scholarly journals Fabrication and Characterization of Composite Biofilm of Konjac Glucomannan/Sodium Lignosulfonate/ε-Polylysine with Reinforced Mechanical Strength and Antibacterial Ability

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3367
Author(s):  
Xiaowei Xu ◽  
Jie Pang
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Mechanical Strength ◽  
Composite Film ◽  
Food Packaging ◽  
Mechanical Performance ◽  
Konjac Glucomannan ◽  
Potential Candidate ◽  
Sodium Lignosulfonate ◽  
Antibacterial Ability

In order to enforce the mechanical strength and antibacterial ability of biofilm and explore the underlying mechanism, sodium lignosulfonate (SL) and ε-polylysine (ε-PL) were introduced to fabricate the composite film of konjac glucomannan (KGM)/SL/ε-PL in the present study. According to our previous method, 1% (w/v) of KGM was the optimal concentration for the film preparation method, on the basis of which the amount of SL and ε-PL were screened by mechanical properties enforcement of film. The structure, mechanical performance and thermal stability of the film were characterized by SEM, FTIR, TGA and tensile strength tests. The optimized composite film was comprised of KGM 1% (w/v), SL 0.2% (w/v), and ε-PL 0.375% (w/v). The tensile strength (105.97 ± 4.58 MPa, p < 0.05) and elongation at break (95.71 ± 5.02%, p < 0.05) of the KGM/SL/ε-PL composite film was greatly improved compared with that of KGM. Meanwhile, the thermal stability and antibacterial property of film were also enhanced by the presence of SL and ε-PL. In co-culturation mode, the KGM/SL/ε-PL composite film showed good inhibitory effect on Escherichia coli (22.50 ± 0.31 mm, p < 0.05) and Staphylococcus aureus (19.69 ± 0.36 mm, p < 0.05) by determining the inhibition zone diameter. It was revealed that KGM/SL/ε-PL composite film shows enhanced mechanical strength and reliable antibacterial activities and it could be a potential candidate in the field of food packaging.

α-Cellulose-Based Films: Effect of Sodium Lignosulfonate (SLS) Incorporation on Physicochemical and Antibacterial Performance

2021 ◽  
Author(s):  
Xinyu Lu ◽  
Han Que ◽  
Haoquan Guo ◽  
Chenrong Ding ◽  
Xu Liu ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Hydrogen Bonds ◽  
Composite Film ◽  
Raw Materials ◽  
Mixed System ◽  
Cellulose Film ◽  
Sodium Lignosulfonate ◽  
Pure Cellulose ◽  
Antibacterial Performance

Abstract A homogeneous α-cellulose film was prepared by regeneration method from ZnCl2/CaCl2/cellulose mixed system and was further combined with sodium lignosulfonate (SLS) by crosslinking through interaction hydrogen bonds and “bridge linkages”. The physicochemical and antibacterial performance of films were all investigated and results showed that modified films exhibited stronger tensile strength, higher thermal stability, lower hydrophilic effect, better UV shielding as compared with those of pure cellulose film, and especially, better antibacterial ability derived from the presence of phenolic and sulfonate groups in SLS. This study proposed a simple and sustainable method for fabricating a multifunctional and environmentally friendly composite film by using two main lignocellulose resources as raw materials.

The Preparation and Property Research on Laponite-Poly (L-Lactide) Composite Film

2013 ◽  
Vol 750-752 ◽  
pp. 1919-1923 ◽  
Author(s):  
Guo Xian Zhou ◽  
Ming Wei Yuan ◽  
Lin Jiang ◽  
Ming Long Yuan ◽  
Hong Li Li
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Composite Film ◽  
Composite Films ◽  
Complexing Agent ◽  
Solution Blending ◽  
Method Of Solution ◽  
Thermal Stability Of ◽  
Scanning Electron

The laponite-poly (L-lactide) composite films are prepared by the method of solution blending with polylactide (PLA) and laponite. The result shows that the homogeneous and smooth composite film is prepared with 1, 4-dioxane. Thermogravimetry analysis (TG) and tensile strength studies demonstrate that the thermal stability and tensile strength are improved with the laponite added. The scanning electron microscopy (SEM) measurement indicates that the pores of composite films get uniform and network structure is more and more compact with compared to pure PLA film. The present study reveals that the laponite as a complexing agent can improve the mechanical properties and thermal stability of PLA.

