scholarly journals Synthesis of Electrospun TiO2 Nanofibers and Characterization of Their Antibacterial and Antibiofilm Potential against Gram-Positive and Gram-Negative Bacteria

Antibiotics ◽  
2020 ◽  
Vol 9 (9) ◽  
pp. 572 ◽  
Author(s):  
Mohammad Azam Ansari ◽  
Hani Manssor Albetran ◽  
Muidh Hamed Alheshibri ◽  
Abdelmajid Timoumi ◽  
Norah Abdullah Algarou ◽  
...  
Keyword(s):  
Waste Water ◽  
Water Treatment ◽  
Biofilm Formation ◽  
Waste Water Treatment ◽  
Morphological Alteration ◽  
Dependent Manner ◽  
Gram Positive ◽  
Tio2 Nanofibers ◽  
Gram Negative ◽  
Argon Mixture

Recently, titanium dioxide (TiO2) nanomaterials have gained increased attention because of their cost-effective, safe, stable, non-toxic, non-carcinogenic, photocatalytic, bactericidal, biomedical, industrial and waste-water treatment applications. The aim of the present work is the synthesis of electrospun TiO2 nanofibers (NFs) in the presence of different amounts of air–argon mixtures using sol-gel and electrospinning approaches. The physicochemical properties of the synthesized NFs were examined by scanning and transmission electron microscopies (SEM and TEM) coupled with energy-dispersive X-ray spectroscopy (EDX), ultraviolet-visible spectroscopy and thermogravimetric analyzer (TGA). The antibacterial and antibiofilm activity of synthesized NFs against Gram-negative Pseudomonas aeruginosa and Gram-positive methicillin-resistant Staphylococcusaureus (MRSA) was investigated by determining their minimum bacteriostatic and bactericidal values. The topological and morphological alteration caused by TiO2 NFs in bacterial cells was further analyzed by SEM. TiO2 NFs that were calcined in a 25% air-75% argon mixture showed maximum antibacterial and antibiofilm activities. The minimum inhibitory concentration (MIC)/minimum bactericidal concentration (MBC) value of TiO2 NFs against P. aeruginosa was 3 and 6 mg/mL and that for MRSA was 6 and 12 mg/mL, respectively. The MIC/MBC and SEM results show that TiO2 NFs were more active against Gram-negative P. aeruginosa cells than Gram-positive S. aureus. The inhibition of biofilm formation by TiO2 NFs was investigated quantitatively by tissue culture plate method using crystal violet assay and it was found that TiO2 NFs inhibited biofilm formation by MRSA and P. aeruginosa in a dose-dependent manner. TiO2 NFs calcined in a 25% air-75% argon mixture exhibited maximum biofilm formation inhibition of 75.2% for MRSA and 72.3% for P. aeruginosa at 2 mg/mL, respectively. The antibacterial and antibiofilm results suggest that TiO2 NFs can be used to coat various inanimate objects, in food packaging and in waste-water treatment and purification to prevent bacterial growth and biofilm formation.

Carbon quantum dots anchored TiO2 nanofibers: Effective photocatalyst for waste water treatment

2015 ◽  
Vol 41 (9) ◽  
pp. 11953-11959 ◽  
Author(s):  
Prem Singh Saud ◽  
Bishweshwar Pant ◽  
Al-Mahmnur Alam ◽  
Zafar Khan Ghouri ◽  
Mira Park ◽  
...  
Keyword(s):  
Waste Water ◽  
Quantum Dots ◽  
Water Treatment ◽  
Waste Water Treatment ◽  
Carbon Quantum Dots ◽  
Tio2 Nanofibers ◽  
Anchored Tio2

The new technology of waste water treatment by using bioreactors with bio membranous movable bed – biochips

2020 ◽  
Vol 10 (3) ◽  
pp. 276-292
Author(s):  
Maria Y. Savostyanova ◽  
◽  
Lidia А. Norina ◽  
Arina V. Nikolaeva ◽  
◽  
...  
Keyword(s):  
Waste Water ◽  
Water Treatment ◽  
Water Resources ◽  
Waste Water Treatment ◽  
Combined Treatment ◽  
Research Work ◽  
Pollution Level ◽  
Waste Waters ◽  
Treatment Facilities ◽  
Movable Bed

Retaining of water resources quality is one of the global ecological problems of the modern time. The most promising direction in solving the problem of water resources protection is the reduction of negative environmental influence of waste water from production facilities by upgrading the existing water treatment technologies. To treat utility water, technical and rain water from site facilities of Transneft system entities, the specialists developed and approved standard technological diagrams, which are used in producing treatment facilities. The standard technological diagrams provide for all necessary stages of waste water treatment ensures the reduction of pollution level to normal values. However, during operation of treatment facilities it was established, that to ensure the required quality of waste water treatment with initially high levels of pollution, the new technological solutions are necessary. The author presents the results of scientific-research work, in the context of which the best affordable technologies were identified in the area of the treatment of waste water with increased content of pollutants and non-uniform ingress pattern. On the basis of the research results the technical solutions were developed for optimization of operation of existing waste water treatment facilities by means of using combined treatment of technical and rain waters and utility waste waters and applying bioreactor with movable bed – biochips. The use of bioreactor with movable bed allows the increase in the area of active surface, which facilitates increase and retention of biomass. Biochips are completely immersed into waste waters, and biofilm is formed on the entire volume of immersion area, facilitating retention of biomass and preventing formation of sediments. Due to mixing the floating device with biofilm constantly moves along the whole area of bioreactor, and, in doing so, speeds up biochemical processes and uniformity of treatment. The advantages of a bioreactor with movable bed – its active sludge durability against increased and changing pollutant concentrations, change of waste water temperature and simplicity of application – ensured the possibility of its use for blending utility waters, technical and rain waters.

REVIEWS OF ELECTROCOAGULATION PROCESS ON WASTE WATER TREATMENT TECHNOLOGY

2017 ◽  
Vol 9 (1) ◽  
Author(s):  
Taty Hernaningsih
Keyword(s):  
Waste Water ◽  
Water Treatment ◽  
Removal Efficiency ◽  
Industrial Waste ◽  
Waste Water Treatment ◽  
Treatment Technique ◽  
Industrial Waste Water ◽  
Strong Current ◽  
Current Voltage ◽  
Electrocoagulation Process

Waste water treatment by industry usually uses chemicals that may lead to additional environmental pollution load. On the other hand, water demand increases and environmental regulations regarding waste water disposal requirements that apply more stringent. It is necessary for waste treatment technique that accommodate this requirement. Electrocoagulation process is a technique of wastewater treatment that has been chosen because the technique is environmentally friendly. This paper will review some of the research or application electrocoagulation process which is conducted on industrial waste water. Types of industrial waste water that is to be reviewed include: industries batik, sarongs, textiles, palm oil, slaughterhouses, food, leather tanning, laundry, pulp and paper. Overview reviewed in this research include the waste water treatment process in several processing variations such as: change in time, electricity and kind of electrodes. The results of the research with electrocoagulation process in the industry are the removal efficiency of TSS, COD, BOD5, Chrome, phosphate, surfactants, color turbidity influenced by several factors including time, strong current, voltage, distance and type of electrode and pH. The results of the study with electrocoagulation process in the industry is the removal efficiency of TSS, COD, BOD5, chromium, phosphate, surfactant, turbidity color that are influenced by several factors including time, strong current, voltage, distance and type of electrode and pH. It is hoped the information presented in this article can be a reference for similar research for the improvement of research on the process ektrokoagulasi.Key words: elektrocoagulation, removal eficiency, environmental friendly

Sign in / Sign up

Export Citation Format

Share Document