scholarly journals Tuning the Properties of PNIPAm-Based Hydrogel Scaffolds for Cartilage Tissue Engineering

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3154
Author(s):  
Md Mohosin Rana ◽  
Hector De la Hoz Siegler
Keyword(s):  
Tissue Engineering ◽  
Physical Properties ◽  
Tissue Regeneration ◽  
Structural Integrity ◽  
Cartilage Tissue ◽  
Design Parameters ◽  
Comprehensive Overview ◽  
Hydrogel Scaffolds ◽  
Design Variables

Poly(N-isopropylacrylamide) (PNIPAm) is a three-dimensional (3D) crosslinked polymer that can interact with human cells and play an important role in the development of tissue morphogenesis in both in vitro and in vivo conditions. PNIPAm-based scaffolds possess many desirable structural and physical properties required for tissue regeneration, but insufficient mechanical strength, biocompatibility, and biomimicry for tissue development remain obstacles for their application in tissue engineering. The structural integrity and physical properties of the hydrogels depend on the crosslinks formed between polymer chains during synthesis. A variety of design variables including crosslinker content, the combination of natural and synthetic polymers, and solvent type have been explored over the past decade to develop PNIPAm-based scaffolds with optimized properties suitable for tissue engineering applications. These design parameters have been implemented to provide hydrogel scaffolds with dynamic and spatially patterned cues that mimic the biological environment and guide the required cellular functions for cartilage tissue regeneration. The current advances on tuning the properties of PNIPAm-based scaffolds were searched for on Google Scholar, PubMed, and Web of Science. This review provides a comprehensive overview of the scaffolding properties of PNIPAm-based hydrogels and the effects of synthesis-solvent and crosslinking density on tuning these properties. Finally, the challenges and perspectives of considering these two design variables for developing PNIPAm-based scaffolds are outlined.

scholarly journals Chondrogenic Potential of Dental-Derived Mesenchymal Stromal Cells

Osteology ◽  
2021 ◽  
Vol 1 (3) ◽  
pp. 149-174
Author(s):  
Naveen Jeyaraman ◽  
Gollahalli Shivashankar Prajwal ◽  
Madhan Jeyaraman ◽  
Sathish Muthu ◽  
Manish Khanna
Keyword(s):  
Tissue Engineering ◽  
Mesenchymal Stromal Cells ◽  
Tissue Regeneration ◽  
Stromal Cells ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Dentin Matrix

The field of tissue engineering has revolutionized the world in organ and tissue regeneration. With the robust research among regenerative medicine experts and researchers, the plausibility of regenerating cartilage has come into the limelight. For cartilage tissue engineering, orthopedic surgeons and orthobiologists use the mesenchymal stromal cells (MSCs) of various origins along with the cytokines, growth factors, and scaffolds. The least utilized MSCs are of dental origin, which are the richest sources of stromal and progenitor cells. There is a paradigm shift towards the utilization of dental source MSCs in chondrogenesis and cartilage regeneration. Dental-derived MSCs possess similar phenotypes and genotypes like other sources of MSCs along with specific markers such as dentin matrix acidic phosphoprotein (DMP) -1, dentin sialophosphoprotein (DSPP), alkaline phosphatase (ALP), osteopontin (OPN), bone sialoprotein (BSP), and STRO-1. Concerning chondrogenicity, there is literature with marginal use of dental-derived MSCs. Various studies provide evidence for in-vitro and in-vivo chondrogenesis by dental-derived MSCs. With such evidence, clinical trials must be taken up to support or refute the evidence for regenerating cartilage tissues by dental-derived MSCs. This article highlights the significance of dental-derived MSCs for cartilage tissue regeneration.

scholarly journals Fabrication and in Vitro Evaluation of Nanocomposite Hydrogel Scaffolds Based on Gelatin/PCL–PEG–PCL for Cartilage Tissue Engineering

ACS Omega ◽  
2019 ◽  
Vol 4 (1) ◽  
pp. 449-457 ◽  
Author(s):  
Nahideh Asadi ◽  
Effat Alizadeh ◽  
Azizeh Rahmani Del Bakhshayesh ◽  
Ebrahim Mostafavi ◽  
Abolfazl Akbarzadeh ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Cartilage Tissue Engineering ◽  
Cartilage Tissue ◽  
Nanocomposite Hydrogel ◽  
In Vitro Evaluation ◽  
Hydrogel Scaffolds