Graphene oxide and zinc oxide decorated chitosan nanocomposite biofilms for packaging applications

2020 ◽  
Vol 40 (2) ◽  
pp. 152-157 ◽  
Author(s):  
Pınar Terzioglu ◽  
Yasin Altin ◽  
Ayse Kalemtas ◽  
Ayse Celik Bedeloglu
Keyword(s):  
Tensile Strength ◽  
Zinc Oxide ◽  
Graphene Oxide ◽  
Composite Film ◽  
Young’S Modulus ◽  
Mechanical Performance ◽  
Young's Modulus ◽  
Chitosan Film ◽  
Oxide Composite ◽  
Wide Range

AbstractRecently, due to sustainable development and environmental protection policies, there is increasing interest in the development of new biodegradable polymer-based multifunctional composites. Chitosan is one of the most remarkable and preferred biopolymers, which is environmentally friendly as well as renewable, biocompatible, and inexpensive. Though it has a wide range of potential applications, the major limitation of chitosan – the problem of poor mechanical performance – needs to be solved. In this work, graphene oxide was first produced and then used to manufacture a chitosan/graphene oxide/zinc oxide composite film through a casting method. The properties of the chitosan film and the chitosan/graphene oxide/zinc oxide composite film were investigated using Fourier transform infrared spectroscopy, mechanical, thermal gravimetric, and ultraviolet (UV)-visible spectroscopy analyses. The results showed that the incorporation of graphene oxide and zinc oxide into the chitosan matrix resulted in enhanced mechanical properties and thermal stability of chitosan biocomposite films. The graphene oxide- and zinc oxide-reinforced chitosan film showed 2527 MPa and 55.72 MPa of Young’s modulus and tensile strength, respectively, while neat chitosan showed only 1549 MPa and 37.91 MPa of Young’s modulus and tensile strength, respectively. Conversely, the addition of graphene oxide decreased the transmittance, notably in the UV region.

scholarly journals Hybrid Biocomposites Based on Poly(Lactic Acid) and Silica Aerogel for Food Packaging Applications

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4910 ◽  
Author(s):  
Alejandro Aragón-Gutierrez ◽  
Marina P. Arrieta ◽  
Mar López-González ◽  
Marta Fernández-García ◽  
Daniel López
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Silica Aerogel ◽  
Food Packaging ◽  
Mechanical Performance ◽  
Composite Films ◽  
Barrier Properties ◽  
Extrusion Process ◽  
Poly Lactic Acid ◽  
Barrier Performance

Bionanocomposites based on poly (lactic acid) (PLA) and silica aerogel (SiA) were developed by means of melt extrusion process. PLA-SiA composite films were plasticized with 15 wt.% of acetyl (tributyl citrate) (ATBC) to facilitate the PLA processability as well as to attain flexible polymeric formulations for films for food packaging purposes. Meanwhile, SiA was added in four different proportions (0.5, 1, 3 and 5 wt.%) to evaluate the ability of SiA to improve the thermal, mechanical, and barrier performance of the bionanocomposites. The mechanical performance, thermal stability as well as the barrier properties against different gases (carbon dioxide, nitrogen, and oxygen) of the bionanocomposites were evaluated. It was observed that the addition of 3 wt.% of SiA to the plasticized PLA-ATBC matrix showed simultaneously an improvement on the thermal stability as well as the mechanical and barrier performance of films. Finally, PLA-SiA film formulations were disintegrated in compost at the lab-scale level. The combination of ATBC and SiA sped up the disintegration of PLA matrix. Thus, the bionanocomposites produced here show great potential as sustainable polymeric formulations with interest in the food packaging sector.

