scholarly journals Microstructural Evolution of a 3003 Based Aluminium Alloy during the CSET Process

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5770
Author(s):  
Orsolya Molnárová ◽  
Stanislav Habr ◽  
Esther de Prado ◽  
Jaroslav Čapek ◽  
Ondřej Ekrt ◽  
...  
Keyword(s):  
Aluminium Alloy ◽  
Electron Backscatter Diffraction ◽  
Microstructural Development ◽  
Initial Value ◽  
Fine Grained ◽  
Severe Plastic Deformation Technique ◽  
Angular Pressing ◽  
Transmission Electron ◽  
Metallic Cylinder ◽  
Backscatter Diffraction

A new severe plastic deformation technique, known as the complex shearing of extruded tube (CSET), was applied to a 3003 based model aluminium alloy. This technique, consisting of a combination of extrusion and two consecutive Equal Chanel Angular Pressing (ECAP) passes accompanied with concurrent torsional straining, is capable to produce a fine-grained tubular sample directly from a bulk metallic cylinder in one forming operation. In the present paper, the microstructural development of the alloy during partial processes of CSET was studied in detail using light microscopy, electron backscatter diffraction, and transmission electron microscopy. It was found that CSET technique refines the grain size down to 0.4 µm and, consequently, increases the microhardness from the initial value of 40 HV to the final value of 120 HV. The contributions of partial processes of CSET to the total strain were estimated.

scholarly journals The microstructure of meteoric ice from Vostok, Antarctica

2007 ◽  
Vol 53 (180) ◽  
pp. 41-62 ◽  
Author(s):  
Rachel Obbard ◽  
Ian Baker
Keyword(s):  
Electron Backscatter Diffraction ◽  
Impurity Content ◽  
Microstructural Development ◽  
Glacial Ice ◽  
Fine Grained ◽  
Grain Boundary Mobility ◽  
Coarse Grains ◽  
Vostok Station ◽  
Glacial Periods ◽  
Backscatter Diffraction

AbstractThe 3623 m long, 5G core collected at Vostok station, Antarctica, contains alternating layers of meteoric ice with two distinctly different microstructures. In this paper, we present the microstructure and impurity content of a number of specimens ranging in depth from 97 to 3416 m, describe in detail the characteristics of the different layers and propose a mechanism for their microstructural development. Digital image analysis, ion chromatography, scanning electron microscopy and energy dispersive X-ray spectroscopy were used to measure texture and the location and type of impurities; electron backscatter diffraction was used to determine crystal orientation. The ice associated with interglacial periods is characterized by relatively coarse grains and a strong preferred orientation of the c axes in a plane encompassing the coring direction, producing a vertical-girdle fabric. In contrast, ice from glacial periods is characterized by a much smaller grain size and a strong singlemaximum fabric, where the c axes are clustered around the vertical. Calcium is uniquely present in the grain boundaries of the fine-grained glacial layers, and its effect on grain-boundary mobility and the misorientation dependence of mobility can explain the development of the discontinuous microstructure seen in glacial ice at Vostok station.

Microstructure and Local Mechanical Properties of Cu-Co Alloys after Severe Plastic Deformation

2013 ◽  
Vol 586 ◽  
pp. 100-103 ◽  
Author(s):  
Jiří Buršík ◽  
Vilma Buršíková ◽  
Milan Svoboda ◽  
Petr Král ◽  
Jiří Dvořák ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Electron Backscatter Diffraction ◽  
Extrusion Direction ◽  
Ecap Processing ◽  
Angular Pressing ◽  
Transmission Electron ◽  
Ebsd Technique ◽  
Backscatter Diffraction ◽  
Pure Cu

Microstructure of Cu-2wt.%Co alloy after various heat treatment (and hence with various phase constitution) was studied after equal-channel angular pressing (ECAP) using transmission electron microscopy (TEM) and electron backscatter diffraction (EBSD) technique in a scanning electron microscope (SEM). We also focused on local mechanical properties measured across the section perpendicular to the ECAP extrusion direction. Starting from the grain size well above 1mm in the Cu-2wt.%Co solid solution, ECAP subsequently reduces grain size down to the submicron level. A comparison with pure Cu shows that the grain size homogenization is shifted towards higher number of ECAP passes. Fine dispersion of precipitates further slows down the grain refinement and grain size homogenization during ECAP processing. Local mechanical properties measured across the section perpendicular to the ECAP extrusion direction reveal systematic inhomogeneities of deformed microstructure caused by local gradients of temperature and pressure and by the processing geometry itself. This should be considered while characterizing the microstructure by a single EBSD measurement on a small selected area.

