scholarly journals Additive Manufacturing in the Construction Industry: The Comparative Competitiveness of 3D Concrete Printing

2021 ◽  
Vol 11 (9) ◽  
pp. 3865
Author(s):  
Siavash H. Khajavi ◽  
Müge Tetik ◽  
Ashish Mohite ◽  
Antti Peltokorpi ◽  
Mingyang Li ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Construction Industry ◽  
Positive Impact ◽  
Three Dimensional ◽  
Cost Effective ◽  
Robotic Arm ◽  
Process Time ◽  
Current State ◽  
The Cost ◽  
The Impact

The construction industry is facing increasing pressure to improve productivity and decrease its environmental impact. Additive manufacturing (AM) technologies, especially three-dimensional concrete printing (3DCP) technology, have provided many benefits for construction. However, holistic comparative studies of the competitiveness of 3DCP and conventional methods, from cost and time perspectives, are lacking. Choosing between the methods is difficult for practitioners. In this study, we investigated the current state of 3DCP in the construction industry using seven distinct scenarios. Our analysis was performed to illustrate the impact of design and supply chain configurations on performance. The results prove the notable competitiveness of 3DCP. In contrast to the conventional construction method, the more complex round design had a positive impact on the cost and process time in 3DCP scenarios. Additionally, we show that on-site 3DCP using a robotic arm was more cost-effective than off-site 3DCP.

Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations

2015 ◽  
Vol 137 (1) ◽  
Author(s):  
Yong Huang ◽  
Ming C. Leu ◽  
Jyoti Mazumder ◽  
Alkan Donmez
Keyword(s):  
Additive Manufacturing ◽  
Research University ◽  
Three Dimensional ◽  
Cost Effective ◽  
Layer By Layer ◽  
Current State ◽  
Future Potential ◽  
Traditional Manufacturing ◽  
Research And Education ◽  
Complicated Geometries

Additive manufacturing (AM), the process of joining materials to make objects from three-dimensional (3D) model data, usually layer by layer, is distinctly a different form and has many advantages over traditional manufacturing processes. Commonly known as “3D printing,” AM provides a cost-effective and time-efficient way to produce low-volume, customized products with complicated geometries and advanced material properties and functionality. As a result of the 2013 National Science Foundation (NSF) Workshop on Frontiers of Additive Manufacturing Research and Education, this paper summarizes AM's current state, future potential, gaps and needs, as well as recommendations for technology and research, university–industry collaboration and technology transfer, and education and training.

ECONOMIC SUBSTANTIATION OF TRANSITION TO PERSONNEL OUTSOURCING IN THE ORGANIZATIONS OF THE CONSTRUCTION INDUSTRY

2020 ◽  
pp. 70-79
Author(s):  
V.V. Verna
Keyword(s):  
Cost Effectiveness ◽  
Construction Industry ◽  
Methodological Approaches ◽  
Construction Organization ◽  
The Cost ◽  
The Impact

The article provides a rationale for methodological approaches to assessing the effectiveness of outsourcing in organizations of the construction industry using the example of outsourcing schemes to perform personnel functions. The conditional example shows the impact of the use of outsourcing on reducing the costs of a construction organization. The main prerequisites for the use of outsourcing in the activities of enterprises in the construction industry are identified, methodological approaches to assessing the cost-effectiveness of personnel outsourcing in the construction industry enterprises are substantiated.

Pound Wise and Penny Foolish? Weight Loss and The Dynamics of Health Care Spending

2011 ◽  
Vol 14 (2) ◽  
Author(s):  
Thomas G Koch
Keyword(s):  
Weight Loss ◽  
Cost Savings ◽  
Cost Effective ◽  
Economic Consequences ◽  
Health Care Spending ◽  
Order Of Magnitude ◽  
Dynamic Measures ◽  
The Cost ◽  
The Impact ◽  
The Relationship

Current estimates of obesity costs ignore the impact of future weight loss and gain, and may either over or underestimate economic consequences of weight loss. In light of this, I construct static and dynamic measures of medical costs associated with body mass index (BMI), to be balanced against the cost of one-time interventions. This study finds that ignoring the implications of weight loss and gain over time overstates the medical-cost savings of such interventions by an order of magnitude. When the relationship between spending and age is allowed to vary, weight-loss attempts appear to be cost-effective starting and ending with middle age. Some interventions recently proven to decrease weight may also be cost-effective.

