scholarly journals Evaluation of Mechanical Properties and Volatile Organic Extractable to Investigate LLDPE and LDPE Polymers on Final Packaging for Semisolid Formulation

Pharmaceutics ◽  
2018 ◽  
Vol 10 (3) ◽  
pp. 113 ◽  
Author(s):  
Arianna Cozzi ◽  
Benedetta Briasco ◽  
Enrico Salvarani ◽  
Barbara Mannucci ◽  
Filippo Fangarezzi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Manufacturing Process ◽  
Raw Materials ◽  
Plastic Material ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Two Samples ◽  
Volatile Organic ◽  
The Difference ◽  
And Performance

Plastic material is used for a wide variety of commercial packaging due to being inexpensive, lightweight, and due to its resistance. In pharmaceutics, container-content compatibility studies are required for product authorization. Many guidelines and publications are available; however, the information is often only related to the raw materials used to produce packaging. During the manufacturing process, substances can be added to improve the product characteristics and performance, resulting in a processed material that is considerably different from the unprocessed material. In this study, the mechanical properties of low-density polyethylene (LDPE) and linear low-density polyethylene (LLDPE) specimens fabricated according to standard ISO 527 and specimens fabricated with the same materials, but obtained from final packaging, were evaluated. Furthermore, we examined the interaction between a semisolid formulation and LLDPE and LDPE as a final packaging, by subjecting two samples to accelerated degradation testing. Then, mechanical properties and volatile organic extractable were evaluated. Simulated solar radiation did not induce changes in the packaging mechanical properties and no extracts were detectable. The thermal shock strongly influenced the mechanical behavior, and interactions between packaging contents were identified. The present work underlines the difference between analyzing the standard ISO specimens versus samples obtained from final packaging in order to evaluate the packaging under real use conditions. An evaluation on the final packaging, instead on standard specimens, can provide information about the plastic material after the manufacturing process and the interaction between packaging and content.

scholarly journals Low-Temperature Mechanical Properties of High-Density and Low-Density Polyethylene and Their Blends

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1821
Author(s):  
Ildar I. Salakhov ◽  
Nadim M. Shaidullin ◽  
Anatoly E. Chalykh ◽  
Mikhail A. Matsko ◽  
Alexey V. Shapagin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Impact Strength ◽  
Relative Elongation ◽  
High Density ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Elongation At Break ◽  
Subzero Temperatures ◽  
Izod Impact

Low-temperature properties of high-density polyethylene (HDPE), low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), and their blends were studied. The analyzed low-temperature mechanical properties involve the deformation resistance and impact strength characteristics. HDPE is a bimodal ethylene/1-hexene copolymer; LDPE is a branched ethylene homopolymer containing short-chain branches of different length; LLDPE is a binary ethylene/1-butene copolymer and an ethylene/1-butene/1-hexene terpolymer. The samples of copolymers and their blends were studied by gel permeation chromatography (GPC), differential scanning calorimetry (DSC), 13С NMR spectroscopy, and dynamic mechanical analysis (DMA) using testing machines equipped with a cryochamber. It is proposed that such parameters as “relative elongation at break at −45 °C” and “Izod impact strength at −40 °C” are used instead of the ductile-to-brittle transition temperature to assess frost resistance properties because these parameters are more sensitive to deformation and impact at subzero temperatures for HDPE. LLDPE is shown to exhibit higher relative elongation at break at −45 °C and Izod impact strength at −20 ÷ 60 °C compared to those of LDPE. LLDPE terpolymer added to HDPE (at a content ≥ 25 wt.%) simultaneously increases flow properties and improves tensile properties of the blend at −45 °C. Changes in low-temperature properties as a function of molecular weight, MWD, crystallinity, and branch content were determined for HDPE, LLDPE, and their blends. The DMA data prove the resulting dependences. The reported findings allow one to understand and predict mechanical properties in the HDPE–LLDPE systems at subzero temperatures.