Effect of Annealing on Microstructural Development and Grain Orientation in Electrodeposited Ni

2010 ◽  
Vol 160 ◽  
pp. 235-240 ◽  
Author(s):  
Uta Klement ◽  
L. Hollang ◽  
S.R. Dey ◽  
M. Battabyal ◽  
O.V. Mishin ◽  
...  
Keyword(s):  
Grain Growth ◽  
Cross Sections ◽  
Electron Backscatter Diffraction ◽  
Microstructural Development ◽  
Growth Behaviour ◽  
Coalescence Model ◽  
Transmission Electron ◽  
Columnar Grains ◽  
Backscatter Diffraction

Thick (up to 5 mm) Ni electrodeposits were produced by the pulsed electrodeposition (PED) technique. The PED-Ni was investigated in planar and cross-sections using high resolution scanning electron microscopy. Grain size and local texture were studied by electron backscatter diffraction. Thermal stability and grain growth behaviour were investigated using in-situ annealing in the transmission electron microscope. It is observed that columnar grains are present in the material and that the orientation of grains is not uniform. Textures and in-situ annealing behaviour are compared to previous data on nanocrystalline PED-Ni and Ni-Fe, where a subgrain coalescence model adopted from recrystallization is used to describe the occurrence of abnormal grain growth upon annealing and where twinning was found to be responsible for the texture development.

scholarly journals The Effect of Annealing on the Microstructure and Properties of Ultralow-Temperature Rolled Mg–2Y–0.6Nd–0.6Zr Alloy

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 315
Author(s):  
Hongmin Yu ◽  
Wei Li ◽  
Yun Tan ◽  
Yuanbiao Tan
Keyword(s):  
Mechanical Properties ◽  
Electron Backscatter Diffraction ◽  
Rolling Process ◽  
Angular Pressing ◽  
Annealing Conditions ◽  
Ultralow Temperature ◽  
Transmission Electron ◽  
Ultralow Temperatures ◽  
Strength And Plasticity ◽  
Backscatter Diffraction

Mg–2Y–0.6Nd–0.6Zr alloy was first deformed by equal channel angular pressing (ECAP), then rolled and deformed under ultralow temperature conditions (liquid nitrogen immersion), and finally annealed. Optical microscopy (OM), electron backscatter diffraction technology (EBSD), and transmission electron microscopy (TEM) were used to analyze the evolution of the multiscale microstructure and changes in the mechanical properties of the alloy under ultralow temperatures and various annealing conditions. The results showed that the alloy treated with ECAP obtained fine grains, and a large number of fine twins were formed during the ultralow-temperature rolling process, which promoted the improvement of its hardness and strength and provided numerous preferential nucleation sites. The annealing made it easier to induce recrystallization and improve the recrystallization nucleation rate. The twin boundary produced by the alloy after ultralow-temperature rolling and the uniform fine grains formed by annealing resulted in excellent strength and plasticity of the alloy. The twins formed after rolling under ultralow temperatures were mainly {101-2} <1-011> tensile twins. The alloy had comprehensive mechanical properties with a tensile strength of 186.15 MPa and an elongation of 29% after annealing at 350 °C for 10 min.

Where are the geometrically necessary dislocations accommodating small imprints?

2009 ◽  
Vol 24 (3) ◽  
pp. 647-651 ◽  
Author(s):  
M. Rester ◽  
C. Motz ◽  
R. Pippan
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Twin Boundary ◽  
Crystal Orientation ◽  
Electron Backscatter Diffraction ◽  
Transmission Electron ◽  
Electron Backscatter ◽  
Copper Single Crystals ◽  
Backscatter Diffraction ◽  
Small Misorientation

Electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM) analyses of small indentations in copper single crystals exhibit only slight changes of the crystal orientation in the surroundings of the imprints. Far-reaching dislocations might be the reason for these small misorientation changes. Using EBSD and TEM technique, this work makes an attempt to visualize the far-propagating dislocations by introducing a twin boundary in the vicinity of small indentations. Because dislocations piled up at the twin boundary produce a misorientation gradient, the otherwise far-propagating dislocations can be detected.

Orientation relationships of carlsbergite in schreibersite and kamacite in the north Chile iron meteorite

2006 ◽  
Vol 70 (4) ◽  
pp. 373-382 ◽  
Author(s):  
G. Nolze ◽  
G. Wagner ◽  
R. Saliwan Neumann ◽  
R. Skála ◽  
V. Geist
Keyword(s):  
Electron Backscatter Diffraction ◽  
Metallic Matrix ◽  
Iron Meteorite ◽  
Orientation Relationships ◽  
Orientation Relation ◽  
Crystalline Materials ◽  
The North ◽  
Transmission Electron ◽  
Backscatter Diffraction ◽  
General Connection

AbstractThe crystallographic orientation of carlsbergite (CrN) in the north Chile meteorite (hexahedrite) was investigated using electron backscatter diffraction and transmission electron microscopy. These studies examined the CrN crystals in the rhabdites (idiomorphic schreibersite) and in kamacite. It was found that the CrN crystals embedded in rhabdite show a number of different orientation relationships with the host crystals. These orientations can be explained based on the lattice dimensions of both coexisting crystalline materials. It was also found that both carlsbergite and kamacite are characterized by a high dislocation density (≥ l09 cm-2) while rhabdite is free of dislocations. It is supposed that in spite of the deformed metallic matrix, a general connection between the orientation relation of all the phases involved exists.

