scholarly journals Towards Efficient Acidic Catalysts via Optimization of SO3H-Organosilane Immobilization on SBA-15 under Increased Pressure: Potential Applications in Gas and Liquid Phase Reactions

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7226
Author(s):  
Maciej Trejda ◽  
Ada Kaszuba ◽  
Ardian Nurwita ◽  
Maria Ziolek
Keyword(s):  
Liquid Phase ◽  
Pressure Potential ◽  
Optimum Pressure ◽  
Acidic Catalysts ◽  
Acidic Sites ◽  
Potential Applications ◽  
Glycerol Dehydration ◽  
The Stability ◽  
Post Synthesis ◽  
Increased Pressure

In this paper, the optimization of the synthesis of catalysts based on acidic mesoporous silica of the SBA-15 type by post-synthesis immobilization of 3-(trihydroxysilyl)-1-propanesulfonic acid (TPS) under increased pressure up to 20 bar is reported. Sample structures and composition were examined by XRD measurement, low-temperature N2 adsorption/desorption and elemental analysis. The catalytic activities of the materials obtained were determined in both gas and liquid phase processes, i.e., by esterification of acetic acid and glycerol dehydration, respectively. The optimum pressure for modification leading to the highest number of acidic sites was found to be 10 bar. The final material was very active and stable in liquid phase processes; however, the stability in the gas-phase process was unsatisfactory due to the loss of sulphonic species from the catalyst surface.

scholarly journals Insight into Active Centers and Anti-Coke Behavior of Niobium-Containing SBA-15 for Glycerol Dehydration

Catalysts ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 488
Author(s):  
Katarzyna Stawicka ◽  
Maciej Trejda ◽  
Maria Ziolek
Keyword(s):  
Coke Formation ◽  
Catalytic Performance ◽  
Acid Sites ◽  
Silica Matrix ◽  
High Concentration ◽  
Active Centers ◽  
Acidic Sites ◽  
Glycerol Dehydration ◽  
Adsorption Desorption ◽  
Insight Into

Niobium containing SBA-15 was prepared by two methods: impregnation with different amounts of ammonium niobate(V) oxalate (Nb-15/SBA-15 and Nb-25/SBA-15 containing 15 wt.% and 25 wt.% of Nb, respectively) and mixing of mesoporous silica with Nb2O5 followed by heating at 500 °C (Nb2O5/SBA-15). The use of these two procedures allowed obtaining materials with different textural/surface properties determined by N2 adsorption/desorption isotherms, XRD, UV-Vis, pyridine, and NO adsorption combined with FTIR spectroscopy. Nb2O5/SBA-15 contained exclusively crystalline Nb2O5 on the SBA-15 surface, whereas the materials prepared by impregnation had both metal oxide and niobium incorporated into the silica matrix. The niobium species localized in silica framework generated Brønsted (BAS) and Lewis (LAS) acid sites. The inclusion of niobium into SBA-15 skeleton was crucial for the achievement of high catalytic performance. The strongest BAS were on Nb-25/SBA-15, whereas the highest concentration of BAS and LAS was on Nb-15/SBA-15 surface. Nb2O5/SBA-15 material possessed only weak LAS and BAS. The presence of the strongest BAS (Nb-25/SBA-15) resulted in the highest dehydration activity, whereas a high concentration of BAS was unfavorable. Silylation of niobium catalysts prepared by impregnation reduced the number of acidic sites and significantly increased acrolein yield and selectivity (from ca. 43% selectivity for Nb-25/SBA-15 to ca. 61% for silylated sample). This was accompanied by a considerable decrease in coke formation (from 47% selectivity for Nb-25/SBA-15 to 27% for silylated material).

scholarly journals A pH-Responsive Foam Formulated with PAA/Gemini 12-2-12 Complexes

