scholarly journals Adipose-Derived Mesenchymal Stem Cell Chondrospheroids Cultured in Hypoxia and a 3D Porous Chitosan/Chitin Nanocrystal Scaffold as a Platform for Cartilage Tissue Engineering

2020 ◽  
Vol 21 (3) ◽  
pp. 1004 ◽  
Author(s):  
Veronica Zubillaga ◽  
Ana Alonso-Varona ◽  
Susana C. M. Fernandes ◽  
Asier M. Salaberria ◽  
Teodoro Palomares
Keyword(s):  
Tissue Engineering ◽  
Articular Cartilage ◽  
Collagen Type ◽  
Porous Scaffold ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Type I ◽  
Low Oxygen ◽  
Porous Chitosan

Articular cartilage degeneration is one of the most common causes of pain and disability in middle-aged and older people. Tissue engineering (TE) has shown great therapeutic promise for this condition. The design of cartilage regeneration constructs must take into account the specific characteristics of the cartilaginous matrix, as well as the avascular nature of cartilage and its cells’ peculiar arrangement in isogenic groups. Keeping these factors in mind, we have designed a 3D porous scaffold based on genipin-crosslinked chitosan/chitin nanocrystals for spheroid chondral differentiation of human adipose tissue-derived mesenchymal stem cells (hASCs) induced in hypoxic conditions. First, we demonstrated that, under low oxygen conditions, the chondrospheroids obtained express cartilage-specific markers including collagen type II (COL2A1) and aggrecan, lacking expression of osteogenic differentiation marker collagen type I (COL1A2). These results were associated with an increased expression of hypoxia-inducible factor 1α, which positively directs COL2A1 and aggrecan expression. Finally, we determined the most suitable chondrogenic differentiation pattern when hASC spheroids were seeded in the 3D porous scaffold under hypoxia and obtained a chondral extracellular matrix with a high sulphated glycosaminoglycan content, which is characteristic of articular cartilage. These findings highlight the potential use of such templates in cartilage tissue engineering.

scholarly journals Characterization of Collagen Type I and II Blended Hydrogels for Articular Cartilage Tissue Engineering

2016 ◽  
Vol 17 (10) ◽  
pp. 3145-3152 ◽  
Author(s):  
Nelda Vázquez-Portalatı́n ◽  
Claire E. Kilmer ◽  
Alyssa Panitch ◽  
Julie C. Liu
Keyword(s):  
Tissue Engineering ◽  
Articular Cartilage ◽  
Collagen Type ◽  
Cartilage Tissue Engineering ◽  
Collagen Type I ◽  
Cartilage Tissue ◽  
Type I

scholarly journals Cartilage Tissue Engineering Approaches Need to Assess Fibrocartilage When Hydrogel Constructs Are Mechanically Loaded

2022 ◽  
Vol 9 ◽  
Author(s):  
Hamed Alizadeh Sardroud ◽  
Tasker Wanlin ◽  
Xiongbiao Chen ◽  
B. Frank Eames
Keyword(s):  
Tissue Engineering ◽  
Collagen Type ◽  
Hyaline Cartilage ◽  
Imaging Techniques ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Type I

Chondrocytes that are impregnated within hydrogel constructs sense applied mechanical force and can respond by expressing collagens, which are deposited into the extracellular matrix (ECM). The intention of most cartilage tissue engineering is to form hyaline cartilage, but if mechanical stimulation pushes the ratio of collagen type I (Col1) to collagen type II (Col2) in the ECM too high, then fibrocartilage can form instead. With a focus on Col1 and Col2 expression, the first part of this article reviews the latest studies on hyaline cartilage regeneration within hydrogel constructs that are subjected to compression forces (one of the major types of the forces within joints) in vitro. Since the mechanical loading conditions involving compression and other forces in joints are difficult to reproduce in vitro, implantation of hydrogel constructs in vivo is also reviewed, again with a focus on Col1 and Col2 production within the newly formed cartilage. Furthermore, mechanotransduction pathways that may be related to the expression of Col1 and Col2 within chondrocytes are reviewed and examined. Also, two recently-emerged, novel approaches of load-shielding and synchrotron radiation (SR)–based imaging techniques are discussed and highlighted for future applications to the regeneration of hyaline cartilage. Going forward, all cartilage tissue engineering experiments should assess thoroughly whether fibrocartilage or hyaline cartilage is formed.

scholarly journals The Application of Bioreactors for Cartilage Tissue Engineering: Advances, Limitations, and Future Perspectives

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Liwei Fu ◽  
Pinxue Li ◽  
Hao Li ◽  
Cangjian Gao ◽  
Zhen Yang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Cell Culture ◽  
Articular Cartilage ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Future Perspectives ◽  
Mechanical Environment ◽  
Biomechanical Stimuli ◽  
Articular Cartilage Regeneration

