollution; part of morphotypes of infructescences and seeds is characterized by lowered or zero capacity for reproduction determined by seed quality (germination energy and germination capacity). The statistical data processing involved correlation, Shapiro–Wilk test, Levene’s test, factorial ANOVA, Scheffe test, Kruskal–Wallis ANOVA, Mann–Whitney test, χ2 method. Analysis of IFA has allowed us to reasonably well assess the state of the plant organism and to characterize environmental quality. A negative correlation between IFA and quantitative parameters of the functions of the reproductive sphere of B. pendula (infructescence diameter, seed quality) has been found, and positive correlation with qualitative parameters (the number of morphs of infructescences and seeds, the share of rare morphs of infructescences). Pessimization of urban environment creates the conditions for an increase in the share of defective infructescences and non-germinating seeds; a compensatory mechanism for this is an increase in reproductive effort of B. pendula. The consistency of responses in the vegetative and reproductive spheres reflects the disturbances in developmental stability of plants in urban communities.


2021 ◽  
Vol 11 (17) ◽  
pp. 7848
Author(s):  
Darío Herranz-Rodrigo ◽  
Silvia J. Tardáguila-Giacomozzi ◽  
Lloyd A. Courtenay ◽  
Juan-José Rodríguez-Alba ◽  
Antonio Garrucho ◽  
...  

Recent studies using geometric morphometrics for taphonomy have yielded interesting results, opening new horizons of research in both archaeological and paleontological sites. Here we present the analysis of tooth pits left by male and female individuals of two different carnivore species (Panthera tigris and Panthera pardus) in order to see if sexual dimorphism influences the morphology of tooth pit marks. In the process, 3D-scanning and applied statistics were used. Based on samples derived from two individuals of different sexes, the present results indicate sexual dimorphism in these felid species to not be a conditioning factor of tooth pit morphology.


2020 ◽  
Vol 130 (4) ◽  
pp. 800-812 ◽  
Author(s):  
Juan Vrdoljak ◽  
Kevin Imanol Sanchez ◽  
Roberto Arreola-Ramos ◽  
Emilce Guadalupe Diaz Huesa ◽  
Alejandro Villagra ◽  
...  

Abstract The repeatability of findings is the key factor behind scientific reliability, and the failure to reproduce scientific findings has been termed the ‘replication crisis’. Geometric morphometrics is an established tool in evolutionary biology. However, different operators (and/or different methods) could act as large sources of variation in the data obtained. Here, we investigated inter-operator error in geometric morphometric protocols on complex shapes of Liolaemus lizards, as well as measurement error in three taxa varying in their difficulty of digitalization. We also examined the potential for these protocols to discriminate among complex shapes in closely related species. We found a wide range of inter-operator error, contributing between 19.5% and 60% to the total variation. Moreover, measurement error increased with the complexity of the quantified shape. All protocols were able to discriminate between species, but the use of more landmarks did not imply better performance. We present evidence that complex shapes reduce repeatability, highlighting the need to explore different sources of variation that could lead to such low repeatability. Lastly, we suggest some recommendations to improve the repeatability and reliability of geometric morphometrics results.


Sign in / Sign up

Export Citation Format

Share Document