scholarly journals Supercapacitor Assisted Hybrid PV System for Efficient Solar Energy Harnessing

Electronics ◽  
2021 ◽  
Vol 10 (19) ◽  
pp. 2422
Author(s):  
Kasun Piyumal ◽  
Aruna Ranaweera ◽  
Sudath Kalingamudali ◽  
Nihal Kularatna
Keyword(s):  
Impedance Matching ◽  
Maximum Power ◽  
Alternative Methods ◽  
Limited Attention ◽  
Pv System ◽  
Dc Microgrid ◽  
Load Impedance ◽  
Pv Array ◽  
Power Stage ◽  
In Series

In photovoltaic (PV) systems, maximum power point (MPP) is tracked by matching the load impedance to the internal impedance of the PV array by adjusting the duty cycle of the associated DC-DC converter. Scientists are trying to improve the efficiency of these converters by improving the performance of the power stage, while limited attention is given to finding alternative methods. This article describes a novel supercapacitor (SC) assisted technique to enhance the efficiency of a PV system without modifying the power stage of the charge controller. The proposed system is an SC—battery hybrid PV system where an SC bank is coupled in series with a PV array to enhance the overall system efficiency. Developed prototype of the proposed system with SC assisted loss circumvention embedded with a DC microgrid application detailed in the article showed that the average efficiency of the PV system is increased by 8%. This article further describes the theoretical and experimental investigation of the impedance matching technique for the proposed PV system, explaining how to adapt typical impedance matching for maximum power transfer.

scholarly journals Modeling and Simulation of a PV Module Based Power System Using MATLAB/Simulink

2015 ◽  
Vol 62 (2) ◽  
pp. 127-132 ◽  
Author(s):  
Protap Kumar Mahanta ◽  
Khokan Debnath ◽  
Md Habibur Rahman
Keyword(s):  
Solar Irradiance ◽  
Maximum Power ◽  
Solar Pv ◽  
Pv System ◽  
Matlab Simulink ◽  
Pv Module ◽  
Power Stage ◽  
In Series ◽  
Natural Variable ◽  
And Performance

Due to the variation of solar irradiance, temperature and shading conditions, the power generated by a photovoltaic (PV) module and hence the power delivered to the load changes drastically, which imposes the need for analysis of a complete PV system to get the maximum power under these natural variable conditions. In this paper, a complete off-grid PV module based power generation system has been designed and simulated using MATLAB/Simulink and performance has been scrutinized using the value of standard solar irradiance about 1 KW/m-2 for Bangladesh. The simulation model includes solar PV module, the converter power stage with MPPT control and charge controlling functions and here performance of each block has been examined conspicuously. Eventually, it has been found that the model is quite competent to simulate both the I-V and P-V characteristics of a PV module and based on the result it has been predicted that the performance of several modules or even PV array connected in series and/or in parallel with the delivery of maximum power can be tested under different solar irradiance and temperature conditions. DOI: http://dx.doi.org/10.3329/dujs.v62i2.21977 Dhaka Univ. J. Sci. 62(2): 127-132, 2014 (July)

scholarly journals High-Flexibility MPPT Techniques with Communication Scan Network for PV Micro-Grid System

Processes ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 117
Author(s):  
Yu-Kai Chen ◽  
Hong-Wen Hsu ◽  
Chau-Chung Song ◽  
Yu-Syun Chen
Keyword(s):  
Output Voltage ◽  
High Efficiency ◽  
Maximum Power ◽  
Global Maximum ◽  
Switching Frequency ◽  
Grid System ◽  
Pv System ◽  
In Series ◽  
Micro Grid ◽  
High Flexibility

This paper proposes the design and implementation of inductor-inductor-capacitor (LLC) converters with modules connected in series with the power scan method and communication scan network (CSN) to achieve MPPT and regulate the output voltage for the PV micro-grid system. The Dc/Dc converters includes six isolated LLC modules in series to supply ±380 V output voltage and track the maximum power point of the PV system. The series LLC converters are adopted to achieve high efficiency and high flexibility for the PV micro-grid system. The proposed global maximum power scan technique is implemented to achieve global maximum power tracking by adjusting the switching frequency of the LLC converter. To improve the system flexibility and achieve system redundancy, module failure can be detected in real time with a communication scan network, and then the output voltage of other modules will be changed by adjusting the switching frequency to maintain the same voltage as before the failure. Additionally, the proposed communication scan network includes the RS-485 interface of the MPPT series module and the CAN BUS communication interface with other subsystems’ communication for the PV micro-grid application system. Finally, a 6 kW MPPT prototype with a communication scan network is implemented and the proposed control method is verified for the PV system.