Tissue engineering (TE) has brought new hope for articular cartilage regeneration, as TE can provide structural and functional substitutes for native tissues. The basic elements of TE involve scaffolds, seeded cells, and biochemical and biomechanical stimuli. However, there are some limitations of TE; what most important is that static cell culture on scaffolds cannot simulate the physiological environment required for the development of natural cartilage. Recently, bioreactors have been used to simulate the physical and mechanical environment during the development of articular cartilage. This review aims to provide an overview of the concepts, categories, and applications of bioreactors for cartilage TE with emphasis on the design of various bioreactor systems.

scholarly journals Harnessing Biomechanics to Develop Cartilage Regeneration Strategies

2015 ◽  
Vol 137 (2) ◽  
Author(s):  
Kyriacos A. Athanasiou ◽  
Donald J. Responte ◽  
Wendy E. Brown ◽  
Jerry C. Hu
Keyword(s):  
Tissue Engineering ◽  
Articular Cartilage ◽  
Biochemical Characterization ◽  
Articular Chondrocytes ◽  
Lysyl Oxidase ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Main Function ◽  
Mechanical Stimuli

As this review was prepared specifically for the American Society of Mechanical Engineers H.R. Lissner Medal, it primarily discusses work toward cartilage regeneration performed in Dr. Kyriacos A. Athanasiou's laboratory over the past 25 years. The prevalence and severity of degeneration of articular cartilage, a tissue whose main function is largely biomechanical, have motivated the development of cartilage tissue engineering approaches informed by biomechanics. This article provides a review of important steps toward regeneration of articular cartilage with suitable biomechanical properties. As a first step, biomechanical and biochemical characterization studies at the tissue level were used to provide design criteria for engineering neotissues. Extending this work to the single cell and subcellular levels has helped to develop biochemical and mechanical stimuli for tissue engineering studies. This strong mechanobiological foundation guided studies on regenerating hyaline articular cartilage, the knee meniscus, and temporomandibular joint (TMJ) fibrocartilage. Initial tissue engineering efforts centered on developing biodegradable scaffolds for cartilage regeneration. After many years of studying scaffold-based cartilage engineering, scaffoldless approaches were developed to address deficiencies of scaffold-based systems, resulting in the self-assembling process. This process was further improved by employing exogenous stimuli, such as hydrostatic pressure, growth factors, and matrix-modifying and catabolic agents, both singly and in synergistic combination to enhance neocartilage functional properties. Due to the high cell needs for tissue engineering and the limited supply of native articular chondrocytes, costochondral cells are emerging as a suitable cell source. Looking forward, additional cell sources are investigated to render these technologies more translatable. For example, dermis isolated adult stem (DIAS) cells show potential as a source of chondrogenic cells. The challenging problem of enhanced integration of engineered cartilage with native cartilage is approached with both familiar and novel methods, such as lysyl oxidase (LOX). These diverse tissue engineering strategies all aim to build upon thorough biomechanical characterizations to produce functional neotissue that ultimately will help combat the pressing problem of cartilage degeneration. As our prior research is reviewed, we look to establish new pathways to comprehensively and effectively address the complex problems of musculoskeletal cartilage regeneration.

scholarly journals Articular cartilage tissue engineering with stem cells implanted onto nanoscaffolds and platelet-rich plasma

2017 ◽  
Vol 3 (3) ◽  
pp. 322
Author(s):  
Hadeer A. Abbassy ◽  
Laila M. Montaser ◽  
Sherin M. Fawzy
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Articular Cartilage ◽  
Soft Tissues ◽  
Platelet Rich Plasma ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Cartilage Defects ◽  
Great Promise

<p class="abstract">Musculoskeletal medicine targets both cartilage regeneration and healing of soft tissues. Articular cartilage repair and regeneration is primarily considered to be due to its poor regenerative properties. Cartilage defects due to joint injury, aging, or osteoarthritis have low self-repair ability thus they are most often irreversible as well as being a major cause of joint pain and chronic disability. Unfortunately, current methods do not seamlessly restore hyaline cartilage and may lead to the formation of fibro- or continue hypertrophic cartilage. Deficiency of efficient modalities of therapy has invited research to combine stem cells, scaffold materials and environmental factors through tissue engineering. Articular cartilage tissue engineering aims to repair, regenerate, and hence improve the function of injured or diseased cartilage. This holds great potential and has evoked intense interest in improving cartilage therapy. Platelet-rich plasma (PRP) and/or stem cells may be influential for tissue repair as well as cartilage regenerative processes.  A great promise to advance current cartilage therapies toward achieving a consistently successful modality has been held for addressing cartilage afflictions. The use of stem cells, novel biologically inspired scaffolds and, emerging nanotechnology may be the best way to reach this objective via tissue engineering. A current and emergent approach in the field of cartilage tissue engineering is explained in this review for specific application. In the future, the development of new strategies using stem cells seeded in scaffolds and the culture medium supplemented with growth factors could improve the quality of the newly formed cartilage<span lang="EN-IN">.</span></p>

scholarly journals Interstitial flow upregulates matrix synthesis and attenuates NF-kB signaling in a novel perfusion bioreactor for articular cartilage tissue engineering

