scholarly journals Massive MIMO wireless networks: an overview

2021 ◽  
Author(s):  
Noha Hassan ◽  
Xavier N. Fernando
Keyword(s):  
Wireless Networks ◽  
Massive Mimo ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Heterogeneous Systems ◽  
Mimo Networks ◽  
Wireless Broadband ◽  
Input Multiple Output ◽  
Processing Techniques ◽  
Linear Algorithms

Massive multiple-input-multiple-output (MIMO) systems use few hundred antennas to simultaneously serve large number of wireless broadband terminals. It has been incorporated into standards like long term evolution (LTE) and IEEE802.11 (Wi-Fi). Basically, the more the antennas, the better shall be the performance. Massive MIMO systems envision accurate beamforming and decoding with simpler and possibly linear algorithms. However, efficient signal processing techniques have to be used at both ends to overcome the signaling overhead complexity. There are few fundamental issues about massive MIMO networks that need to be better understood before their successful deployment. In this paper, we present a detailed review of massive MIMO homogeneous, and heterogeneous systems, highlighting key system components, pros, cons, and research directions. In addition, we emphasize the advantage of employing millimeter wave (mmWave) frequency in the beamforming, and precoding operations in single, and multi-tier massive MIMO systems. Keywords: 5G wireless networks; massive MIMO; linear precoding; encoding; channel estimation; pilot contamination; beamforming; HetNets

scholarly journals Massive MIMO wireless networks: an overview

2021 ◽  
Author(s):  
Noha Hassan ◽  
Xavier N. Fernando
Keyword(s):  
Wireless Networks ◽  
Massive Mimo ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Heterogeneous Systems ◽  
Mimo Networks ◽  
Wireless Broadband ◽  
Input Multiple Output ◽  
Processing Techniques ◽  
Linear Algorithms

Massive multiple-input-multiple-output (MIMO) systems use few hundred antennas to simultaneously serve large number of wireless broadband terminals. It has been incorporated into standards like long term evolution (LTE) and IEEE802.11 (Wi-Fi). Basically, the more the antennas, the better shall be the performance. Massive MIMO systems envision accurate beamforming and decoding with simpler and possibly linear algorithms. However, efficient signal processing techniques have to be used at both ends to overcome the signaling overhead complexity. There are few fundamental issues about massive MIMO networks that need to be better understood before their successful deployment. In this paper, we present a detailed review of massive MIMO homogeneous, and heterogeneous systems, highlighting key system components, pros, cons, and research directions. In addition, we emphasize the advantage of employing millimeter wave (mmWave) frequency in the beamforming, and precoding operations in single, and multi-tier massive MIMO systems. Keywords: 5G wireless networks; massive MIMO; linear precoding; encoding; channel estimation; pilot contamination; beamforming; HetNets

scholarly journals SCHEDULING FOR MASSIVE MIMO USING CHANNEL AIGING UNDER QOS CONSTRAINTS

2019 ◽  
Vol 57 (5) ◽  
pp. 617
Author(s):  
Pham Hung ◽  
Bac Hoai Dang ◽  
Ban Tien Nguyen
Keyword(s):  
Massive Mimo ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Spatial Multiplexing ◽  
Bit Rate ◽  
Minimum Rate ◽  
Mimo Networks ◽  
Input Multiple Output ◽  
Sum Rate ◽  
Service Data

Massive multiple-input multiple-output (MIMO) networks support QoS (Quality of Service) by adding a new sublayer Service Data Adaption Protocol on the top of Packet Data Convergence Protocol layer to map between QoS flows and data radio bearers. In downlink for Guaranteed Bit Rate (GBR) flows, the gNB guarantees the Guaranteed Flow Bit Rate (GFBR) that defines the minimum bit rate the QoS flow can provide. So, one of the most important requirements is the minimum rate. The channel aiging helps to improve the sum-rate of Massive MIMO systems by serving more users to increase the spatial multiplexing gain without incurring additional pilot overhead. In this paper, a novel scheduler, termed QoS-Aware scheduling, is designed and proposed for Massive MIMO to use the channel aiging to increase the sum-rate but guarantee the minimum bit rate per user to support QoS. We investigate how many users are enough to serve to maximize the sum-rate while keeping the data rate per user meeting a given threshold. Through the numerical analysis we confirmed that QoS-Aware scheduling can guarantee a minimum rate per user and get a higher useful through-put (goodput) than conventional channel aiging schedulers.