Decellularized bone extracellular matrix in skeletal tissue engineering

2020 ◽  
Vol 48 (3) ◽  
pp. 755-764
Author(s):  
Benjamin B. Rothrauff ◽  
Rocky S. Tuan
Keyword(s):  
Tissue Engineering ◽  
Bone Regeneration ◽  
Tissue Regeneration ◽  
Animal Studies ◽  
Tumor Resection ◽  
Regenerative Capacity ◽  
Skeletal Tissue ◽  
Large Bone

Bone possesses an intrinsic regenerative capacity, which can be compromised by aging, disease, trauma, and iatrogenesis (e.g. tumor resection, pharmacological). At present, autografts and allografts are the principal biological treatments available to replace large bone segments, but both entail several limitations that reduce wider use and consistent success. The use of decellularized extracellular matrices (ECM), often derived from xenogeneic sources, has been shown to favorably influence the immune response to injury and promote site-appropriate tissue regeneration. Decellularized bone ECM (dbECM), utilized in several forms — whole organ, particles, hydrogels — has shown promise in both in vitro and in vivo animal studies to promote osteogenic differentiation of stem/progenitor cells and enhance bone regeneration. However, dbECM has yet to be investigated in clinical studies, which are needed to determine the relative efficacy of this emerging biomaterial as compared with established treatments. This mini-review highlights the recent exploration of dbECM as a biomaterial for skeletal tissue engineering and considers modifications on its future use to more consistently promote bone regeneration.

scholarly journals Potential of 3-D tissue constructs engineered from bovine chondrocytes/silk fibroin-chitosan for in vitro cartilage tissue engineering

Biomaterials ◽  
2011 ◽  
Vol 32 (25) ◽  
pp. 5773-5781 ◽  
Author(s):  
Nandana Bhardwaj ◽  
Quynhhoa T. Nguyen ◽  
Albert C. Chen ◽  
David L. Kaplan ◽  
Robert L. Sah ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Silk Fibroin ◽  
Cartilage Tissue Engineering ◽  
Cartilage Tissue ◽  
Tissue Constructs

scholarly journals Calcium/Cobalt Alginate Beads as Functional Scaffolds for Cartilage Tissue Engineering

2016 ◽  
Vol 2016 ◽  
pp. 1-12 ◽  
Author(s):  
Stefano Focaroli ◽  
Gabriella Teti ◽  
Viviana Salvatore ◽  
Isabella Orienti ◽  
Mirella Falconi
Keyword(s):  
Tissue Engineering ◽  
Bone Morphogenetic Proteins ◽  
Transforming Growth Factor ◽  
Cartilage Tissue Engineering ◽  
Biomechanical Properties ◽  
Alginate Beads ◽  
Cartilage Tissue ◽  
Self Healing ◽  
Tissue Replacement

Articular cartilage is a highly organized tissue with complex biomechanical properties. However, injuries to the cartilage usually lead to numerous health concerns and often culminate in disabling symptoms, due to the poor intrinsic capacity of this tissue for self-healing. Although various approaches are proposed for the regeneration of cartilage, its repair still represents an enormous challenge for orthopedic surgeons. The field of tissue engineering currently offers some of the most promising strategies for cartilage restoration, in which assorted biomaterials and cell-based therapies are combined to develop new therapeutic regimens for tissue replacement. The current study describes thein vitrobehavior of human adipose-derived mesenchymal stem cells (hADSCs) encapsulated within calcium/cobalt (Ca/Co) alginate beads. These novel chondrogenesis-promoting scaffolds take advantage of the synergy between the alginate matrix and Co+2ions, without employing costly growth factors (e.g., transforming growth factor betas (TGF-βs) or bone morphogenetic proteins (BMPs)) to direct hADSC differentiation into cartilage-producing chondrocytes.

scholarly journals Cartilage Tissue Engineering Using Mesenchymal Stem Cells and 3D Chitosan Scaffolds – In vitro and in vivo Assays

10.5772/25085 ◽  
2011 ◽  
Author(s):  
Natalia Martins ◽  
Alessandra Arcoverde ◽  
Juliana Lott ◽  
Viviane Silva ◽  
Dawidson Gomes ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Cartilage Tissue Engineering ◽  
Cartilage Tissue ◽  
In Vivo Assays ◽  
Chitosan Scaffolds