2021 ◽  
Author(s):  
Haneen Abusharkh ◽  
Terreill Robertson ◽  
Juana Mendenhall ◽  
Bulent Gozen ◽  
Edwin Tingstad ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Articular Cartilage ◽  
Cell Viability ◽  
Fold Increase ◽  
Cartilage Tissue ◽  
Type I ◽  
Interstitial Flow ◽  
Perfusion System ◽  
Matrix Synthesis ◽  
Porous Chitosan

The present study is focused on designing an easy-to-use novel perfusion system for articular cartilage (AC) tissue engineering and using it to elucidate the mechanism by which interstitial shear upregulates matrix synthesis by articular chondrocytes (AChs). Porous chitosan-agarose (CHAG) scaffolds were synthesized, freeze-dried, and compared to bulk agarose (AG) scaffolds. Both scaffold types were seeded with osteoarthritic human AChs and cultured in a novel perfusion system for one week with a shear-inducing medium flow velocity of 0.33 mm/s corresponding to an average surficial shear of 0.4 mPa and a CHAG interstitial shear of 40 mPa. While there were no statistical differences in cell viability for perfusion vs. static cultures for either scaffold type, CHAG scaffold cultures exhibited 3.3-fold higher (p<0.005) cell viability compared to AG scaffold cultures. Effects of combined superficial and interstitial perfusion for CHAG showed 150- and 45-fold (p<0.0001) increases in total collagen (COL) and 13- and 2.2-fold (p<0.001) increases in glycosaminoglycans (GAGs) over AG’s scaffold non-perfusion and perfusion cultures, respectively, and a 1.5-fold and 3.6-fold (p<0.005) increase over non-perfusion CHAG cultures. Contrasting CHAG perfusion and static cultures, chondrogenic gene comparisons showed a 3.5-fold increase in collagen type II/type I (COL2A1/COL1A1) mRNA ratio (p<0.05), and a 1.3-fold increase in aggrecan mRNA. Observed effects are suggested to be the result of inhibiting the inflammatory NF-κB signal transduction pathway as confirmed by a further study that indicated a reduction by 3.2-fold (p<0.05) upon exposure to perfusion. Our results demonstrate that the presence of pores plays a critical role in improving cell viability and that interstitial flow caused by medium perfusion through the porous scaffolds enhances the expression of chondrogenic genes and ECM components through the downregulation of NF-κB1.

scholarly journals Relevant Local Fatwā on The Issues of Using Human Tissues in Articular Cartilage Tissue Engineering Experimentation

2021 ◽  
Vol 20 (1) ◽  
Author(s):  
Muhammad Aa’zamuddin AR ◽  
Nur Syamimi MA ◽  
Abdurezak AH ◽  
Azhim A ◽  
Munirah S
Keyword(s):  
Tissue Engineering ◽  
Articular Cartilage ◽  
Biological Samples ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Joint Disease ◽  
Cartilage Tissue ◽  
Medical Procedure ◽  
Human Donor ◽  
Articular Cartilage Regeneration

In articular cartilage tissue engineering (ACTE) experimentation, the researchers have utilised cells and tissues sampled from the human donor for research purposes. The cells and tissues may be harvested from the living donor’s discarded tissues through a medical procedure, e.g. the total knee replacement surgery. The small pieces of a tissue sample taken from the human donor are essential to study the articular cartilage regeneration for treating joint disease, i.e. osteoarthritis. However, the procedure has raised some ethical and fiqh (Islamic jurisprudence) concerns. The study was done by utilising the secondary analysis of local Muslim jurists’ opinions (fatwā) related to the sampling of human biological samples. This paper explores the scenarios of using cell sources taken from the living human donor through the existing fatwā of local Muslim jurists (fuqahā`). The scenarios include: (1) taking samples from the living donor, and (2) discarding human tissue, as practised in ACTE experimentation. The current fatwā has shown that honouring every part of a human body is considered essential in Islam. ACTE researchers may utilise the biological samples from living donors as alternatives in studying articular cartilage regeneration. The donation of human biological samples for research purposes in ACTE experimentation, obtained from a medical procedure, may be permissible, should the stipulated terms and conditions were observed, and the procedure does not cause any additional harm to the donor.

