scholarly journals Piezoelectric Energy Harvesting with an Ultrasonic Vibration Source

Actuators ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 8
Author(s):  
Tao Li ◽  
Pooi Lee
Keyword(s):  
Energy Harvesting ◽  
High Power ◽  
High Frequency ◽  
Energy Harvester ◽  
Impedance Matching ◽  
Low Frequency ◽  
Vibration Source ◽  
Piezoelectric Energy ◽  
Power Ultrasonic ◽  
Ultrasonic Cutting

A piezoelectric energy harvester was developed in this paper. It is actuated by the vibration leakage from the nodal position of a high-power ultrasonic cutting transducer. The harvester was excited at a low displacement amplitude (0.73 µmpp). However, its operation frequency is quite high and reaches the ultrasonic range (24.4 kHz). Compared with another low frequency harvester (66 Hz), both theoretical and experimental results proved that the advantages of this high frequency harvester include (i) high current generation capability (up to 20 mApp compared to 1.3 mApp of the 66 Hz transducer) and (ii) low impedance matching resistance (500 Ω in contrast to 50 kΩ of the 66 Hz transducer). This energy harvester can be applied either in sensing, or vibration controlling, or simply energy harvesting in a high-power ultrasonic system.

Linear and Non Linear Energy Harvesting From Bridge Vibrations

2016 ◽  
Author(s):  
Francesco Orfei ◽  
Helios Vocca ◽  
Luca Gammaitoni
Keyword(s):  
Time Series ◽  
Energy Harvesting ◽  
High Frequency ◽  
Energy Harvester ◽  
Low Frequency ◽  
Vibration Energy ◽  
Highway Bridge ◽  
Piezoelectric Energy ◽  
Non Linear ◽  
Bridge Vibrations

In this paper we analyze the performances of three different energy harvester configurations aimed at transforming vibration energy from a vehicle transited bridge. First of all we sampled the vibrations of a highway bridge in three different positions: at the entrance, in the middle and at the exit. Then, from the sampled time series, we reproduced the vibrations in the lab and tested the different harvesting configurations: low frequency linear piezoelectric energy harvester; high frequency linear piezoelectric energy harvester; non-linear bi-stable broadband piezoelectric energy harvester. The results are presented in terms of the RMS power converted. All the harvesters were built with the same piezoelectric material: composition and size were always the same.

Broadband Rotational Energy Harvesting Using Micro Energy Harvester

2018 ◽  
Author(s):  
Jui-Ta Chien ◽  
Yung-Hsing Fu ◽  
Chao-Ting Chen ◽  
Shun-Chiu Lin ◽  
Yi-Chung Shu ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Output Voltage ◽  
Energy Harvester ◽  
Low Frequency ◽  
Rotational Energy ◽  
Open Circuit ◽  
Maximum Output ◽  
Rotational Excitation ◽  
Rotating Speed ◽  
Piezoelectric Energy

This paper proposes a broadband rotational energy harvesting setup by using micro piezoelectric energy harvester (PEH). When driven in different rotating speed, the PEH can output relatively high power which exhibits the phenomenon of frequency up-conversion transforming the low frequency of rotation into the high frequency of resonant vibration. It aims to power self-powered devices used in the applications, like smart tires, smart bearings, and health monitoring sensors on rotational machines. Through the excitation of the rotary magnetic repulsion, the cantilever beam presents periodically damped oscillation. Under the rotational excitation, the maximum output voltage and power of PEH with optimal impedance is 28.2 Vpp and 663 μW, respectively. The output performance of the same energy harvester driven in ordinary vibrational based excitation is compared with rotational oscillation under open circuit condition. The maximum output voltage under 2.5g acceleration level of vibration is 27.54 Vpp while the peak output voltage of 36.5 Vpp in rotational excitation (in 265 rpm).

Optimizing the Electrical Power in an Energy Harvesting System

2015 ◽  
Vol 25 (12) ◽  
pp. 1550171 ◽  
Author(s):  
Mattia Coccolo ◽  
Grzegorz Litak ◽  
Jesús M. Seoane ◽  
Miguel A. F. Sanjuán
Keyword(s):  
Energy Harvesting ◽  
Kinetic Energy ◽  
High Frequency ◽  
Energy Harvester ◽  
Electrical Power ◽  
Low Frequency ◽  
Electrical Energy ◽  
Resonance Phenomenon ◽  
Vibrational Resonance ◽  
Energy Harvesting System

In this paper, we study the vibrational resonance (VR) phenomenon as a useful mechanism for energy harvesting purposes. A system, driven by a low frequency and a high frequency forcing, can give birth to the vibrational resonance phenomenon, when the two forcing amplitudes resonate and a maximum in amplitude is reached. We apply this idea to a bistable oscillator that can convert environmental kinetic energy into electrical energy, that is, an energy harvester. Normally, the VR phenomenon is studied in terms of the forcing amplitudes or of the frequencies, that are not always easy to adjust and change. Here, we study the VR generated by tuning another parameter that is possible to manipulate when the forcing values depend on the environmental conditions. We have investigated the dependence of the maximum response due to the VR for small and large variations in the forcing amplitudes and frequencies. Besides, we have plotted color coded figures in the space of the two forcing amplitudes, in which it is possible to appreciate different patterns in the electrical power generated by the system. These patterns provide useful information on the forcing amplitudes in order to produce the optimal electrical power.