scholarly journals A Cuckoo MPPT based SMC Control for Grid tied PV System

2020 ◽  
pp. 22-26
Author(s):  
G Vaddikasulu , Meneni Saigeetha
Keyword(s):  
Output Power ◽  
Weather Conditions ◽  
Atmospheric Temperature ◽  
Maximum Power ◽  
Photovoltaic System ◽  
Solar Irradiation ◽  
Pv System ◽  
Pv Array ◽  
Cloudy Weather ◽  
Pv Cell

Maximum power point techniques (MPPT) are used in photovoltaic system to make full utilization of PV array output power. The output power of PV array is always changing with weather conditions i.e., solar irradiation and atmospheric temperature. PV cell generates power by converting sunlight into electricity. The electric power generated is proportional to solar radiation. PV cell can generate around 0.5 to 0.8 volts. During cloudy weather due to varying insolation levels the output of PV array varies. The MPPT is a process which tracks the maximum power from array and by increasing the duty cycle of the DC-DC boost converter, the output voltage of the system is increased. This paper presents the cuckoo mppt technique for PV system along with SMC controller methods in grid connected photovoltaic (PV) systems for optimizing the solar energy efficiency

scholarly journals Design of Converters for PV System Under Partial Shading Conditions

2017 ◽  
Vol 6 (2) ◽  
pp. 77
Author(s):  
M. Kowsalya ◽  
K. Balsubramanyam
Keyword(s):  
Power Level ◽  
Maximum Power ◽  
Duty Ratio ◽  
The Novel ◽  
Pv System ◽  
Partial Shading ◽  
Photovoltaic Modules ◽  
Bidirectional Converter ◽  
Control Scheme ◽  
In Series

This paper presents a maximum power generation with the interconnection of photovoltaic modules under partially shaded and/or mismatching conditions. The partial shading condition reduces power level of each module. The reduction in power due to the partial shading will be compensated by the bidirectional converter. The proposed system consisting of two and three PV modules connected in series under partial shading conditions which are capable of increasing the power levels up to 50% compared to conventional by-pass diode structure. In general ‘n’ number of modules connected in series so that the maximum power gain will be expected to (100/n) %. This is achieved by developing the new control strategy in which the correct adjustment of converter duty ratio under partially shading conditions. The novel control scheme is developed by using analysis of the power converters. The proposed scheme was verified in MATLAB/SIMULINK.

scholarly journals A Novel Artificial Intelligence based Hybrid Maximum Power Point Tracking Technique for Solar Photovoltaic System

2020 ◽  
Author(s):  
Mohammad junaid Khan
Keyword(s):  
Artificial Intelligence ◽  
Maximum Power ◽  
Solar Pv ◽  
Pv System ◽  
Maximum Power Point ◽  
Ecological Conditions ◽  
Pv Array ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Power Point

Abstract Backgrounds: Solar photo-voltaic (PV) arrays have non-linear characteristics with distinctive maximum power point (MPP) which relies on ecological conditions such as solar radiation and ambient temperature. In order to obtain continuous maximum power (MP) from PV arrays under varying ecological conditions, maximum power point tracking (MPPT) control methods are employed. MPPT is utilized to extract MP from the solar PV array, high-performance soft computing techniques can be used as an MPPT technique. Results: In order to show the feasibility and performance of the proposed Artificial Intelligence based Perturbe and Observe (AIAPO) MPPT controller, a simulation analysis has been carried out using the PV system. Combined results with different MPPT systems for power, voltage and current waveforms are the output values increase to 272.4W, 157V and 1.74A respectively. Using proposed AIAPO MPPT provides more accurate and stable result as compared to Perturbe and Observe (PO), Fuzzy Logic (FL) and Artificial Neural Network (ANN) based MPPT Technique. As per the experimentation performed by various MPPT techniques are carried out for PV system which are clearly indicating that the comparative analysis of power, voltage and current performance of PV system (i.e. have been recorded 272.4W, 157V and 1.74A) using proposed MPPT method which is better than the PO based MPPT (i.e. 169.1W, 127V, 1.43A), FL based MPPT technique (i.e. 256.9W, 152V, 1.69A) and ANN based MPPT technique (i.e. 265W, 154V, 1.71A) correspondingly. Conclusions: The aim of this paper is to track MPP from the solar PV array by the proposed hybrid controller for irradiation changes and comparing results with PO, FL and ANN based MPPT controllers. Different MPPT techniques have been used to compute MPP and improved efficiency of the PV panel. AIAPO, ANN, FL and PO MPPT methods have been chosen to obtain this objective. Simulation results showing that the system in which proposed control method has been used gives better performance and reduce fluctuations of the MPP as compared to PO, FL and ANN based MPPT technique at rapid changes of irradiation. In order to fabricate a reliable and real time hybrid system, there is a massive scope of research to develop multi-input renewable energy systems.