scholarly journals Cost-effectiveness and feasibility of conditional economic incentives and motivational interviewing to improve HIV health outcomes of adolescents living with HIV in Anambra State, Nigeria

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Obinna Ikechukwu Ekwunife ◽  
Chinelo Janefrances Ofomata ◽  
Charles Ebuka Okafor ◽  
Maureen Ugonwa Anetoh ◽  
Stephen Okorafor Kalu ◽  
...  
Keyword(s):  
Viral Load ◽  
Cost Effectiveness ◽  
Service Delivery ◽  
Motivational Interviewing ◽  
Cost Effective ◽  
Economic Incentives ◽  
Additional Patient ◽  
Incentive Scheme ◽  
The Cost ◽  
The Impact

Abstract Background In sub-Saharan Africa, there is increasing mortality and morbidity of adolescents due to poor linkage, retention in HIV care and adherence to antiretroviral therapy (ART). This is a result of limited adolescent-centred service delivery interventions. This cost-effectiveness and feasibility study were piggybacked on a cluster-randomized trial that assessed the impact of an adolescent-centred service delivery intervention. The service delivery intervention examined the impact of an incentive scheme consisting of conditional economic incentives and motivational interviewing on the health outcomes of adolescents living with HIV in Nigeria. Method A cost-effectiveness analysis from the healthcare provider’s perspective was performed to assess the cost per additional patient achieving undetected viral load through the proposed intervention. The cost-effectiveness of the incentive scheme over routine care was estimated using the incremental cost-effectiveness ratio (ICER), expressed as cost/patient who achieved an undetectable viral load. We performed a univariate sensitivity analysis to examine the effect of key parameters on the ICER. An in-depth interview was conducted on the healthcare personnel in the intervention arm to explore the feasibility of implementing the service delivery intervention in HIV treatment hospitals in Nigeria. Result The ICER of the Incentive Scheme intervention compared to routine care was US$1419 per additional patient with undetectable viral load. Going by the cost-effectiveness threshold of US$1137 per quality-adjusted life-years suggested by Woods et al., 2016, the intervention was not cost-effective. The sensitivity test showed that the intervention will be cost-effective if the frequency of CD4 count and viral load tests are reduced from quarterly to triannually. Healthcare professionals reported that patients’ acceptance of the intervention was very high. Conclusion The conditional economic incentives and motivational interviewing was not cost-effective, but can become cost-effective if the frequency of HIV quality of life indicator tests are performed 1–3 times per annum. Patients’ acceptance of the intervention was very high. However, healthcare professionals believed that sustaining the intervention may be difficult unless factors such as government commitment and healthcare provider diligence are duly addressed. Trial registration This trial is registered in the WHO International Clinical Trials Registry through the WHO International Registry Network (PACTR201806003040425).

scholarly journals A Reference Framework to Combine Model-Based Design and AR to Improve Social Sustainability

2021 ◽  
Vol 13 (4) ◽  
pp. 2031
Author(s):  
Fabio Grandi ◽  
Riccardo Karim Khamaisi ◽  
Margherita Peruzzini ◽  
Roberto Raffaeli ◽  
Marcello Pellicciari
Keyword(s):  
Positive Impact ◽  
Cost Effective ◽  
Digital Models ◽  
Model Based ◽  
Digital Contents ◽  
Recent Developments ◽  
Virtual Simulations ◽  
Product And Process ◽  
The Impact ◽  
Time Information

Product and process digitalization is pervading numerous areas in the industry to improve quality and reduce costs. In particular, digital models enable virtual simulations to predict product and process performances, as well as to generate digital contents to improve the general workflow. Digital models can also contain additional contents (e.g., model-based design (MBD)) to provide online and on-time information about process operations and management, as well as to support operator activities. The recent developments in augmented reality (AR) offer new specific interfaces to promote the great diffusion of digital contents into industrial processes, thanks to flexible and robust applications, as well as cost-effective devices. However, the impact of AR applications on sustainability is still poorly explored in research. In this direction, this paper proposed an innovative approach to exploit MBD and introduce AR interfaces in the industry to support human intensive processes. Indeed, in those processes, the human contribution is still crucial to guaranteeing the expected product quality (e.g., quality inspection). The paper also analyzed how this new concept can benefit sustainability and define a set of metrics to assess the positive impact on sustainability, focusing on social aspects.

