scholarly journals Effects of Sulfate and Sulfuric Acid on Efficiency of Geopolymers as Concrete Repair Materials

Gels ◽  
2022 ◽  
Vol 8 (1) ◽  
pp. 53
Author(s):  
Rayed Alyousef ◽  
Ahmed Abdel Khalek Ebid ◽  
Ghasan Fahim Huseien ◽  
Hossein Mohammadhosseini ◽  
Hisham Alabduljabbar ◽  
...  
Keyword(s):  
Sulfuric Acid ◽  
Bond Strength ◽  
High Performance ◽  
Mechanical Performance ◽  
High Volume ◽  
Industrial Wastes ◽  
Ternary Blend ◽  
Ceramic Tiles ◽  
Strength Performance ◽  
Durability Performance

Various geopolymer mortars (GPMs) as concrete repairing materials have become effective owing to their eco-friendly properties. Geopolymer binders designed from agricultural and industrial wastes display interesting and useful mechanical performance. Based on this fact, this research (experimental) focuses on the feasibility of achieving a new GPM with improved mechanical properties and enhanced durability performance against the aggressive sulfuric acid and sulfate attacks. This new ternary blend of GPMs can be achieved by combining waste ceramic tiles (WCT), fly ash (FA) and ground blast furnace slag (GBFS) with appropriate proportions. These GPMs were designed from a high volume of WCT, FA, and GBFS to repair the damaged concretes existing in the construction sectors. Flexural strength, slant shear bond strength, and compatibility of the obtained GPMs were compared with the base or normal concrete (NC) before and after exposure to the aggressive environments. Tests including flexural four-point loading and thermal expansion coefficient were performed. These GPMs were prepared using a low concentration of alkaline activator solution with increasing levels of GBFS and FA replaced by WCT. The results showed that substitution of GBFS and FA by WCT in the GPMs could enhance their bond strength, mechanical characteristics, and durability performance when exposed to aggressive environments. In addition, with the increase in WCT contents from 50 to 70%, the bond strength performance of the GPMs was considerably enhanced under sulfuric acid and sulfate attack. The achieved GPMs were shown to be highly compatible with the concrete substrate and excellent binders for various civil engineering construction applications. It is affirmed that the proposed GPMs can efficiently be used as high-performance materials to repair damaged concrete surfaces.

Research on the Acid Fastness of Polyphenylene Sulfide Fiber

2011 ◽  
Vol 332-334 ◽  
pp. 281-285
Author(s):  
Xiu Hua Wang ◽  
Yan Fen Qin ◽  
Ji Xian Wan ◽  
Shao Bo Li ◽  
Yong Zhan ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Sulfuric Acid ◽  
Nitric Acid ◽  
High Performance ◽  
Mechanical Performance ◽  
Polyphenylene Sulfide ◽  
Treated Sample ◽  
High Performance Fiber ◽  
Infrared Spectrometer ◽  
Scanning Electron

Polyphenylene sulfide (PPS) fiber is a kind of high-performance fiber. This paper aimed at investigating the acid resistant performance of PPS fiber. The corrosive action of PPS fiber in nitric acid (HNO3), sulfuric acid (H2SO4), hydrochloric acid (HCl), the mixture of HNO3 and HCl, the mixture of HNO3 and H2SO4, the mixture of HNO3, H2SO4 and HCl were researched. In addition, the influence of various acid concentrations on the performances of the PPS fiber was also studied in the paper. The acid-treated sample was analyzed by the fiber tensile instrument, the Fourier infrared spectrometer, and the scanning electron microscope (SEM) to observe the change of mechanical performance, configuration and appearance.

