scholarly journals Analysis of Wind Turbine Aging through Operation Data Calibrated by LiDAR Measurement

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2319
Author(s):  
Hyun-Goo Kim ◽  
Jin-Young Kim
Keyword(s):  
Power Generation ◽  
Wind Speed ◽  
Wind Turbine ◽  
Wind Farm ◽  
Free Stream ◽  
Turbine Blades ◽  
Wind Farms ◽  
Lidar Measurement ◽  
Wind Turbine Blades ◽  
Wake Effect

This study analyzed the performance decline of wind turbine with age using the SCADA (Supervisory Control And Data Acquisition) data and the short-term in situ LiDAR (Light Detection and Ranging) measurements taken at the Shinan wind farm located on the coast of Bigeumdo Island in the southwestern sea of South Korea. Existing methods have generally attempted to estimate performance aging through long-term trend analysis of a normalized capacity factor in which wind speed variability is calibrated. However, this study proposes a new method using SCADA data for wind farms whose total operation period is short (less than a decade). That is, the trend of power output deficit between predicted and actual power generation was analyzed in order to estimate performance aging, wherein a theoretically predicted level of power generation was calculated by substituting a free stream wind speed projecting to a wind turbine into its power curve. To calibrate a distorted wind speed measurement in a nacelle anemometer caused by the wake effect resulting from the rotation of wind-turbine blades and the shape of the nacelle, the free stream wind speed was measured using LiDAR remote sensing as the reference data; and the nacelle transfer function, which converts nacelle wind speed into free stream wind speed, was derived. A four-year analysis of the Shinan wind farm showed that the rate of performance aging of the wind turbines was estimated to be −0.52%p/year.

The Equivalent Method of Wind Farms Considering Wake Effect

2013 ◽  
Vol 860-863 ◽  
pp. 237-241
Author(s):  
Jing Ru Yan ◽  
Jin Yao Zhu ◽  
Xue Bing Zheng ◽  
Ran Li
Keyword(s):  
Wind Speed ◽  
Energy Loss ◽  
Wind Turbine ◽  
Wind Farm ◽  
Wind Farms ◽  
Output Characteristic ◽  
Wake Effect ◽  
Speed Distribution ◽  
Wind Speed Distribution ◽  
Equivalent Method

It analyses the model of wake effect of wind farm in detail. Considering the energy loss caused by wake effect on the wind speed of wind turbine in different locations, the output of whole wind farm can be evaluated via the model, including the wind speed distribution. Then, it determines a kind of equivalent method of wind farm based on the output characteristic of the port of wind farm.

scholarly journals A Binary Integer Programming Method for Optimal Wind Turbines Allocation

2021 ◽  
Vol 3 (2) ◽  
pp. 462-473
Author(s):  
Nikolaos M. Manousakis ◽  
Constantinos S. Psomopoulos ◽  
George Ch. Ioannidis ◽  
Stavros D. Kaminaris
Keyword(s):  
Integer Programming ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Turbine Blades ◽  
Wind Turbine Blades ◽  
Binary Integer Programming ◽  
Wake Effect ◽  
Square Cells ◽  
Virtual Grid

The present study introduces a Binary Integer Programming (BIP) method to minimize the number of wind turbines needed to be installed in a wind farm. The locations of wind turbines are selected in a virtual grid which is constructed considering a minimum distance between the wind turbines to avoid the wake effect. Additional equality constraints are also included to the proposed formulation to prohibit or enforce the installation of wind turbines placement at specific locations of the wind farmland. Moreover, a microscopic wind turbine placement considering the local air density is studied. To verify the efficiency of this proposal, a square site was subdivided into 25 square cells providing a virtual grid with 36 candidate placement locations. Moreover, a virtual grid with 121 vertices related with a Greek island is also tested. All simulations conducted considering the area of geographical territory, the length of wind turbine blades, as well as the capacity of each turbine.

Statistical calculation of thrust curve of a wind turbine based on available power curve and general specifications data

2021 ◽  
Author(s):  
Evgeny Atlaskin ◽  
Irene Suomi ◽  
Anders Lindfors
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Farm ◽  
Wind Farms ◽  
Power Curve ◽  
Wake Effect ◽  
Thrust Coefficient ◽  
Simple Method ◽  
Wind Speeds ◽  
Power Curves