Energy Harvesting Performance of Vertically Staggered Rectangle-Through-Holes Cantilevered in Piezoelectric Vibration Energy Harvester

2019 ◽  
Author(s):  
Shan Gao ◽  
Hongrui Ao ◽  
Hongyuan Jiang
Keyword(s):  
Energy Harvesting ◽  
Integrated Circuits ◽  
Resonant Frequency ◽  
High Power ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Piezoelectric Energy ◽  
Piezoelectric Vibration

Abstract Piezoelectric vibration energy harvesting technology has attracted significant attention for its applications in integrated circuits, microelectronic devices and wireless sensors due to high power density, easy integration, simple configuration and other outstanding features. Among piezoelectric vibration energy harvesting structures, cantilevered beam is one of the simplest and most commonly used structures. In this work, a vertically staggered rectangle-through-holes (VS-RTH) cantilevered model of mesoscale piezoelectric energy harvester is proposed, which focuses on the multi-directional vibration collection and low resonant frequency. To verify the output performances of the device, this paper employs basic materials and fabrication methods with mathematical modeling. The simulations are conducted through finite element methods to discuss the properties of VS-RTH energy harvester on resonant frequency and output characteristics. Besides, an energy storage circuit with high power collection rate is adopted as collection system. This harvester is beneficial to the further application of devices working with continuous vibrations and low power requirements.

A novel low-frequency broadband piezoelectric energy harvester combined with a negative stiffness vibration isolator

2019 ◽  
Vol 30 (7) ◽  
pp. 1105-1114 ◽  
Author(s):  
Dongxing Cao ◽  
Xiangying Guo ◽  
Wenhua Hu
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Low Frequency ◽  
Negative Stiffness ◽  
Vibration Energy ◽  
Vibration Isolator ◽  
Vibration Energy Harvester ◽  
Piezoelectric Energy ◽  
Piezoelectric Vibration Energy Harvester ◽  
Piezoelectric Vibration

The transformation of waste vibration energy into low-power electricity has been intensely researched over the last decade to enable self-sustained wireless electronic components. Many kinds of nonlinear oscillators have been explored by several research groups in an effort to enhance the frequency bandwidth of operation. The negative stiffness vibration isolator, as a kind of passive vibration isolator, has undergone extensive investigation because of its low-frequency isolator characteristics. In this article, a novel broadband piezoelectric vibration energy harvester, which can be used for low-frequency ambient mechanical energy harvesting, is designed, and its dynamic responses are analyzed based on the advantage of the negative stiffness vibration isolator. The multi-scale perturbation method is applied to solve the electromechanical equations of the piezoelectric vibration energy harvester and obtain approximate analytical solutions. Solutions based on the analytical method and numerical simulations reveal the characteristics of significant broadband performance. The effects of the various system parameters on the frequency responses and output voltage of the piezoelectric vibration energy harvester system are investigated in detail, and the vibration isolation ability is verified by experimental measurements. It was concluded that the proposed piezoelectric vibration energy harvester achieved broadband vibration energy harvesting in the low-frequency vibration range.

scholarly journals A Review on Piezoelectric Energy Harvesting: Materials, Methods, and Circuits

2019 ◽  
Vol 4 (1) ◽  
pp. 3-39 ◽  
Author(s):  
Shashank Priya ◽  
Hyun-Cheol Song ◽  
Yuan Zhou ◽  
Ronnie Varghese ◽  
Anuj Chopra ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Power Management ◽  
Energy Harvester ◽  
Piezoelectric Materials ◽  
Low Frequency ◽  
Small Scale ◽  
Piezoelectric Energy Harvesting ◽  
Wide Bandwidth ◽  
Piezoelectric Energy ◽  
Continuous Power

Abstract Piezoelectric microelectromechanical systems (PiezoMEMS) are attractive for developing next generation self-powered microsystems. PiezoMEMS promises to eliminate the costly assembly for microsensors/microsystems and provide various mechanisms for recharging the batteries, thereby, moving us closer towards batteryless wireless sensors systems and networks. In order to achieve practical implementation of this technology, a fully assembled energy harvester on the order of a quarter size dollar coin (diameter=24.26 mm, thickness=1.75 mm) should be able to generate about 100 μW continuous power from low frequency ambient vibrations (below 100 Hz). This paper reviews the state-of-the-art in microscale piezoelectric energy harvesting, summarizing key metrics such as power density and bandwidth of reported structures at low frequency input. This paper also describes the recent advancements in piezoelectric materials and resonator structures. Epitaxial growth and grain texturing of piezoelectric materials is being developed to achieve much higher energy conversion efficiency. For embedded medical systems, lead-free piezoelectric thin films are being developed and MEMS processes for these new classes of materials are being investigated. Non-linear resonating beams for wide bandwidth resonance are also reviewed as they would enable wide bandwidth and low frequency operation of energy harvesters. Particle/granule spray deposition techniques such as aerosol-deposition (AD) and granule spray in vacuum (GSV) are being matured to realize the meso-scale structures in a rapid manner. Another important element of an energy harvester is a power management circuit, which should maximize the net energy harvested. Towards this objective, it is essential for the power management circuit of a small-scale energy harvester to dissipate minimal power, and thus it requires special circuit design techniques and a simple maximum power point tracking scheme. Overall, the progress made by the research and industrial community has brought the energy harvesting technology closer to the practical applications in near future.