PROBLEM STATEMENT OF JOINT ANTENNA SELECTION AND PRECODING IN MASSIVE MIMO COMMUNICATION SYSTEMS

2021 ◽  
Author(s):  
В.Б. КРЕЙНДЕЛИН ◽  
М.В. ГОЛУБЕВ
Keyword(s):  
Massive Mimo ◽  
Communication Systems ◽  
Mimo Systems ◽  
Antenna Selection ◽  
Multiple Input Multiple Output ◽  
Research Areas ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Legal Restrictions ◽  
Multiple Transmission

Совместный с прекодингом автовыбор антенн на приемной и передающей стороне - одно из перспективных направлений исследований для реализации технологий Multiple Transmission and Reception Points (Multi-TRP, множество точек передачи и приема) в системах со многими передающими и приемными антеннами Massive MIMO (Multiple-Input-Multiple-Output), которые активно развиваются в стандарте 5G. Проанализированы законодательные ограничения, влияющие на применимость технологий Massive MIMO, и специфика реализации разрабатываемого алгоритма в миллиметровомдиапа -зоне длин волн. Рассмотрены алгоритмы формирования матриц автовыбора антенн как на передающей, так и на приемной стороне. Сформулирована строгая математическая постановка задачи для двух критериев работы алгоритма: максимизация взаимной информации и минимизация среднеквадратичной ошибки. Joint precoding and antenna selection both on transmitter and receiver sides is one of the promising research areas for evolving toward the Multiple Transmission and Reception Points (Multi-TRP) concept in Massive MIMO systems. This technology is under active development in the coming 5G 3GPP releases. We analyze legal restrictions for the implementation of 5G Massive MIMO technologies in Russia and the specifics of the implementation of the developed algorithm in the millimeter wavelength range. Algorithms of antenna auto-selection matrices formation on both transmitting and receiving sides are considered. Two criteria are used for joint antenna selection and precoding: maximizing mutual information and minimizing mean square error.

scholarly journals The Downlink Performance for Cell-Free Massive MIMO with Instantaneous CSI in Slowly Time-Varying Channels

Entropy ◽  
2021 ◽  
Vol 23 (11) ◽  
pp. 1552
Author(s):  
Tongzhou Han ◽  
Danfeng Zhao
Keyword(s):  
Power Control ◽  
Massive Mimo ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Time Varying ◽  
Input Multiple Output ◽  
Efficiency Performance ◽  
A Cell ◽  
Time Varying Channel

In centralized massive multiple-input multiple-output (MIMO) systems, the channel hardening phenomenon can occur, in which the channel behaves as almost fully deterministic as the number of antennas increases. Nevertheless, in a cell-free massive MIMO system, the channel is less deterministic. In this paper, we propose using instantaneous channel state information (CSI) instead of statistical CSI to obtain the power control coefficient in cell-free massive MIMO. Access points (APs) and user equipment (UE) have sufficient time to obtain instantaneous CSI in a slowly time-varying channel environment. We derive the achievable downlink rate under instantaneous CSI for frequency division duplex (FDD) cell-free massive MIMO systems and apply the results to the power control coefficients. For FDD systems, quantized channel coefficients are proposed to reduce feedback overhead. The simulation results show that the spectral efficiency performance when using instantaneous CSI is approximately three times higher than that achieved using statistical CSI.

scholarly journals An Improved Jacobi-Based Detector for Massive MIMO Systems

Information ◽  
2019 ◽  
Vol 10 (5) ◽  
pp. 165 ◽  
Author(s):  
Xiaoqing Zhao ◽  
Zhengquan Li ◽  
Song Xing ◽  
Yang Liu ◽  
Qiong Wu ◽  
...  
Keyword(s):  
Massive Mimo ◽  
Communication Systems ◽  
Mimo Systems ◽  
Minimum Mean Square Error ◽  
Multiple Input Multiple Output ◽  
Correction Method ◽  
Detection Algorithm ◽  
Detection Accuracy ◽  
Input Multiple Output ◽  
Mmse Detector