Physical Based Microstructure Modelling Coupled with Nucleation Theory during and after Hot Forming of AA5083

2010 ◽  
Vol 89-91 ◽  
pp. 509-514
Author(s):  
Pavel Sherstnev ◽  
Christof Sommitsch ◽  
Stefan Mitsche ◽  
Carsten Melzer
Keyword(s):  
Aluminium Alloy ◽  
Hot Rolling ◽  
Volume Fraction ◽  
Electron Backscatter Diffraction ◽  
Grain Structure ◽  
Nucleation Theory ◽  
Structure Evolution ◽  
Nucleation Sites ◽  
Nucleation Mechanisms ◽  
Backscatter Diffraction

A physical model based on three types of dislocations and three nucleation sites for recrystallized grain is applied to hot rolling simulation. This model was implemented into a commercial Finite Element (FE) analysis package FORGE 2008 to calculate both the structure evolution during and the recrystallized volume fraction after hot working of aluminium alloy 5083. It is shown that the main nucleation mechanisms in the aluminium alloy are the particle stimulated nucleation (PSN) and nucleation at grain boundaries. Hence the precipitation kinetics during homogenisation was investigated by use of the thermodynamic calculation software MatCalc. To validate the simulation results hot rolling experiments were performed by means of a laboratory mill. The grain structure evolution was analysed by electron backscatter diffraction (EBSD).

Heteroepitaxy of Ge on Cube-Textured Ni(001) Foils Through CaF2 Buffer Layer

MRS Advances ◽  
2016 ◽  
Vol 1 (43) ◽  
pp. 2947-2952
Author(s):  
L. Chen ◽  
Z.-H. Lu ◽  
T.-M. Lu ◽  
I. Bhat ◽  
S.B. Zhang ◽  
...  
Keyword(s):  
Buffer Layer ◽  
High Efficiency ◽  
Electron Backscatter Diffraction ◽  
Low Cost ◽  
High Quality ◽  
Tem Analysis ◽  
Transmission Electron ◽  
Electron Backscatter ◽  
Image Position ◽  
Backscatter Diffraction

ABSTRACTEpitaxial Ge films are useful as a substrate for high-efficiency solar cell applications. It is possible to grow epitaxial Ge films on low cost, cube textured Ni(001) sheets using CaF2(001) as a buffer layer. Transmission electron microscopy (TEM) analysis indicates that the CaF2(001) lattice has a 45o in-plane rotation relative to the Ni(001) lattice. The in-plane epitaxy relationships are CaF2[110]//Ni[100] and CaF2[$\bar 1$10]//Ni[010]. Energy dispersive spectroscopy (EDS) shows a sharp interface between Ge/CaF2 as well as between CaF2/Ni. Electron backscatter diffraction (EBSD) shows that the Ge(001) film has a large grain size (∼50 μm) with small angle grain boundaries (< 8o). The epitaxial Ge thin film has the potential to be used as a substrate to grow high quality III-V and II-VI semiconductors for optoelectronic applications.

Unusual Microstructural Development upon Gaseous Nitriding of Fe-4.65at% Al Alloy

2010 ◽  
Vol 89-91 ◽  
pp. 371-376
Author(s):  
S. Meka ◽  
R.E. Schacherl ◽  
E. Bischoff ◽  
Eric J. Mittemeijer
Keyword(s):  
Electron Backscatter Diffraction ◽  
Ferrite Matrix ◽  
Microstructural Development ◽  
Al Alloy ◽  
X Ray Diffraction ◽  
Gaseous Nitriding ◽  
Backscatter Diffraction ◽  
Micro Analysis ◽  
Very High ◽  
Plate Type

Employing NH3/H2 gas mixtures, Fe-4.65at% Al alloy specimens were nitrided to assess how the presence of Al, originally dissolved in the ferrite matrix, influences the development of γ-Fe4N1-x phase in the surface adjacent region. The nitrided specimens were characterized by light microscopy, X-ray diffraction, Electron Backscatter Diffraction and Electron Probe Micro Analysis. Surprisingly, formation of ε-Fe2N1-x was observed, although, for the applied nitriding parameters (nitriding potential and temperature), only the formation of γ-Fe4N1-x would be expected in case of nitriding pure ferrite. An unusual plate-type morphology of γ-Fe4N1-x was observed, contrasting with the usual continuous layer-type growth observed upon nitriding iron, Fe-Cr and Fe-V alloys. These unexpected phenomena may be explained as consequences of the need to realize a very high nitrogen supersaturation in the ferrite matrix in order to initiate the precipitation of AlN.

Sign in / Sign up

Export Citation Format

Share Document