2021 ◽  
Vol 5 (3) ◽  
pp. 37
Author(s):  
Hernán Martinelli ◽  
Claudia Domínguez ◽  
Marcos Fernández Leyes ◽  
Sergio Moya ◽  
Hernán Ritacco
Keyword(s):  
Surface Tension ◽  
Dynamic Surface Tension ◽  
Foam Formation ◽  
Ph Responsive ◽  
Dynamic Surface ◽  
X Ray ◽  
Equilibrium Surface Tension ◽  
Potential Applications ◽  
The Stability ◽  
Air Interfaces

In the search for responsive complexes with potential applications in the formulation of smart dispersed systems such as foams, we hypothesized that a pH-responsive system could be formulated with polyacrylic acid (PAA) mixed with a cationic surfactant, Gemini 12-2-12 (G12). We studied PAA-G12 complexes at liquid–air interfaces by equilibrium and dynamic surface tension, surface rheology, and X-ray reflectometry (XRR). We found that complexes adsorb at the interfaces synergistically, lowering the equilibrium surface tension at surfactant concentrations well below the critical micelle concentration (cmc) of the surfactant. We studied the stability of foams formulated with the complexes as a function of pH. The foams respond reversibly to pH changes: at pH 3.5, they are very stable; at pH > 6, the complexes do not form foams at all. The data presented here demonstrate that foam formation and its pH responsiveness are due to interfacial dynamics.

scholarly journals Application of microwave radiation in the grafting of acidic sites on SBA-15 type material

2021 ◽  
Author(s):  
Maciej Trejda ◽  
Magdalena Drobnik ◽  
Ardian Nurwita
Keyword(s):  
Microwave Radiation ◽  
Thermal Analyses ◽  
Conventional Heating ◽  
Material Surface ◽  
Test Reaction ◽  
Study Materials ◽  
Mesoporous Support ◽  
Acidic Sites ◽  
Post Synthesis ◽  
Adsorption Desorption

AbstractMesoporous silica of SBA-15 type was modified for the first time with 3-(trihydroxysiyl)-1-propanesulfonic acid (TPS) by post-synthesis modification involving microwave or conventional heating in order to generate the Brønsted acidic centers on the material surface. The samples structure and composition were examined by low temperature N2 adsorption/desorption, XRD, HRTEM, elemental and thermal analyses. The surface properties were evaluated by esterification of acetic acid with n-hexanol used as the test reaction. A much higher efficiency of TPS species incorporation was reached with the application of microwave radiation for 1 h than conventional modification for 24 h. It was found that the structure of mesoporous support was preserved after modification using both methods applied in this study. Materials obtained with the use of microwave radiation showed a superior catalytic activity and high stability.

The Stability of Chromium in CrAPO-5, CrAPO-11, and CrS-1 during Liquid Phase Oxidations

1998 ◽  
Vol 175 (1) ◽  
pp. 62-69 ◽  
Author(s):  
H.E.B. Lempers ◽  
R.A. Sheldon
Keyword(s):  
Liquid Phase ◽  
The Stability

scholarly journals The effect of Malaysian stingless bee, Trigona spp. honey in promoting proliferation of the undifferentiated stem cell

2019 ◽  
pp. 10-19 ◽  
Author(s):  
Mohd Amin Marwan Mohamad ◽  
Muhammad Alif Mazlan ◽  
Muhammad Ibrahim ◽  
Afzan Mat Yusof ◽  
Shamsul Azlin Ahmad Shamsuddin ◽  
...  
Keyword(s):  
Stem Cells ◽  
Culture Media ◽  
Proliferative Effect ◽  
Natural Medicine ◽  
Ability To Regenerate ◽  
Potential Applications ◽  
Standard Culture ◽  
The Stability ◽  
Dose Dependent ◽  
Standard Culture Medium