TRENDS AND CHALLENGES OF CARTILAGE TISSUE ENGINEERING

2009 ◽  
Vol 21 (03) ◽  
pp. 149-155 ◽  
Author(s):  
Hsu-Wei Fang
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Growth Factors ◽  
Bone Cells ◽  
Cartilage Tissue Engineering ◽  
Bioactive Molecules ◽  
In Vivo Studies ◽  
Cartilage Tissue

Cartilage injuries may be caused by trauma, biomechanical imbalance, or degenerative changes of joint. Unfortunately, cartilage has limited capability to spontaneous repair once damaged and may lead to progressive damage and degeneration. Cartilage tissue-engineering techniques have emerged as the potential clinical strategies. An ideal tissue-engineering approach to cartilage repair should offer good integration into both the host cartilage and the subchondral bone. Cells, scaffolds, and growth factors make up the tissue engineering triad. One of the major challenges for cartilage tissue engineering is cell source and cell numbers. Due to the limitations of proliferation for mature chondrocytes, current studies have alternated to use stem cells as a potential source. In the recent years, a lot of novel biomaterials has been continuously developed and investigated in various in vitro and in vivo studies for cartilage tissue engineering. Moreover, stimulatory factors such as bioactive molecules have been explored to induce or enhance cartilage formation. Growth factors and other additives could be added into culture media in vitro, transferred into cells, or incorporated into scaffolds for in vivo delivery to promote cellular differentiation and tissue regeneration.Based on the current development of cartilage tissue engineering, there exist challenges to overcome. How to manipulate the interactions between cells, scaffold, and signals to achieve the moderation of implanted composite differentiate into moderate stem cells to differentiate into hyaline cartilage to perform the optimum physiological and biomechanical functions without negative side effects remains the target to pursue.

scholarly journals Suture Fiber Reinforcement of a 3D Printed Gelatin Scaffold for Its Potential Application in Soft Tissue Engineering

2021 ◽  
Vol 22 (21) ◽  
pp. 11600
Author(s):  
Dong Jin Choi ◽  
Kyoung Choi ◽  
Sang Jun Park ◽  
Young-Jin Kim ◽  
Seok Chung ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Dimensional Stability ◽  
3D Structure ◽  
Biological Properties ◽  
Dermal Fibroblasts ◽  
3D Scaffolds ◽  
3D Printed

Gelatin has excellent biological properties, but its poor physical properties are a major obstacle to its use as a biomaterial ink. These disadvantages not only worsen the printability of gelatin biomaterial ink, but also reduce the dimensional stability of its 3D scaffolds and limit its application in the tissue engineering field. Herein, biodegradable suture fibers were added into a gelatin biomaterial ink to improve the printability, mechanical strength, and dimensional stability of the 3D printed scaffolds. The suture fiber reinforced gelatin 3D scaffolds were fabricated using the thermo-responsive properties of gelatin under optimized 3D printing conditions (−10 °C cryogenic plate, 40–80 kPa pneumatic pressure, and 9 mm/s printing speed), and were crosslinked using EDC/NHS to maintain their 3D structures. Scanning electron microscopy images revealed that the morphologies of the 3D printed scaffolds maintained their 3D structure after crosslinking. The addition of 0.5% (w/v) of suture fibers increased the printing accuracy of the 3D printed scaffolds to 97%. The suture fibers also increased the mechanical strength of the 3D printed scaffolds by up to 6-fold, and the degradation rate could be controlled by the suture fiber content. In in vitro cell studies, DNA assay results showed that human dermal fibroblasts’ proliferation rate of a 3D printed scaffold containing 0.5% suture fiber was 10% higher than that of a 3D printed scaffold without suture fibers after 14 days of culture. Interestingly, the supplement of suture fibers into gelatin biomaterial ink was able to minimize the cell-mediated contraction of the cell cultured 3D scaffolds over the cell culture period. These results show that advanced biomaterial inks can be developed by supplementing biodegradable fibers to improve the poor physical properties of natural polymer-based biomaterial inks.

scholarly journals In vitro characterization of a novel magnetic fibrin-agarose hydrogel for cartilage tissue engineering

2020 ◽  
Vol 104 ◽  
pp. 103619 ◽  
Author(s):  
Ana Belén Bonhome-Espinosa ◽  
Fernando Campos ◽  
Daniel Durand-Herrera ◽  
José Darío Sánchez-López ◽  
Sébastien Schaub ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Cartilage Tissue Engineering ◽  
Cartilage Tissue ◽  
In Vitro Characterization ◽  
Agarose Hydrogel
Sign in / Sign up

Export Citation Format

Share Document