scholarly journals Addition of Flucytosine to Fluconazole for the Treatment of Cryptococcal Meningitis in Africa: A Multicountry Cost-effectiveness Analysis

2019 ◽  
Vol 70 (1) ◽  
pp. 26-29 ◽  
Author(s):  
Tinevimbo Shiri ◽  
Angela Loyse ◽  
Lawrence Mwenge ◽  
Tao Chen ◽  
Shabir Lakhi ◽  
...  
Keyword(s):  
Sensitivity Analysis ◽  
Cost Effectiveness ◽  
Cryptococcal Meningitis ◽  
Cost Effective ◽  
Immunodeficiency Virus ◽  
The Mean ◽  
The Cost ◽  
The Impact ◽  
Costing Analysis ◽  
Very High

Abstract Background Mortality from cryptococcal meningitis remains very high in Africa. In the Advancing Cryptococcal Meningitis Treatment for Africa (ACTA) trial, 2 weeks of fluconazole (FLU) plus flucytosine (5FC) was as effective and less costly than 2 weeks of amphotericin-based regimens. However, many African settings treat with FLU monotherapy, and the cost-effectiveness of adding 5FC to FLU is uncertain. Methods The effectiveness and costs of FLU+5FC were taken from ACTA, which included a costing analysis at the Zambian site. The effectiveness of FLU was derived from cohorts of consecutively enrolled patients, managed in respects other than drug therapy, as were participants in ACTA. FLU costs were derived from costs of FLU+5FC in ACTA, by subtracting 5FC drug and monitoring costs. The cost-effectiveness of FLU+5FC vs FLU alone was measured as the incremental cost-effectiveness ratio (ICER). A probabilistic sensitivity analysis assessed uncertainties and a bivariate deterministic sensitivity analysis examined the impact of varying mortality and 5FC drug costs on the ICER. Results The mean costs per patient were US $847 (95% confidence interval [CI] $776–927) for FLU+5FC, and US $628 (95% CI $557–709) for FLU. The 10-week mortality rate was 35.1% (95% CI 28.9–41.7%) with FLU+5FC and 53.8% (95% CI 43.1–64.1%) with FLU. At the current 5FC price of US $1.30 per 500 mg tablet, the ICER of 5FC+FLU versus FLU alone was US $65 (95% CI $28–208) per life-year saved. Reducing the 5FC cost to between US $0.80 and US $0.40 per 500 mg resulted in an ICER between US $44 and US $28 per life-year saved. Conclusions The addition of 5FC to FLU is cost-effective for cryptococcal meningitis treatment in Africa and, if made available widely, could substantially reduce mortality rates among human immunodeficiency virus–infected persons in Africa.

scholarly journals The impact of online marketing on start-up’s - theoritical frame work

2021 ◽  
Vol 11 (3) ◽  
pp. 55-57
Author(s):  
Rani C ◽  
Harshavardhan V ◽  
Harshith G
Keyword(s):  
21St Century ◽  
Small Businesses ◽  
Cost Effective ◽  
Online Marketing ◽  
Positive Side ◽  
Frame Work ◽  
The Cost ◽  
Start Ups ◽  
The Impact ◽  
The Way

In the 21st century online marketing is the most effective wayof advertising any product or service.Online marketing helps the smallbusinesses and also startup’sin a significant manner.online marketing happens in a virtual and interactive space where the promotion of products and services takes place. The advancement in technology has drastically changed the way of marketing. In online marketing the cost-effective compared to the traditional marketing. Most of the startup’s fail due to a lack of proper strategy.Onlinemarketing is innovativelycreating a platform for start-ups in innovative manner to reach the customers the main motto of this presentation is to show the positive side of the online marketing on start-ups and small businesses.

Sustainable development

2014 ◽  
Vol 32 (4) ◽  
pp. 315-330 ◽  
Author(s):  
Michelle C. Brennan ◽  
Alison J. Cotgrave
Keyword(s):  
Sustainable Development ◽  
Construction Industry ◽  
Positive Impact ◽  
Successful Implementation ◽  
Content Type ◽  
Current State ◽  
The Status ◽  
The Many ◽  
The Uk ◽  
Industry Professionals