scholarly journals Infrapatellar Fat Pads–Derived Stem Cell Is a Favorable Cell Source for Articular Cartilage Tissue Engineering: An In Vitro and Ex Vivo Study Based on 3D Organized Self-Assembled Biomimetic Scaffold

Cartilage ◽  
2021 ◽  
pp. 194760352098815
Author(s):  
Chen-Chie Wang ◽  
Ing-Ho Chen ◽  
Ya-Ting Yang ◽  
Yi-Ru Chen ◽  
Kai-Chiang Yang
Keyword(s):  
Tissue Engineering ◽  
Adipose Tissue ◽  
Collagen Type ◽  
Ex Vivo ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Type Ii ◽  
Collagen Type Ii ◽  
Fat Pads

Objective Adipose tissue–derived stem cells (ASCs) are a promising source of cells for articular cartilage regeneration. However, ASCs isolated from different adipose tissue depots have heterogeneous cell characterizations and differentiation potential when cultured in 3-dimensional (3D) niches. Design We compared the chondrogenicity of ASCs isolated from infrapatellar fat pads (IPFPs) and subcutaneous fat pads (SCFPs) in 3D gelatin-based biomimetic matrix. Results The IPFP-ASC-differentiated chondrocytes had higher ACAN, COL2A1, COL10, SOX6, SOX9, ChM-1, and MIA-3 mRNA levels and lower COL1A1 and VEGF levels than the SCFP-ASCs in 3D matrix. The difference in mRNA profile may have contributed to activation of the Akt, p38, RhoA, and JNK signaling pathways in the IPFP-ASCs. The chondrocytes differentiated from IPFP-ASCs had pronounced glycosaminoglycan and collagen type II production and a high chondroitin-6-sulfate/chondroitin-4-sulfate ratio with less polymerization of β-actin filaments. In an ex vivo mice model, magnetic resonance imaging revealed a shorter T2 relaxation time, indicating that more abundant extracellular matrix was secreted in the IPFP-ASC–matrix group. Histological examinations revealed that the IPFP-ASC matrix had higher chondrogenic efficacy of new cartilaginous tissue generation as evident in collagen type II and S-100 staining. Conclusion. ASCs isolated from IPFPs may be better candidates for cartilage regeneration, highlighting the translational potential of cartilage tissue engineering using the IPFP-ASC matrix technique.

Use of synovium-derived stromal cells and chitosan/collagen type I scaffolds for cartilage tissue engineering

2010 ◽  
Vol 5 (5) ◽  
pp. 055005 ◽  
Author(s):  
Zhongcheng Gong ◽  
Hui Xiong ◽  
Xing Long ◽  
Lili Wei ◽  
Jian Li ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stromal Cells ◽  
Collagen Type ◽  
Cartilage Tissue Engineering ◽  
Collagen Type I ◽  
Cartilage Tissue ◽  
Type I

scholarly journals Identifying the Potential of Qur’anic Recitation on the Proliferation of Chondrocytes Derived from Rabbit Articular Cartilage: Work in Progress

2018 ◽  
Vol 17 (1) ◽  
Author(s):  
Rosyafirah Hashim ◽  
Munirah Sha’ban ◽  
Sarah Rahmat ◽  
Zainul Ibrahim Zainuddin
Keyword(s):  
Tissue Engineering ◽  
Articular Cartilage ◽  
Profile Analysis ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
The Times ◽  
And Control ◽  
Rabbit Articular Cartilage

Introduction: In Islamic practice, the use of Qur’anic recitation in treatment can be traced back to the times of Prophet Muhammad (PBUH). This preliminary study aims to identify the potential of Qur’anic recitation of Surah Al-Fatihah on the proliferation of chondrocytes derived from rabbit articular cartilage. Cartilage tissue engineering offers an alternative way to facilitate cartilage regeneration in-vitro. Materials and Methods: The cellular model was established using a serially cultured and expanded chondrocytes in-vitro. The model was assigned into three groups. The first group was exposed to the Surah Al-Fatihah, recited 17 times based on the five times daily prayer unit (Raka’ah) obligated upon Muslims. The second group was exposed to an Arabic poem recitation. The third group was not exposed to any sound and served as the control. All groups were subjected to the growth profile analysis. The analysis was conducted at different passages starting from passage 0 to passage 3. Results: The results showed that the cells proliferation based on the growth kinetic analysis is higher for the cells exposed with Qur’anic recitation as compared to the Arabic poem and control groups. Conclusions: The proliferation process of the rabbit articular cartilage might be influenced with the use of Qur’anic recitation and as well as Arabic poem recitation. Exposure to the Western poem recitation and mute sound will be added for future study. It is hoped that this study could shed some light on the potential use of the Qur’anic recitation to facilitate cartilage regeneration in tissue engineering studies.

Sign in / Sign up

Export Citation Format

Share Document