<p>Power curves for a substantial number of wind turbine generators (WTG) became available in a number of public sources during the recent years. They can be used to estimate the power production of a wind farm fleet with uncertainty determined by the accuracy and consistency of the power curve data. However, in order to estimate power losses inside a wind farm due to wind speed reduction caused by the wake effect, information on the thrust force, or widely used thrust coefficient (Ct), is required. Unlike power curves, Ct curves for the whole range of operating wind speeds of a WTG are still scarcely available in open sources. Typically, power and Ct curves are requested from a WTG manufacturer or wind farm owner under a non-disclosure agreement. However, in a research study or in calculations over a multitude of wind farms with a variety of wind turbine models, collecting this information from owners may be hardly possible. This study represents a simple method to define Ct curve statistically using power curve and general specifications of WTGs available in open sources. Preliminary results demonstrate reasonable correspondence between simulated and given data. The estimations are done in the context of aggregated wind power calculations based on reanalysis or forecast data, so that the uncertainty of wake wind speed caused by the uncertainty of predicted Ct is comparable, or do not exceed, the uncertainty of given wind speed. Although the method may not provide accurate fits at low wind speeds, it represents an essential alternative to using physical Computational Fluid Dynamics (CFD) models that are both more demanding to computer resources and require detailed information on the geometry of the rotor blades and physical properties of the rotor, which are even more unavailable in open sources than power curves.</p>

Modeling Large-Scale Wind Farms for Reliability Analysis Considering Wake Effect

2014 ◽  
Vol 543-547 ◽  
pp. 647-652
Author(s):  
Ye Zhou Hu ◽  
Lin Zhang ◽  
Pai Liu ◽  
Xin Yuan Liu ◽  
Ming Zhou
Keyword(s):  
Power Generation ◽  
Wind Speed ◽  
Wind Power ◽  
Large Scale ◽  
Wind Farm ◽  
Wind Farms ◽  
Wind Power Generation ◽  
Wake Effect ◽  
Effect Model ◽  
The Individual

Large scale wind power penetration has a significant impact on the reliability of the electric generation systems. A wind farm consists of a large number of wind turbine generators (WTGs). A major difficulty in modeling wind farms is that the WTG not have an independent capacity distribution due to the dependence of the individual turbine output on the same energy source, the wind. In this paper, a model of the wind farm output power considering multi-wake effects is established according to the probability distribution of the wind speed and the characteristic of the wind generator output power: based on the simple Jenson wake effect model, the wake effect with wind speed sheer model and the detail wake effect model with the detail shade areas of the upstream wind turbines are discussed respectively. Compared to the individual wake effect model, this model takes the wind farm as a whole and considers the multi-wakes effect on the same unit. As a result the loss of the velocity inside the wind farm is considered more exactly. Furthermore, considering the features of sequentially and self-correlation of wind speed, an auto-regressive and moving average (ARMA) model for wind speed is built up. Also the reliability model of wind farm is built when the output characteristics of wind power generation units, correlation of wind speeds among different wind farms, outage model of wind power generation units, wake effect of wind farm and air temperature are considered. Simulation results validate the effectiveness of the proposed models. These models can be used to research the reliability of power grid containing wind farms, wind farm capacity credit as well as the interconnection among wind farms

scholarly journals A Comparison of Edge Detectors in the Framework of Wake Pattern Modeling for Wind Turbines

2020 ◽  
Vol 6 (2) ◽  
Author(s):  
Yanjun Yan ◽  
James Z. Zhang ◽  
Hayrettin Bora Karayaka
Keyword(s):  
Power Generation ◽  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Linear Prediction ◽  
Edge Detector ◽  
Wake Effect ◽  
Edge Detectors ◽  
The Individual

To monitor wind turbine health, wind farm operators can take advantage of the historical SCADA (supervisory control and data acquisition) data to generate the wake pattern beforehandfor each wind turbine, and then decide in real time whether observed reduction in power generation is due to wake or true faults. In our earlier efforts, we proposed an effective wakepattern modeling approach based on edge detector using Linear Prediction (LP) with entropy-thresholding, and smoothing using Empirical Mode Decomposition (EMD) on the windspeed difference plots. In this paper, we compare the LP based edge detector with two other predominant edge detectors, Sobel and Canny edge detectors, to quantitatively justifythe appropriateness and effectiveness of the LP based edge detector in wind turbine wake pattern analysis. We generate a fused wake model for the turbine of interest with multiple neighboring turbines, and then analyze the wake effect on turbine power generation. With a fused wake pattern, we do not need to identify the individual source of wake any more. Weexpect that wakes cause reduced wind speed and hence reduced power generation, but we have also observed from the SCADA data that the wind turbines in wake zones tend to overreact when the wind speed is not yet close to the highwind- shut-down threshold, which causes further power generation loss.

Evaluation of the influence of wind speed and angle of attack on the aerodynamic effect of wind turbine blades

2017 ◽  
Author(s):  
Salete Alves ◽  
Luiz Guilherme Vieira Meira de Souza ◽  
Edália Azevedo de Faria ◽  
Maria Thereza dos Santos Silva ◽  
Ranaildo Silva
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Angle Of Attack ◽  
Wind Turbine Blades ◽  
Aerodynamic Effect

scholarly journals Performance Enhancement of Proposed Namaacha Wind Farm by Minimising Losses Due to the Wake Effect: A Mozambican Case Study