Durability performance of fibrous high-performance cementitious composites under sulfuric acid attack

2021 ◽  
Vol 21 (4) ◽  
Author(s):  
Kasım Mermerdaş ◽  
Süleyman İpek ◽  
Ahmed Motesem Anwer ◽  
Şevin Ekmen ◽  
Mustafa Özen
Keyword(s):  
Sulfuric Acid ◽  
High Performance ◽  
Cementitious Composites ◽  
Acid Attack ◽  
Durability Performance

scholarly journals Preparation of Green Low Strength Mixture for Foundation Reinforcement Treatment by Using Fly Ash and Waste Coal Gangue

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 664 ◽  
Author(s):  
Linhao Li ◽  
Guangcheng Long ◽  
Kunlin Ma ◽  
Hongwei Ma ◽  
Wenbing Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
Acid Resistance ◽  
High Volume ◽  
Waste Recycling ◽  
Coal Gangue ◽  
Dynamic Shear Modulus ◽  
Durability Performance

Effective foundation reinforcement treatment is essential for modern large and complex infrastructure, while it is significant for developing new green high-performance materials for foundation reinforcement. This study investigates a new green concrete by using high volume fly-ash and coal gangue aggregates, which is expected to apply for foundation treatment of modern infrastructure with high loading-bear ability. In this experiment, 12 mix proportions of fly ash coal gangue mixture (the material name, abbreviated FGM) were designed, and its mechanical properties and durability performance were investigated. The mechanical properties of FGM include compressive strength, dynamic elastic modulus, dynamic shear modulus, Poisson’s ratio, and the stress–strain behaviors. The durability performance was evaluated by the parameters of acid resistance, which simulated an acid circumstance. After that, the environmental effects about carbon emission of this material were also investigated. Results show that the FGM with 84.6% wastes utilizing rate is a cost-effective material for foundation reinforcing treatment. Its compressive strength at 28 days and 60 days can reach more than 8 MPa and 10 MPa, respectively. After being immersed in the acid environment for 140 days, the mass loss (%) of the material could be under 3.5%. The greenness shows that the e-CO2 indices of FGM are lower than 20 kg/MPa·m3, and the e-energy indices are at below 150 MJ/MPa·m3. FGM has the advantages of acid resistance, waste recycling, and lower carbon emissions than the previous methods for foundation improvement.

scholarly journals Bioinspired Engineering towards Tailoring Advanced Lignin/Rubber Elastomers

Polymers ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 1033 ◽  
Author(s):  
Haixu Wang ◽  
Weifeng Liu ◽  
Jinhao Huang ◽  
Dongjie Yang ◽  
Xueqing Qiu
Keyword(s):  
High Performance ◽  
Mechanical Performance ◽  
Value Added ◽  
High Volume ◽  
Enhancement Effect ◽  
Covalent Bonds ◽  
Dynamic Coordination ◽  
Natural Ligands ◽  
Coordination Bonds

The pursuit of high volume and high value-added applications for lignin has been a long-term challenge. In this work, inspired by the energy sacrificial mechanism from biological materials, we developed high-performance lignin/carbon black (CB)/nitrile rubber (NBR) elastomers by constructing a dual-crosslinking network consisting of sulfur covalent bonds and dynamic coordination sacrificial bonds. Lignin was not only used for the substitution of half mass of CB in the NBR elastomer but also served as natural ligands for the Zn-based coordination bonds, providing a significant synergistic coordination enhancement effect. The mechanical performance of the elastomers can be easily manipulated by adjusting the proportion of non-permanent coordination bonds and permanent covalent bonds. Lignin/CB/NBR elastomers with a higher strength and modulus than CB-filled elastomers were obtained while maintaining excellent elasticity. The thermal stability and the high-temperature oil resistance of NBR elastomers were also improved by incorporation of lignin and metal coordination bonds. Overall, this work inspires a new solution for the design of high-performance lignin/rubber elastomers with a high lignin loading content.

scholarly journals Polymer/Iron-Based Layered Double Hydroxides as Multifunctional Wound Dressings