scholarly journals Numerical Modeling, Simulation and Evaluation of Conventional and Hybrid Photovoltaic Modules Interconnection Configurations under Partial Shading Conditions

2021 ◽  
Author(s):  
Faisal Saeed ◽  
Haider Ali Tauqeer ◽  
Hasan Erteza Gelani ◽  
Muhammad Hassan Yousuf
Keyword(s):  
Power Loss ◽  
Simulation Analysis ◽  
Maximum Power ◽  
Power Losses ◽  
Partial Shading ◽  
Power Characteristics ◽  
Pv Array ◽  
Pv Modules ◽  
In Series ◽  
Simulation And Evaluation

Partial shading on solar photovoltaic (PV) arrays is a prevalent problem in photovoltaic systems that impair the performance of PV modules and is responsible for reduced power output as compared to that in standard irradiance conditions thereby resulting in the appearance of multiple maximas on panel output power characteristics. These maxims contribute to mismatch power losses among PV modules. The mismatch losses depend on shading characteristics together with different interconnected configuration schemes of PV modules. The research presents a comparative analysis of partial shading effects on a 4 x4 PV array system connected in series(S), parallel (P), serries-parallel (SP),total-cross-tied (TCT),central-cross-tied(CCT),bridge-linked(BL),bridge-linked total cross-tied (BLTCT) ,honey-comb(HC), honey-comb total-cross-tied (HCTCT) and ladder (LD) configurations using MATLAB/Simulink. The PV module SPR-X20-250-BLK was used for modeling and simulation analysis. Each module is comprised of 72 number of PV cells and a combination of 16 PV modules was employed for the contextual analysis. Accurate mathematical modeling for the HCTCT configuration under partial shading conditions (PSCs) is provided for the first time and is verified from the simulation. The different configuration schemes were investigated under short-narrow,short-wide,long-narrow,long-wide, diagonal, entire row distribution, and entire column distribution partial shading condition patterns with mathematical implementation and simulation of passing clouds. The performance of array configurations is compared in terms of maximum power generated ), mismatch power loss (∆), relative power loss ) and the fill factor (FF). It was inferred that on average, TCT configuration yielded maximum power generation under all shading patterns among all PV modules interconnection configurations with minimum mismatch power losses followed by hybrid and conventional PV array configurations respectively.

scholarly journals Investigation of Photovoltaic Grid System under Non-Uniform Irradiance Conditions

Electronics ◽  
2020 ◽  
Vol 9 (9) ◽  
pp. 1512
Author(s):  
Mithun Madhukumar ◽  
Tonse Suresh ◽  
Mohsin Jamil
Keyword(s):  
Maximum Power ◽  
Solar Irradiation ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Pv System ◽  
Power Extraction ◽  
Pv Array ◽  
Grid Synchronization ◽  
Incremental Conductance ◽  
Conductance Method

Photovoltaic (PV) systems have recently been recognized as a leading way in the production of renewable electricity. Due to the unpredictable changes in environmental patterns, the amount of solar irradiation and cell operating temperature affect the power generated by the PV system. This paper, therefore, discusses the grid-integrated PV system to extract maximum power from the PV array to supply load requirements and the supply surplus power to the AC grid. The primary design is to have maximum power point tracking (MPPT) of the non-uniformly irradiated PV array, conversion efficiency maximization, and grid synchronization. This paper investigates various MPPT control algorithms using incremental conductance method, which effectively increased the performance and reduced error, hence helped to extract solar array’s power more efficiently. Additionally, other issues of PV grid-connected system such as network stability, power quality, and grid synchronization functions were implemented. The control of the voltage source converter is designed in such a way that PV power generated is synchronous to the grid. This paper also includes a comparative analysis of two MPPT techniques such as incremental conductance (INC) and perturb-and-observe (P&O). Extensive simulation of various controllers has been conducted to achieve enhanced efficient power extraction, grid synchronization and minimal performance loss due to dynamic tracking errors, particularly under fast-changing irradiation in Matlab/Simulink. The overall results favour INC algorithm and meet the required standards.