Physical and mechanical properties of linear low-density polyethylene/cycloolefin copolymer/layered silicate nanocomposite

2015 ◽  
Vol 37 (11) ◽  
pp. 3167-3174 ◽  
Author(s):  
S. Sánchez-Valdes ◽  
E. Ramírez-Vargas ◽  
L.F. Ramos de Valle ◽  
J.G. Martinez-Colunga ◽  
J. Romero-Garcia ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Layered Silicate ◽  
Physical And Mechanical Properties ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Linear Low Density Polyethylene

Effect of fillers on mechanical properties of recycled low density polyethylene composites under weathered condition

2020 ◽  
Vol 15 (3) ◽  
pp. 44-49
Author(s):  
Ibiyemi A. Idowu ◽  
Olutosin O. Ilori
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Pure Water ◽  
Mechanical Tests ◽  
Filler Loading ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Hardness Property ◽  
Recycled Low Density Polyethylene ◽  
Polyethylene Composites

The study examined the effect of fillers on the mechanical properties of the recycled low density polyethylene composites under weathered condition with a view of managing the generation and disposal of plastic wastes. Discarded pure water sachets and fillers (glass and talc) were sourced and recycled. Recycled low density polyethylene (RLDPE) and preparation of RLDPE/glass, RLDPE/talc and RLDPE/glass/talc composites were carried out using a furnace at compositions of 0 – 40% in steps of 10% by weight. The mixtures were poured into hand-laid mould. The samples produced were exposed to sunlight for eight (8) weeks and their mechanical properties were studied. The results of mechanical tests revealed that tensile strength decreased with increasing filler loading while impact strength and hardness property increased marginally and considerably with increasing filler loading for all the composites respectively. The study concluded that glass and talc were able to reinforce recycled low density polyethylene under weathered condition. Keywords: Recycled Low Density Polyethylene (RLDPE); Fillers; Glass, Talc; Weathering condition; Sunlight; and Mechanical properties; Tensile strength, Impact and hardness

Benchmarking the Dual and Compound Techniques-Based Branching Design Strategy Used for Upgrading of Pressurized Hydraulic Systems

2021 ◽  
Vol 143 (2) ◽  
Author(s):  
Waêl Ben Amira ◽  
Ali Triki
Keyword(s):  
Pressure Wave ◽  
Plastic Material ◽  
Conventional Technique ◽  
Steel Pipe ◽  
Low Density Polyethylene ◽  
Piping System ◽  
Low Density ◽  
Hydraulic Systems ◽  
Transient Pressure ◽  
Pipe Flow Model

Abstract Prior research has recognized that the compound- and dual-technique-based branching redesign measures, used as alternatives to the conventional technique-based one, were effective in upgrading steel pipe-based pressurized hydraulic systems. Principally, the compound technique used two different plastic material types for the short-penstock instead of the single material type utilized in the conventional technique. However, the dual technique is based on splitting the single penstock installed in the conventional technique into a set of dual subpenstocks placed at each connection of the main-piping system to hydraulic parts. This handling aimed at improving the conventional technique efficiency with regard to the tradeoff between the magnitude attenuation and period expansion effects of the transient pressure-wave signal. Accordingly, this study proposed a comprehensive comparison between the compound- and dual-technique-based branching strategy with particular focus on the tradeoff between the two last parameters. The plastic material types demonstrated in this study included the high- or low-density polyethylene. The application addressed a waterhammer maneuver initiated into a reservoir-steel-pipe-valve system. Numerical computations used the method of characteristics for the discretization of the 1D extended pressurized-pipe flow model, embedding the Kelvin–Voigt and Vitkovsky formulations. The finding of this study suggested that the high- or low-density polyethylene (HDPE–LDPE) setup of the compound technique is the most prominent protected system setup, providing an acceptable tradeoff between the attenuation of magnitude and the expansion of the period of pressure-wave oscillation.

Cable and Wire Application: Adoption of Nanomagnesium Hydroxide Blended with LDPE/EVA for Mechanical and Physical Properties

2013 ◽  
Vol 701 ◽  
pp. 202-206
Author(s):  
Ahmad Aroziki Abdul Aziz ◽  
Sakinah Mohd Alauddin ◽  
Ruzitah Mohd Salleh ◽  
Mohammed Iqbal Shueb
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Melt Flow Index ◽  
Low Density Polyethylene ◽  
Flow Index ◽  
Low Density ◽  
Elongation At Break ◽  
Mechanical And Physical Properties ◽  
Poly Ethylene ◽  
Loading Amount

Effect of nanoMagnesium Hydroxide (MH) nloading amount to the mechanical and physical properties of Low Density Polyethylene (LDPE)/ Poly (ethylene-co vinyl acetate)(EVA) nanocomposite has been described and investigated in this paper. The tensile strength results show that increased amount of nanofiller will decrease and deteriorate the mechanical properties. The elongation at break decreased continuously with increasing loading of nanofiller. Generally, mechanical properties become poorer as loading amount increase. Melt Flow Index values for physical properties also provide same trend as mechanical properties results. Increase filler amount reduced MFI values whereby increased resistance to the flow.

Sign in / Sign up

Export Citation Format

Share Document