Pharmaceutics ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 1130
Author(s):  
Mariana Pires Figueiredo ◽  
Ana Borrego-Sánchez ◽  
Fátima García-Villén ◽  
Dalila Miele ◽  
Silvia Rossi ◽  
...  
Keyword(s):  
Drug Release ◽  
High Performance ◽  
Mechanical Performance ◽  
Release Kinetics ◽  
Wound Dressings ◽  
In Vitro Drug Release ◽  
Improved Performance ◽  
Double Hydroxide ◽  
Double Hydroxides

This work presents the development of multifunctional therapeutic membranes based on a high-performance block copolymer scaffold formed by polyether (PE) and polyamide (PA) units (known as PEBA) and layered double hydroxide (LDH) biomaterials, with the aim to study their uses as wound dressings. Two LDH layer compositions were employed containing Mg2+ or Zn2+, Fe3+ and Al3+ cations, intercalated with chloride anions, abbreviated as Mg-Cl or Zn-Cl, or intercalated with naproxenate (NAP) anions, abbreviated as Mg-NAP or Zn-NAP. Membranes were structurally and physically characterized, and the in vitro drug release kinetics and cytotoxicity assessed. PEBA-loading NaNAP salt particles were also prepared for comparison. Intercalated NAP anions improved LDH–polymer interaction, resulting in membranes with greater mechanical performance compared to the polymer only or to the membranes containing the Cl-LDHs. Drug release (in saline solution) was sustained for at least 8 h for all samples and release kinetics could be modulated: a slower, an intermediate and a faster NAP release were observed from membranes containing Zn-NAP, NaNAP and Mg-NAP particles, respectively. In general, cell viability was higher in the presence of Mg-LDH and the membranes presented improved performance in comparison with the powdered samples. PEBA containing Mg-NAP sample stood out among all membranes in all the evaluated aspects, thus being considered a great candidate for application as multifunctional therapeutic dressings.

scholarly journals Study of the Physical Behavior of a New Composite Material Based on Fly Ash from the Combustion of Coal in an Ultra-Supercritical Thermal Power Plant

2021 ◽  
Vol 5 (6) ◽  
pp. 151
Author(s):  
Mustapha El Kanzaoui ◽  
Chouaib Ennawaoui ◽  
Saleh Eladaoui ◽  
Abdelowahed Hajjaji ◽  
Abdellah Guenbour ◽  
...  
Keyword(s):  
Composite Material ◽  
Fly Ash ◽  
Power Plant ◽  
High Performance ◽  
Thermal Power ◽  
Recovery Process ◽  
Industrial Wastes ◽  
Raw Material ◽  
Polymerization Reaction ◽  
High Performance Composite

Given the amount of industrial waste produced and collected in the world today, a recycling and recovery process is needed. The study carried out on this subject focuses on the valorization of one of these industrial wastes, namely the fly ash produced by an ultra-supercritical coal power plant. This paper describes the use and recovery of fly ash as a high percentage reinforcement for the development of a new high-performance composite material for use in various fields. The raw material, fly ash, comes from the staged combustion of coal, which occurs in the furnace of an ultra-supercritical boiler of a coal-fired power plant. Mechanical compression, thermal conductivity, and erosion tests are used to study the mechanical, thermal, and erosion behavior of this new composite material. The mineralogical and textural analyses of samples were characterized using Scanning Electron Microscopy (SEM). SEM confirmed the formation of a new composite by a polymerization reaction. The results obtained are very remarkable, with a high Young’s modulus and a criterion of insulation, which approves the presence of a potential to be exploited in the different fields of materials. In conclusion, the composite material presented in this study has great potential for building material and could represent interesting candidates for the smart city.

scholarly journals Hydrothermal Pretreatment of Wheat Straw: Effects of Temperature and Acidity on Byproduct Formation and Inhibition of Enzymatic Hydrolysis and Ethanolic Fermentation