scholarly journals Performance Analysis of Maximum Power Point Tracking Algorithms Under Varying Irradiation

2017 ◽  
Vol 6 (1) ◽  
pp. 65-74 ◽  
Author(s):  
Bhukya Krishna Naick ◽  
Tarun Kumar Chatterjee ◽  
Kalyan Chatterjee
Keyword(s):  
Performance Analysis ◽  
Maximum Power Point Tracking ◽  
Maximum Power ◽  
Pv System ◽  
Maximum Power Point ◽  
Pv Array ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Tracking Algorithms ◽  
Power Point

Photovoltaic (PV) system is one of the reliable alternative sources of energy and its contribution in energy sector is growing rapidly. The performance of PV system depends upon the solar insolation, which will be varying throughout the day, season and year. The biggest challenge is to obtain the maximum power from PV array at varying insolation levels. The maximum power point tracking (MPPT) controller, in association with tracking algorithm will act as a principal element in driving the PV system at maximum power point (MPP). In this paper, the simulation model has been developed and the results were compared for perturb and observe, incremental conductance, extremum seeking control and fuzzy logic controller based MPPT algorithms at different irradiation levels on a 10 KW PV array. The results obtained were analysed in terms of convergence rate and their efficiency to track the MPP.Article History: Received 3rd Oct 2016; Received in revised form 6th January 2017; Accepted 10th February 2017; Available onlineHow to Cite This Article: Naick, B. K., Chatterjee, T. K. & Chatterjee, K. (2017) Performance Analysis of Maximum Power Point Tracking Algorithms Under Varying Irradiation. Int Journal of Renewable Energy Development, 6(1), 65-74.http://dx.doi.org/10.14710/ijred.6.1.65-74

Research and Simulation of Photovoltaic System MPPT Control Based on Fuzzy Algorithm

2013 ◽  
Vol 740 ◽  
pp. 164-169
Author(s):  
Li Ping Zhang ◽  
Yao Fu Zhu ◽  
Zhong Fan
Keyword(s):  
Duty Cycle ◽  
Impedance Matching ◽  
Size Control ◽  
Maximum Power ◽  
Photovoltaic System ◽  
Variable Step Size ◽  
Step Size ◽  
Pv System ◽  
Fuzzy Algorithm ◽  
Point Tracking

The maximum power point tracking (MPPT) control implements an effective utilization of solar energy. On the basis of the equivalent mathematical model of the photovoltaic (PV) array, presents the fixed step size perturbation and observation method, which has considerable power loss and poor adaptability. Because the existing variable step size control is complex, a fuzzy algorithm controller was designed according to the power variation and the previous step of the duty cycle, which could adjust the duty cycle of PWM dynamically, to make the PV system impedance matching and obtain the maximum power rapidly and steadily. The simulation shows that the self-optimizing fuzzy control can achieve good adaptability and good robustness when the parameters change.

Optimization of Photovoltaic Array Configurations in Photovoltaic System

2014 ◽  
Vol 1070-1072 ◽  
pp. 48-51
Author(s):  
Wen Ting Jia ◽  
Xue Ye Wei ◽  
Jun Hong Zhang ◽  
Yi Fei Meng
Keyword(s):  
Output Power ◽  
Photovoltaic Cell ◽  
Energy Conversion Efficiency ◽  
Maximum Power ◽  
Photovoltaic System ◽  
Pv System ◽  
Maximum Power Point ◽  
Photovoltaic Array ◽  
Pv Array ◽  
Power Point

Closely related to the actual output power and the light intensity, the temperature of the photovoltaic cell panel and the load of the PV array or the like. In the case of the external environment is stable and load conditions change, the output power of the PV modules exist Maximum Power Point, in order to improve the self-tracking PV system energy conversion efficiency, maximum power point tracking method may ensure the system running at maximum power points. Photovoltaic power generation system, optimize allocation method of PV array are also discussed in this paper.

Sign in / Sign up

Export Citation Format

Share Document