Massive multiple-input-multiple-output (MIMO) is one of the key technologies in the fifth generation (5G) cellular communication systems. For uplink massive MIMO systems, the typical linear detection such as minimum mean square error (MMSE) presents a near-optimal performance. Due to the required direct matrix inverse, however, the MMSE detection algorithm becomes computationally very expensive, especially when the number of users is large. For achieving the high detection accuracy as well as reducing the computational complexity in massive MIMO systems, we propose an improved Jacobi iterative algorithm by accelerating the convergence rate in the signal detection process.Specifically, the steepest descent (SD) method is utilized to achieve an efficient searching direction. Then, the whole-correction method is applied to update the iterative process. As the result, the fast convergence and the low computationally complexity of the proposed Jacobi-based algorithm are obtained and proved. Simulation results also demonstrate that the proposed algorithm performs better than the conventional algorithms in terms of the bit error rate (BER) and achieves a near-optimal detection accuracy as the typical MMSE detector, but utilizing a small number of iterations.

scholarly journals An Evaluation of Successive Pilot Decontamination in Massive MIMO

2018 ◽  
Vol 39 (2) ◽  
pp. 107
Author(s):  
Victor Croisfelt Rodrigues ◽  
Taufik Abrão
Keyword(s):  
Spectral Efficiency ◽  
Massive Mimo ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Pilot Training ◽  
Pilot Contamination ◽  
Fundamental Issue ◽  
Data Rates ◽  
Multiple Input ◽  
Input Multiple Output

The demand for higher data rates can be satisfied by the spectral efficiency (SE) improvement offered by Massive multiple-input multiple-output (M-MIMO) systems. However, the pilot contamination remains as a fundamental issue to obtain the paramount SE in such systems. This propitiated the research of several methods to mitigate pilot contamination. One of these procedures is based on the coordination of the cells, culminating in proposals with multiple pilot training phases. This paper aims to expand the results of the original paper, whereby the concepts of large pilot training phases were offered. The evaluation of such method was conducted through more comprehensible numerical results, in which a large number of antennas were assumed and more rigorous SE expressions were used. The channel estimation approaches relying on multiple pilot training phases were considered cumbersome for implementation and an uninteresting solution to overcome pilot contamination; contradicting the results presented in the genuine paper.

scholarly journals Multi-Objective Optimization of Massive MIMO 5G Wireless Networks towards Power Consumption, Uplink and Downlink Exposure

2019 ◽  
Vol 9 (22) ◽  
pp. 4974 ◽  
Author(s):  
Michel Matalatala ◽  
Margot Deruyck ◽  
Sergei Shikhantsov ◽  
Emmeric Tanghe ◽  
David Plets ◽  
...  
Keyword(s):  
Wireless Networks ◽  
Electric Field ◽  
Power Consumption ◽  
Massive Mimo ◽  
Rapid Development ◽  
Multiple Input Multiple Output ◽  
Base Stations ◽  
Reference Scenario ◽  
User Coverage ◽  
Input Multiple Output

The rapid development of the number of wireless broadband devices requires that the induced uplink exposure be addressed during the design of the future wireless networks, in addition to the downlink exposure due to the transmission of the base stations. In this paper, the positions and power levels of massive MIMO-LTE (Multiple Input Multiple Output-Long Term Evolution) base stations are optimized towards low power consumption, low downlink and uplink electromagnetic exposure and maximal user coverage. A suburban area in Ghent, Belgium has been considered. The results show that the higher the number of BS antenna elements, the fewer number of BSs the massive MIMO network requires. This leads to a decrease of the downlink exposure (−12% for the electric field and −32% for the downlink dose) and an increase of the uplink exposure (+70% for the uplink dose), whereas both downlink and uplink exposure increase with the number of simultaneous served users (+174% for the electric field and +22% for the uplink SAR). The optimal massive MIMO network presenting the better trade-off between the power consumption, the total dose and the user coverage has been obtained with 37 64-antenna BSs. Moreover, the level of the downlink electromagnetic exposure (electric field) of the massive MIMO network is 5 times lower than the 4G reference scenario.

scholarly journals A Survey on Massive MIMO Systems in Presence of Channel and Hardware Impairments