Purpose – Despite the surge of interest in construction sustainability and the many Government initiatives encouraging reform in the UK construction industry (CI), the prevalence of sustainable development (SD) in the industry is still largely lagging behind that of other industries. Given the amount of focus and activity identified nationally in this area, the purpose of this paper is to investigate the reasons why this is not being translated into action and to seek counsel from industry professionals as to how they believe change can be achieved with a particular focus on how they believe higher education institutions (HEIs) can contribute. Design/methodology/approach – An explorative, qualitative study using three focus groups was of construction professionals. Findings – Despite a lack of action, many in industry support sustainability and actively attempt to engage in sustainable practices but a number of barriers preclude successful implementation. Government initiatives are having a positive impact, with participants believing that both Government and HEIs are imperative in driving the sustainability agenda forward. Research limitations/implications – Whilst limited in scale, this paper highlights the current state of the CI in relation to SD and evidences that progress is being made albeit slowly. The findings may help both Government and HEIs alongside industry in achieving how this can be overcome. Originality/value – Previous research in this area has generally adopted a quantitative approach. Adopting a qualitative approach provides a more in depth view as to why the status quo remains with regards to SD in the CI.

Additive Manufacturing of Porous Ceramics with Foaming Agent

2021 ◽  
pp. 1-21
Author(s):  
Zipeng Guo ◽  
Lu An ◽  
Sushil Lakshmanan ◽  
Jason Armstrong ◽  
Shenqiang Ren ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Ambient Pressure ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Cost Effective ◽  
Tensile Tests ◽  
Porous Ceramics ◽  
Foaming Agent ◽  
Printing Quality ◽  
And Control

Abstract The macro-porous ceramics has promising durability and thermal insulation performance. As porous ceramics find more and more applications across many industries, a cost-effective and scalable additive manufacturing technique for fabricating macro-porous ceramics is highly desirable. Herein, we reported a facile additive manufacturing approach to fabricate porous ceramics and control the printed porosity. Several printable ceramic inks were prepared, the foaming agent was added to generate gaseous bubbles in the ink, followed by the direct ink writing and the ambient-pressure and room-temperature drying to create the three-dimensional geometries. A set of experimental studies were performed to optimize the printing quality. The results revealed the optimal process parameters for printing the foamed ceramic ink with a high spatial resolution and fine surface quality. Varying the concentration of the foaming agent enables the controllability of the structural porosity. The maximum porosity can reach 85%, with a crack-free internal porous structure. The tensile tests showed that the printed macro-porous ceramics possessed enhanced durability with the addition of fiber. With a high-fidelity 3D printing process and the precise controllability of the porosity, we showed that the printed samples exhibited a remarkably low thermal conductivity and durable mechanical strength.

scholarly journals A Cost-Effectiveness Analysis of Newborn Screening for Severe Combined Immunodeficiency in the UK

2019 ◽  
Vol 5 (3) ◽  
pp. 28 ◽  
Author(s):  
Alice Bessey ◽  
James Chilcott ◽  
Joanna Leaviss ◽  
Carmen de la Cruz ◽  
Ruth Wong
Keyword(s):  
Cost Effectiveness ◽  
Severe Combined Immunodeficiency ◽  
Cost Effective ◽  
Sensitivity Analyses ◽  
Combined Immunodeficiency ◽  
Tree Model ◽  
Life Years ◽  
The Uk ◽  
The Cost ◽  
The Impact

Severe combined immunodeficiency (SCID) can be detected through newborn bloodspot screening. In the UK, the National Screening Committee (NSC) requires screening programmes to be cost-effective at standard UK thresholds. To assess the cost-effectiveness of SCID screening for the NSC, a decision-tree model with lifetable estimates of outcomes was built. Model structure and parameterisation were informed by systematic review and expert clinical judgment. A public service perspective was used and lifetime costs and quality-adjusted life years (QALYs) were discounted at 3.5%. Probabilistic, one-way sensitivity analyses and an exploratory disbenefit analysis for the identification of non-SCID patients were conducted. Screening for SCID was estimated to result in an incremental cost-effectiveness ratio (ICER) of £18,222 with a reduction in SCID mortality from 8.1 (5–12) to 1.7 (0.6–4.0) cases per year of screening. Results were sensitive to a number of parameters, including the cost of the screening test, the incidence of SCID and the disbenefit to the healthy at birth and false-positive cases. Screening for SCID is likely to be cost-effective at £20,000 per QALY, key uncertainties relate to the impact on false positives and the impact on the identification of children with non-SCID T Cell lymphopenia.

Sign in / Sign up

Export Citation Format

Share Document