α-Cellulose-Based Films: Effect of Sodium Lignosulfonate (SLS) Incorporation on Physicochemical and Antibacterial Performance

2021 ◽  
Author(s):  
Xinyu Lu ◽  
Han Que ◽  
Haoquan Guo ◽  
Chenrong Ding ◽  
Xu Liu ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Hydrogen Bonds ◽  
Composite Film ◽  
Raw Materials ◽  
Mixed System ◽  
Cellulose Film ◽  
Sodium Lignosulfonate ◽  
Pure Cellulose ◽  
Antibacterial Performance

Abstract A homogeneous α-cellulose film was prepared by regeneration method from ZnCl2/CaCl2/cellulose mixed system and was further combined with sodium lignosulfonate (SLS) by crosslinking through interaction hydrogen bonds and “bridge linkages”. The physicochemical and antibacterial performance of films were all investigated and results showed that modified films exhibited stronger tensile strength, higher thermal stability, lower hydrophilic effect, better UV shielding as compared with those of pure cellulose film, and especially, better antibacterial ability derived from the presence of phenolic and sulfonate groups in SLS. This study proposed a simple and sustainable method for fabricating a multifunctional and environmentally friendly composite film by using two main lignocellulose resources as raw materials.

scholarly journals Fabrication and Characterization of Composite Biofilm of Konjac Glucomannan/Sodium Lignosulfonate/ε-Polylysine with Reinforced Mechanical Strength and Antibacterial Ability

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3367
Author(s):  
Xiaowei Xu ◽  
Jie Pang
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Mechanical Strength ◽  
Composite Film ◽  
Food Packaging ◽  
Mechanical Performance ◽  
Konjac Glucomannan ◽  
Potential Candidate ◽  
Sodium Lignosulfonate ◽  
Antibacterial Ability

In order to enforce the mechanical strength and antibacterial ability of biofilm and explore the underlying mechanism, sodium lignosulfonate (SL) and ε-polylysine (ε-PL) were introduced to fabricate the composite film of konjac glucomannan (KGM)/SL/ε-PL in the present study. According to our previous method, 1% (w/v) of KGM was the optimal concentration for the film preparation method, on the basis of which the amount of SL and ε-PL were screened by mechanical properties enforcement of film. The structure, mechanical performance and thermal stability of the film were characterized by SEM, FTIR, TGA and tensile strength tests. The optimized composite film was comprised of KGM 1% (w/v), SL 0.2% (w/v), and ε-PL 0.375% (w/v). The tensile strength (105.97 ± 4.58 MPa, p < 0.05) and elongation at break (95.71 ± 5.02%, p < 0.05) of the KGM/SL/ε-PL composite film was greatly improved compared with that of KGM. Meanwhile, the thermal stability and antibacterial property of film were also enhanced by the presence of SL and ε-PL. In co-culturation mode, the KGM/SL/ε-PL composite film showed good inhibitory effect on Escherichia coli (22.50 ± 0.31 mm, p < 0.05) and Staphylococcus aureus (19.69 ± 0.36 mm, p < 0.05) by determining the inhibition zone diameter. It was revealed that KGM/SL/ε-PL composite film shows enhanced mechanical strength and reliable antibacterial activities and it could be a potential candidate in the field of food packaging.

The Preparation and Property Research on Laponite-Poly (L-Lactide) Composite Film

2013 ◽  
Vol 750-752 ◽  
pp. 1919-1923 ◽  
Author(s):  
Guo Xian Zhou ◽  
Ming Wei Yuan ◽  
Lin Jiang ◽  
Ming Long Yuan ◽  
Hong Li Li
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Composite Film ◽  
Composite Films ◽  
Complexing Agent ◽  
Solution Blending ◽  
Method Of Solution ◽  
Thermal Stability Of ◽  
Scanning Electron

The laponite-poly (L-lactide) composite films are prepared by the method of solution blending with polylactide (PLA) and laponite. The result shows that the homogeneous and smooth composite film is prepared with 1, 4-dioxane. Thermogravimetry analysis (TG) and tensile strength studies demonstrate that the thermal stability and tensile strength are improved with the laponite added. The scanning electron microscopy (SEM) measurement indicates that the pores of composite films get uniform and network structure is more and more compact with compared to pure PLA film. The present study reveals that the laponite as a complexing agent can improve the mechanical properties and thermal stability of PLA.