Sensors ◽  
2019 ◽  
Vol 19 (1) ◽  
pp. 164 ◽  
Author(s):  
Zahra Mokhtari ◽  
Maryam Sabbaghian ◽  
Rui Dinis
Keyword(s):  
Massive Mimo ◽  
Orthogonal Frequency Division Multiplexing ◽  
Mimo Systems ◽  
Low Cost ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Aging Effects ◽  
Hardware Impairments ◽  
Single Carrier ◽  
Input Multiple Output

Massive multiple input multiple output (MIMO) technology is one of the promising technologies for fifth generation (5G) cellular communications. In this technology, each cell has a base station (BS) with a large number of antennas, allowing the simultaneous use of the same resources (e.g., frequency and/or time slots) by multiple users of a cell. Therefore, massive MIMO systems can bring very high spectral and power efficiencies. However, this technology faces some important issues that need to be addressed. One of these issues is the performance degradation due to hardware impairments, since low-cost RF chains need to be employed. Another issue is the channel estimation and channel aging effects, especially in fast mobility environments. In this paper we will perform a comprehensive study on these two issues considering two of the most promising candidate waveforms for massive MIMO systems: Orthogonal frequency division multiplexing (OFDM) and single-carrier frequency domain processing (SC-FDP). The studies and the results show that hardware impairments and inaccurate channel knowledge can degrade the performance of massive MIMO systems extensively. However, using suitable low complex estimation and compensation techniques and also selecting a suitable waveform can reduce these effects.

scholarly journals An improvement to hybrid beamforming precoding scheme for mmWave massive MIMO systems based on channel matrix

2021 ◽  
Vol 23 (1) ◽  
pp. 285
Author(s):  
Zahra Amirifar ◽  
Jamshid Abouei
Keyword(s):  
Massive Mimo ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Wireless Systems ◽  
Achievable Rate ◽  
Percentage Difference ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Hybrid Beamforming ◽  
Mimo Technology

<p>The massive multiple-input multiple-output (MIMO) technology has been applied innew generation wireless systems due to growing demand for reliability and high datarate. Hybrid beamforming architectures in both receiver and transmitter, includinganalog and digital precoders, play a significant role in 5G communication networksand have recently attracted a lot of attention. In this paper, we propose a simple andeffective beamforming precoder approach for mmWave massive MIMO systems. Wefirst solve an optimization problem by a simplification subject, and in the second step,we use the covariance channel matrixfCk=Cov(Hk)andBk=HkHHkinstead of chan-nel matrixHk. Simulation results verify that the proposed scheme can enjoy a highersum rate and energy efficiency than previous methods such as spatially sparse method,analog method, and conventional hybrid method even with inaccurate Channel StateInformation (CSI). Percentage difference of the achievable rate ofCk=Cov(Hk)andBk=HkHHkschemes compared to conventional methods are 2.51% and 48.94%, re-spectively.</p>

scholarly journals Massive MIMO-NOMA Networks with Imperfect SIC: Design and Fairness Enhancement

2020 ◽  
Author(s):  
Arthur Sousa de Sena ◽  
Pedro Nardelli
Keyword(s):  
Outage Probability ◽  
Power Allocation ◽  
Interference Cancellation ◽  
Massive Mimo ◽  
Multiple Access ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Optimal Solution ◽  
Input Multiple Output ◽  
The Impact

This paper addresses multi-user multi-cluster massive multiple-input-multiple-output (MIMO) systems with non-orthogonal multiple access (NOMA). Assuming the downlink mode, and taking into consideration the impact of imperfect successive interference cancellation (SIC), an in-depth analytical analysis is carried out, in which closed-form expressions for the outage probability and ergodic rates are derived. Subsequently, the power allocation coefficients of users within each sub-group are optimized to maximize fairness. The considered power optimization is simplified to a convex problem, which makes it possible to obtain the optimal solution via Karush-Kuhn-Tucker (KKT) conditions. Based on the achieved solution, we propose an iterative algorithm to provide fairness also among different sub-groups. Simulation results alongside with insightful discussions are provided to investigate the impact of imperfect SIC and demonstrate the fairness superiority of the proposed dynamic power allocation policies. For example, our results show that if the residual error propagation levels are high, the employment of orthogonal multiple access (OMA) is always preferable than NOMA. It is also shown that the proposed power allocation outperforms conventional massive MIMO-NOMA setups operating with fixed power allocation strategies in terms of outage probability.

Sign in / Sign up

Export Citation Format

Share Document