Self-Start Piezoelectric Energy Harvesting Circuit With Adjustable UVLO Converter for Wireless Sensor Network

2017 ◽  
Author(s):  
Hyun Jun Jung ◽  
Soobum Lee ◽  
Hamid Jabbar ◽  
Se Yeong Jeong ◽  
Tae Hyun Sung
Keyword(s):  
Wireless Sensor Network ◽  
Energy Harvesting ◽  
Sensor Network ◽  
Energy Harvester ◽  
Impedance Matching ◽  
Wireless Sensor ◽  
Experimental Result ◽  
Piezoelectric Energy Harvesting ◽  
Wireless Sensor Node ◽  
Piezoelectric Energy

This paper proposes a self-start piezoelectric energy harvesting circuit with an undervoltage-lockout (UVLO) converter for a wireless sensor network (WSN). First, a self-start circuit with mini piezoelectric energy harvester (PEH) is designed to supply the power for operation of the oscillator without battery. The experimental results show that a batteryless self-start circuit successfully operates the oscillator with mini-PEH, and self-starting time is 0.45 s. Second, this paper proposes an adjustable UVLO converter that can supply the power even if a power consumption of a wireless sensor node is higher than generated power from PEH. The experimental result shows the adjustable UVLO converter supplies 45 mW for 0.12 s after charging the output power of an impedance matching circuit (1.7 mW) for 10 s. This paper shows that the proposed circuit successfully overcomes challenging issues — self-start and lower power generation — for powering WSN.

scholarly journals Topology Optimisation for High Frequency Vibration Energy Harvesting

2021 ◽  
Keyword(s):  
Energy Harvesting ◽  
High Frequency ◽  
Energy Harvester ◽  
Spring Steel ◽  
Condition Based Maintenance ◽  
Vibration Energy ◽  
Topology Optimisation ◽  
Vibration Energy Harvesting ◽  
Piezoelectric Energy ◽  
Maintenance Systems

Abstract. Topology optimisation has been used to design a piezoelectric energy harvester capable of harvesting the vibration present on a helicopter gearbox. The gearbox vibrations, with frequencies in the kilo-hertz range and having amplitudes of 10-100g (where g = 9.81 m/s2), are generated by gear-meshing within the transmission. These accelerations, large in amplitude and high in frequency, are ideal sources for vibration energy harvesting, with the harvested power potentially used to power autonomous condition-based-maintenance systems. This paper will discuss the first and simplest of the harvesters that were designed and manufactured, i.e. a 0.51 mm thick spring steel cantilever that uses a Pz27 piezoceramic transducer, which is sensitive to 1900 Hz gearbox vibrations and can produce 300 µW from a 2g host acceleration.

scholarly journals A Low-Frequency MEMS Piezoelectric Energy Harvesting System Based on Frequency Up-Conversion Mechanism

Micromachines ◽  
2019 ◽  
Vol 10 (10) ◽  
pp. 639 ◽  
Author(s):  
Manjuan Huang ◽  
Cheng Hou ◽  
Yunfei Li ◽  
Huicong Liu ◽  
Fengxia Wang ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
High Frequency ◽  
Low Frequency ◽  
Piezoelectric Energy Harvesting ◽  
Piezoelectric Energy ◽  
Mems Fabrication ◽  
Piezoelectric Cantilever ◽  
Energy Harvesting System ◽  
Micro Electromechanical System ◽  
The Impact

This paper proposes an impact-based micro piezoelectric energy harvesting system (PEHS) working with the frequency up-conversion mechanism. The PEHS consists of a high-frequency straight piezoelectric cantilever (SPC), a low-frequency S-shaped stainless-steel cantilever (SSC), and supporting frames. During the vibration, the frequency up-conversion behavior is realized through the impact between the bottom low-frequency cantilever and the top high-frequency cantilever. The SPC used in the system is fabricated using a new micro electromechanical system (MEMS) fabrication process for a piezoelectric thick film on silicon substrate. The output performances of the single SPC and the PEHS under different excitation accelerations are tested. In the experiment, the normalized power density of the PEHS is 0.216 μW·g−1·Hz−1·cm−3 at 0.3 g acceleration, which is 34 times higher than that of the SPC at the same acceleration level of 0.3 g. The PEHS can improve the output power under the low frequency and low acceleration scenario.

Sign in / Sign up

Export Citation Format

Share Document