Effect of reactive and non-reactive diluents on thermal and mechanical properties of epoxy resin

2017 ◽  
Vol 30 (10) ◽  
pp. 1159-1168 ◽  
Author(s):  
Animesh Sinha ◽  
Nazrul Islam Khan ◽  
Subhankar Das ◽  
Jiawei Zhang ◽  
Sudipta Halder
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Fracture Toughness ◽  
Tensile Strength ◽  
Polyethylene Glycol ◽  
Epoxy Resin ◽  
Mechanical Performance ◽  
Thermal And Mechanical Properties ◽  
Minor Variation ◽  
Reactive Diluents

The effect of reactive (polyethylene glycol) and non-reactive (toluene) diluents on thermal and mechanical properties (tensile strength, hardness and fracture toughness) of diglycidyl ether of bisphenol A epoxy resin (cured by triethylenetetramine) was investigated. The thermal stability and mechanical properties of the epoxy resin modified with reactive and non-reactive diluents at different wt% were investigated using thermo-gravimetric analyser, tensile test, hardness test and single-edge-notched bend test. A minor variation in thermal stability was observed for epoxy resin after addition of polyethylene glycol and toluene at 0.5 wt%; however, further addition of reactive and non-reactive diluents diminished the thermal stability. The addition of 10 wt% of polyethylene glycol in epoxy resin significantly enhances the tensile strength (∼12%), hardness (∼14%) and fracture toughness (∼24%) when compared to that of neat epoxy resin. In contrast, major drop in mechanical performance was observed after addition of toluene in epoxy. Furthermore, fracture surfaces were investigated under field emission scanning electron microscope to elucidate the failure mechanism.

Properties of PANI-PVA Composite Film

2011 ◽  
Vol 284-286 ◽  
pp. 253-256 ◽  
Author(s):  
Xiao Hua Wang ◽  
Ming Nie
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Composite Film ◽  
Matrix Effects ◽  
Drying Temperature ◽  
Thermal Stability Of

The polyaniline(PANI)-poly(vinyl alcoho1)(PVA) composite film doped with HC1 was prepared with PVA as matrix. Effects of PVA content, film drying temperature on properties of PANI-PVA composite film were studied. Tensile strength, elasticity, conductivity and thermal stability of PVA, HC1-PANI or PANI-PVA were compared. Tensile strength and elasticity of PVA film were the largest, its conductivity was the least. The conductivity of PANI-PVA was the largest, tensile strength and elasticity of PANI-PVA are bigger than those of HC1-PANI. The order of their thermal stability is PVA> HC1-PANI > PANI-PVA before 260°C, the order of their thermal stability is HC1-PANI>PANI-PVA> PVA after 260°C.

scholarly journals Properties of Polylactic Acid Reinforced by Hydroxyapatite Modified Nanocellulose

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1009 ◽  
Author(s):  
Jianxiao Lu ◽  
Chuanyue Sun ◽  
Kexin Yang ◽  
Kaili Wang ◽  
Yingyi Jiang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Thermogravimetric Analysis ◽  
Thermodynamic Properties ◽  
Composite Film ◽  
Polylactic Acid ◽  
Tensile Modulus ◽  
The Poor ◽  
Thermal Stability Of

Polylactic acid (PLA) is one of the most promising bio-based materials, but its inherent hydrophobicity limits its application. Although nanocellulose (NCC) is a desirable reinforcement for PLA, the poor interface compatibility between the two has been a challenge. In this work, hydroxyapatite (HAP) modified NCC was prepared, and the obtained NCC/HAP reinforcement was used to prepare PLA/NCC-HAP composites. Different ratios of NCC to HAP were studied to explore their effects on the mechanical and thermodynamic properties of the composites. When the ratio of NCC to HAP was 30/70, the tensile strength and tensile modulus of the composite film reached 45.6 MPa and 2.34 GPa, respectively. Thermogravimetric analysis results indicate that thermal stability of the composites was significantly improved compared with pure PLA, reaching 346.6 °C. The above revelations show that NCC/HAP significantly improved the interface compatibility with PLA matrix.