Stem cells provide various potential applications in regenerative medicine through its ability of self-renewal and differentiation. Among the various stem cells, dental pulp stem cells (DPSCs) have shown encouraging results in their ability to regenerate. Honey has been used in traditional culture as a natural medicine in supporting wound healing. Yet, very few studies on honey were conducted for its potential as a proliferative agent for stem cells. The aim of this study is to evaluate the stability of two Trigona spp. honeys (1 and 2) added in culture media and its proliferative effect on DPSCs. Both honeys were diluted with standard culture medium through dilution process to prepare the concentrations of 0.01%, 0.04%, 0.10% and 0.25%. DPSCs were treated with the diluted honeys for 24 hours. The proliferative activity was determined through the images taken using an inverted microscope for every six hours. In addition, the MTT assay was conducted to determine the cell viability of DPSCs when treated with both honey 1 and 2 at various concentrations. The results showed a stable culture media added with honey for three days and a dose-dependent proliferative effect of both Trigona spp. honey samples on DPSCs. Optimum proliferative effects were observed at 24 hours for both Trigona spp. honey 1 and 2 on DPSCs. The optimum concentration of Trigona spp. honey 1 was from 0.04% to 0.10% and Trigona spp. honey 2 was below 0.01%. It is concluded that Trigona spp. honey has a promising proliferative effect on DPSCs.

scholarly journals Catalytic Performance of Nitrogen-Doped Activated Carbon Supported Pd Catalyst for Hydrodechlorination of 2,4-Dichlorophenol or Chloropentafluoroethane

Molecules ◽  
2019 ◽  
Vol 24 (4) ◽  
pp. 674 ◽  
Author(s):  
Haodong Tang ◽  
Bin Xu ◽  
Meng Xiang ◽  
Xinxin Chen ◽  
Yao Wang ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Liquid Phase ◽  
Gas Phase ◽  
Nitrogen Doping ◽  
Catalyst Surface ◽  
Catalytic Performance ◽  
Atomic Ratio ◽  
Pd Catalyst ◽  
Nitrogen Doped ◽  
The Stability

Nitrogen-doped activated carbon (N-AC) obtained through the thermal treatment of a mixture of HNO3-pretreated activated carbon (AC) and urea under N2 atmosphere at 600 °C was used as the carrier of Pd catalyst for both liquid-phase hydrodechlorination of 2,4-dichlorophenol (2,4-DCP) and gas-phase hydrodechlorination of chloropentafluoroethane (R-115). The effects of nitrogen doping on the dispersion and stability of Pd, atomic ratio of Pd/Pd2+ on the surface of the catalyzer, the catalyst’s hydrodechlorination activity, as well as the stability of N species in two different reaction systems were investigated. Our results suggest that, despite no improvement in the dispersion of Pd, nitrogen doping may significantly raise the atomic ratio of Pd/Pd2+ on the catalyst surface, with a value of 1.2 on Pd/AC but 2.2 on Pd/N-AC. Three types of N species, namely graphitic, pyridinic, and pyrrolic nitrogen, were observed on the surface of Pd/N-AC, and graphitic nitrogen was stable in both liquid-phase hydrodechlorination of 2,4-DCP and gas-phase hydrodechlorination of R-115, with pyridinic and pyrrolic nitrogen being unstable during gas-phase hydrodechlorination of R-115. As a result, the average size of Pd nanocrystals on Pd/N-AC was almost kept unchanged after liquid-phase hydrodechlorination of 2,4-DCP, whereas crystal growth of Pd was clearly observed on Pd/N-AC after gas-phase hydrodechlorination of R-115. The activity test revealed that Pd/N-AC exhibited a much better performance than Pd/AC in liquid-phase hydrodechlorination of 2,4-DCP, probably due to the enhanced stability of Pd exposed to the environment resulting from nitrogen doping as suggested by the higher atomic ratio of Pd/Pd2+ on the catalyst surface. In the gas-phase hydrodechlorination of R-115, however, a more rapid deactivation phenomenon occurred on Pd/N-AC than on Pd/AC despite a higher activity initially observed on Pd/N-AC, hinting that the stability of pyridinic and pyrrolic nitrogen plays an important role in the determination of catalytic performance of Pd/N-AC.