Agronomy ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 487
Author(s):  
Dimitrios Ilanidis ◽  
Stefan Stagge ◽  
Leif J. Jönsson ◽  
Carlos Martín
Keyword(s):  
Mass Spectrometry ◽  
Sulfuric Acid ◽  
Wheat Straw ◽  
High Performance ◽  
Enzymatic Saccharification ◽  
Hydrothermal Pretreatment ◽  
Gas Chromatography Mass Spectrometry ◽  
Enzymatic Digestibility ◽  
Acid Catalyzed ◽  
Pretreatment Conditions

Biochemical conversion of wheat straw was investigated using hydrothermal pretreatment, enzymatic saccharification, and microbial fermentation. Pretreatment conditions that were compared included autocatalyzed hydrothermal pretreatment at 160, 175, 190, and 205 °C and sulfuric-acid-catalyzed hydrothermal pretreatment at 160 and 190 °C. The effects of using different pretreatment conditions were investigated with regard to (i) chemical composition and enzymatic digestibility of pretreated solids, (ii) carbohydrate composition of pretreatment liquids, (iii) inhibitory byproducts in pretreatment liquids, (iv) furfural in condensates, and (v) fermentability using yeast. The methods used included two-step analytical acid hydrolysis combined with high-performance anion-exchange chromatography (HPAEC), HPLC, ultra-high performance liquid chromatography-electrospray ionization-triple quadrupole-mass spectrometry (UHPLC-ESI-QqQ-MS), and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). Lignin recoveries in the range of 108–119% for autocatalyzed hydrothermal pretreatment at 205 °C and sulfuric-acid-catalyzed hydrothermal pretreatment were attributed to pseudolignin formation. Xylose concentration in the pretreatment liquid increased with temperature up to 190 °C and then decreased. Enzymatic digestibility was correlated with the removal of hemicelluloses, which was almost quantitative for the autocatalyzed hydrothermal pretreatment at 205 °C. Except for the pretreatment liquid from the autocatalyzed hydrothermal pretreatment at 205 °C, the inhibitory effects on Saccharomyces cerevisiae yeast were low. The highest combined yield of glucose and xylose was achieved for autocatalyzed hydrothermal pretreatment at 190 °C and the subsequent enzymatic saccharification that resulted in approximately 480 kg/ton (dry weight) raw wheat straw.

scholarly journals Durability Study on High-Performance Fiber-Reinforced Mortar under Simulated Wastewater Pipeline Environment

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3781
Author(s):  
Tianyu Wang ◽  
Yahong Zhao ◽  
Baosong Ma ◽  
Cong Zeng
Keyword(s):  
Mass Loss ◽  
Pore Volume ◽  
High Performance ◽  
Mechanical Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Economic Losses ◽  
Structural Deterioration ◽  
Simulated Wastewater ◽  
Corrosive Environments

The acid–alkaline-inducd corrosive environments inside wastewater concrete pipelines cause concrete structural deterioration and substantial economic losses all over the world. High-performance concrete/mortar (HPC) was designed to have better resistance to corrosive environments, with enhanced service life. However, the durability of HPC in wastewater pipeline environments has rarely been studied. A high-performance mortar mixture (M) reinforced by supplemental materials (including fly ash and silica fume) and polyvinyl alcohol (PVA) fibers, together with a mortar mixture (P) consisting of cement, sand and water with similar mechanical performance, were both designed and exposed to simulated wastewater pipeline environments. The visual appearance, dimensional variation, mass loss, mechanical properties, permeable pore volume, and microstructure of the specimens were measured during the corrosion cycles. More severe deterioration was observed when the alkaline environment was introduced into the corrosion cycles. Test results showed that the M specimens had less permeable pore volume, better dimensional stability, and denser microstructure than the P specimens under acid–alkaline-induced corrosive environments. The mass-loss rates of the M specimens were 66.1–77.2% of the P specimens after 12 corrosion cycles. The compressive strength of the M specimens was 25.5–37.3% higher than the P specimens after 12 cycles under corrosive environments. Hence, the high-performance mortar examined in this study was considered superior to traditional cementitious materials for wastewater pipeline construction and rehabilitation.

Sign in / Sign up

Export Citation Format

Share Document