Thermomechanical Study and Thermal Behavior of Plasticized Poly(Lactic Acid) Nanocomposites

2021 ◽  
Vol 317 ◽  
pp. 333-340
Author(s):  
Mohammed Zorah ◽  
Izan Roshawaty Mustapa ◽  
Norlinda Daud ◽  
Nahida Jumah ◽  
Nur Ain Syafiqah Sudin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Lactic Acid ◽  
Thermal Behavior ◽  
Food Packaging ◽  
Mechanical Performance ◽  
Poly Lactic Acid ◽  
Solvent Casting ◽  
Thermal And Mechanical Properties ◽  
Hot Press

Poly (lactic acid) (PLA) is a useful alternative to petrochemical commodity material used in such as in food packaging industries. Due to its inherent brittleness, low thermal stability, and poor crystallization, it needs to improve its properties, namely in terms of thermal and mechanical performance. The plasticized PLA composites reinforced with nanofiller were prepared by solvent casting and hot press methods. Thermal and mechanical properties, as well as the crystallinity study of these nanocomposites, were investigated to study the effect of tributyl citrate (TBC) and TiO2 on the PLA composites. The addition of TBC improved the flexibility and crystallinity of the composites. Reinforcement of TiO2 was found as a practical approach to improve the mechanical properties, thermal stability, and enhanced crystalline ability for plasticized PLA nanocomposites. Based on the results achieved in this study, the composite with 3.5% nanofiller (pPLATi3.5) presented the optimum set of mechanical properties and improved thermal stability.

Developing self-healable and antibacterial polyacrylate coatings with high mechanical strength through crosslinking by multi-amine hyperbranched polysiloxane via dynamic vinylogous urethane

2017 ◽  
Vol 5 (32) ◽  
pp. 16889-16897 ◽  
Author(s):  
Youhao Zhang ◽  
Li Yuan ◽  
Qingbao Guan ◽  
Guozheng Liang ◽  
Aijuan Gu
Keyword(s):  
Tensile Strength ◽  
Mechanical Strength ◽  
Self Healing ◽  
High Tensile Strength ◽  
High Mechanical Strength ◽  
Antibacterial Ability ◽  
Healing Efficiency ◽  
Hyperbranched Polysiloxane

A novel multi-functional polyacrylate coating simultaneously showing high tensile strength, good reversible self-healing efficiency and remarkable antibacterial ability has been developed.

Eco-friendly synthesis of biodegradable and high strength ternary blend films of PVA/starch/pectin: Mechanical, thermal and biodegradation studies

2020 ◽  
pp. 096739112097288
Author(s):  
Sohan Lal ◽  
Vinod Kumar ◽  
Sanjiv Arora
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Tensile Properties ◽  
Food Packaging ◽  
Corn Starch ◽  
Plastic Material ◽  
Ternary Blend ◽  
Cross Linking ◽  
Elongation At Break ◽  
Blend Films

The present study described reduces of plastic based non-biodegradable food packaging material and sustainability toward the environmental protection. The polyvinyl alcohol (PVA) based ternary blend biodegradable films with bio-materials (corn starch and pectin) in ratio 1:5, 1:2, 1:1 and 2:1 were synthesized by solution casting method in water as a solvent to improve the tensile strength, high % elongation at break, and sustained packaging properties. Citric acid and glycerol were used for cross-linking and plasticizing purposes which are also bio-degradable and non-toxic. Blend films were characterized by FTIR and checked out the cross-linking of different components. The dispersion of contents in films was analyzed by SEM images. Thermal stability and degradation behavior of casted films were studied with thermogravimetry and thermal stability increased in blends as compared to neat PVA film. Biodegradability of cast films was also checked by Soil Burial method and bio-degradation increased with time i.e. almost 50% degrades in 30 days and 68% after 90 days. Tensile properties of blend films were tested and found that tensile strength (18.85 MPa) and elongation at break (516%) are high in blend films as compared with neat PVA film (12.04 MPa, 170%). The films are eco-friendly and biodegradable, might be a replacement of plastic material in food packaging having improved tensile properties.

Sign in / Sign up

Export Citation Format

Share Document