scholarly journals Strain-Tuned Nodal Ring in Two-Dimensional Zn3C6S6 Monolayers

2020 ◽  
Vol 2020 ◽  
pp. 1-6
Author(s):  
Jia-Qi Zong ◽  
Wei-Xiao Ji ◽  
Chang-Wen Zhang ◽  
Ping Li ◽  
Pei-Ji Wang
Keyword(s):  
Compressive Strain ◽  
First Principle ◽  
Two Dimensional ◽  
First Principle Calculations ◽  
Potential Applications ◽  
Electron Orbit ◽  
Density Map ◽  
The Stability ◽  
Partial Charge Density ◽  
Ring Material

The nodal ring material has recently attracted wide attention due to its singular properties and potential applications in spintronics. Here, two-dimensional Zn3C6S6 is calculated and discussed by using first-principle calculations. We found that two-dimensional Zn3C6S6 can generate a nodal ring at 10% compressive strain, and the existence of the ring is proved by a partial charge density map. And as the compressive strain increases, the nodal ring does not disappear. At the same time, the stability of the electron-orbit coupling to the nodal ring is applied. Our findings indicate that the two-dimensional Zn3C6S6 is promising in new electronic and spintronic applications.

scholarly journals The Effect of Tourmaline on SCR Denitrification Activity of MnOx/TiO2 at Low Temperature

Catalysts ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1020
Author(s):  
Yizhe Helian ◽  
Suping Cui ◽  
Xiaoyu Ma
Keyword(s):  
Low Temperature ◽  
Catalytic Reduction ◽  
Catalytic Performance ◽  
Scr Catalyst ◽  
Highly Efficient ◽  
Nh3 Scr ◽  
Catalytic Material ◽  
Acidic Sites ◽  
Denitrification Activity ◽  
The Stability

Selective catalytic reduction (SCR) technology is the most widely used flue gas denitration technology at present. The stability of a catalyst is the main factor limiting the development of this technology. In this study, an environmentally friendly and highly efficient NH3-SCR catalyst was prepared by coprecipitation method from acidolysis residue of industrial waste and tourmaline. We found that the addition of tourmaline has an important impact on the denitration activity of the catalytic material. The NOx conversion exceeded 97% at 200 °C with the dosage of 10% tourmaline, which is about 7% higher than that without doping. The improvement of catalytic performance was mostly attributed to the permanent electrodes of tourmaline, which effectively promotes the dispersion of MnOx/TiO2 catalytic materials, increases the number of acidic sites and changes the valence distribution of manganese ions in products, which speeds up the diffusion of protons and ions, resulting in the acceleration of redox reaction. These as-developed tourmaline-modified MnOx/TiO2 materials have been demonstrated to be promising as a new type of highly efficient low-temperature NH3-SCR catalyst.

Chitosan-Stabilized Oil-in-Water Nanoemulsions

2022 ◽  
pp. 44-58
Author(s):  
Viktoria Milkova
Keyword(s):  
Physicochemical Characteristics ◽  
Biological Properties ◽  
Precise Control ◽  
Theoretical Approaches ◽  
Natural Polysaccharide ◽  
Oil In Water ◽  
Degree Of Acetylation ◽  
Key Factor ◽  
Potential Applications ◽  
The Stability

Chitosan is a natural polysaccharide and emulsifier that can ensure a significant emulsion stability at suitable pH, ionic strength, composition, concentration, or thermal processing. The evaluation of the electrokinetic properties is a key factor in investigation of the stability of the nanoemulsions with a view to their potential applications in bionanotechnology. Consequently, the precise control over the physicochemical characteristics of chitosan (degree of acetylation, DA and molecular weight, Mw) can provide a high stability and specific biological properties of the developed functional structures. The chapter is focused on the interpretation of the electrokinetic response from nanoemulsion stabilized by adsorption of chitosan (as a polyelectrolyte or uncharged polymer) by using appropriate theoretical approaches.

Sign in / Sign up

Export Citation Format

Share Document