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4291
Author(s):  
Paxis Marques João Roque ◽  
Shyama Pada Chowdhury ◽  
Zhongjie Huan
Keyword(s):  
Wind Speed ◽  
Wind Power ◽  
Wind Turbines ◽  
Power Output ◽  
Wind Farm ◽  
Wind Farms ◽  
Operating Conditions ◽  
Wake Effect ◽  
Wind Generators ◽  
Wind Potential

District of Namaacha in Maputo Province of Mozambique presents a high wind potential, with an average wind speed of around 7.5 m/s and huge open fields that are favourable to the installation of wind farms. However, in order to make better use of the wind potential, it is necessary to evaluate the operating conditions of the turbines and guide the independent power producers (IPPs) on how to efficiently use wind power. The investigation of the wind farm operating conditions is justified by the fact that the implementation of wind power systems is quite expensive, and therefore, it is imperative to find alternatives to reduce power losses and improve energy production. Taking into account the power needs in Mozambique, this project applied hybrid optimisation of multiple energy resources (HOMER) to size the capacity of the wind farm and the number of turbines that guarantee an adequate supply of power. Moreover, considering the topographic conditions of the site and the operational parameters of the turbines, the system advisor model (SAM) was applied to evaluate the performance of the Vestas V82-1.65 horizontal axis turbines and the system’s power output as a result of the wake effect. For any wind farm, it is evident that wind turbines’ wake effects significantly reduce the performance of wind farms. The paper seeks to design and examine the proper layout for practical placements of wind generators. Firstly, a survey on the Namaacha’s electricity demand was carried out in order to obtain the district’s daily load profile required to size the wind farm’s capacity. Secondly, with the previous knowledge that the operation of wind farms is affected by wake losses, different wake effect models applied by SAM were examined and the Eddy–Viscosity model was selected to perform the analysis. Three distinct layouts result from SAM optimisation, and the best one is recommended for wind turbines installation for maximising wind to energy generation. Although it is understood that the wake effect occurs on any wind farm, it is observed that wake losses can be minimised through the proper design of the wind generators’ placement layout. Therefore, any wind farm project should, from its layout, examine the optimal wind farm arrangement, which will depend on the wind speed, wind direction, turbine hub height, and other topographical characteristics of the area. In that context, considering the topographic and climate features of Mozambique, the study brings novelty in the way wind farms should be placed in the district and wake losses minimised. The study is based on a real assumption that the project can be implemented in the district, and thus, considering the wind farm’s capacity, the district’s energy needs could be met. The optimal transversal and longitudinal distances between turbines recommended are 8Do and 10Do, respectively, arranged according to layout 1, with wake losses of about 1.7%, land utilisation of about 6.46 Km2, and power output estimated at 71.844 GWh per year.

Machine Learning Aided Prediction of Rain Erosion Damage on Wind Turbine Blade Sections

2021 ◽  
Author(s):  
Alessio Castorrini ◽  
Paolo Venturini ◽  
Fabrizio Gerboni ◽  
Alessandro Corsini ◽  
Franco Rispoli
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Energy Production ◽  
Turbine Blades ◽  
Wind Farms ◽  
Wind Turbine Blade ◽  
Wind Turbine Blades ◽  
Coating Materials ◽  
Erosion Modelling ◽  
Rain Erosion

Abstract Rain erosion of wind turbine blades represents an interesting topic of study due to its non-negligible impact on annual energy production of the wind farms installed in rainy sites. A considerable amount of recent research works has been oriented to this subject, proposing rain erosion modelling, performance losses prediction, structural issues studies, etc. This work aims to present a new method to predict the damage on a wind turbine blade. The method is applied here to study the effect of different rain conditions and blade coating materials, on the damage produced by the rain over a representative section of a reference 5MW turbine blade operating in normal turbulence wind conditions.

Optimization of Aerodynamic Performance of Wind Turbine Blades

2013 ◽  
Vol 284-287 ◽  
pp. 518-522
Author(s):  
Hua Wei Chi ◽  
Pey Shey Wu ◽  
Kami Ru Chen ◽  
Yue Hua Jhuo ◽  
Hung Yun Wu
Keyword(s):  
Power Generation ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Three Dimensional ◽  
Aerodynamic Performance ◽  
Wind Power Generation ◽  
Generation System ◽  
Wind Turbine Blades ◽  
Rotor Design ◽  
Power Generation System

A wind-power generation system uses wind turbine blades to convert the kinetic energy of wind to drive a generator which in turn yields electricity, the aerodynamic performance of the wind turbine blades has decisive effect on the cost benefit of the whole system. The aerodynamic analysis and the optimization of design parameters for the wind turbine blades are key techniques in the early stage of the development of a wind-power generation system. It influences the size selection of connecting mechanisms and the specification of parts in the design steps that follows. A computational procedure and method for aerodynamics optimization was established in this study for three-dimensional blades and the rotor design of a wind turbine. The procedure was applied to improving a previously studied 25kW wind turbine rotor design. Results show that the aerodynamic performance of the new three-dimensional blades has remarkable improvement after optimization.

Sign in / Sign up

Export Citation Format

Share Document