Properties of PANI-PVA Composite Film

2011 ◽  
Vol 284-286 ◽  
pp. 253-256 ◽  
Author(s):  
Xiao Hua Wang ◽  
Ming Nie
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Composite Film ◽  
Matrix Effects ◽  
Drying Temperature ◽  
Thermal Stability Of

The polyaniline(PANI)-poly(vinyl alcoho1)(PVA) composite film doped with HC1 was prepared with PVA as matrix. Effects of PVA content, film drying temperature on properties of PANI-PVA composite film were studied. Tensile strength, elasticity, conductivity and thermal stability of PVA, HC1-PANI or PANI-PVA were compared. Tensile strength and elasticity of PVA film were the largest, its conductivity was the least. The conductivity of PANI-PVA was the largest, tensile strength and elasticity of PANI-PVA are bigger than those of HC1-PANI. The order of their thermal stability is PVA> HC1-PANI > PANI-PVA before 260°C, the order of their thermal stability is HC1-PANI>PANI-PVA> PVA after 260°C.

scholarly journals Properties of Polylactic Acid Reinforced by Hydroxyapatite Modified Nanocellulose

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1009 ◽  
Author(s):  
Jianxiao Lu ◽  
Chuanyue Sun ◽  
Kexin Yang ◽  
Kaili Wang ◽  
Yingyi Jiang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Thermogravimetric Analysis ◽  
Thermodynamic Properties ◽  
Composite Film ◽  
Polylactic Acid ◽  
Tensile Modulus ◽  
The Poor ◽  
Thermal Stability Of

Polylactic acid (PLA) is one of the most promising bio-based materials, but its inherent hydrophobicity limits its application. Although nanocellulose (NCC) is a desirable reinforcement for PLA, the poor interface compatibility between the two has been a challenge. In this work, hydroxyapatite (HAP) modified NCC was prepared, and the obtained NCC/HAP reinforcement was used to prepare PLA/NCC-HAP composites. Different ratios of NCC to HAP were studied to explore their effects on the mechanical and thermodynamic properties of the composites. When the ratio of NCC to HAP was 30/70, the tensile strength and tensile modulus of the composite film reached 45.6 MPa and 2.34 GPa, respectively. Thermogravimetric analysis results indicate that thermal stability of the composites was significantly improved compared with pure PLA, reaching 346.6 °C. The above revelations show that NCC/HAP significantly improved the interface compatibility with PLA matrix.

Preparation and Characterization of Cellulose/Modified Nano-SiO2 Composites Packaging Films by NMMO Technology

2011 ◽  
Vol 233-235 ◽  
pp. 1162-1166 ◽  
Author(s):  
Feng Jun Wang ◽  
Jian Qing Wang ◽  
Mei Xu
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Water Vapor ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Elongation At Break ◽  
Packaging Films ◽  
Pure Cellulose ◽  
Cellulose Composites

Cellulose-based composites packaging films containing various amounts of modified nano-SiO2 were prepared by utilizing hardwood pulps as natural cellulose resource through NMMO-technology to improve the mechanical properties, permeability for oxygen and water vapor etc. The tensile strength, elongation at break, thermal stability and permeability of the cellulose composites films as a function of the content of modified nano-SiO2 were studied. The investigation suggested that the capabilities of composites films with 2 wt.% modified nano-SiO2 added were improved largely, compared to pure cellulose films, when the diameter of particles is 30nm. The tensile strength was increased from 8.95 to 17.37 MPa and the elongation at break of the cellulose composites films was improved from 41.11% to 58.34%. The composites films with rational mechanical properties have adjustable oxygen permeability (7.90×10-15-72.18×10-15 cm3·cm/cm2·s·Pa) and water vapor permeability (7.12×10-13-5.32×10-13g·cm/cm2·s·Pa). And thermal stability of the composites films was advanced through adding modified nano-SiO2.

scholarly journals Study on the Preparation of Ionic Liquid Doped Chitosan/Cellulose-Based Electroactive Composites

2019 ◽  
Vol 20 (24) ◽  
pp. 6198
Author(s):  
Fang Wang ◽  
Chong Xie ◽  
Liying Qian ◽  
Beihai He ◽  
Junrong Li
Keyword(s):  
Ionic Liquid ◽  
Composite Film ◽  
Young’S Modulus ◽  
Water Retention ◽  
Young's Modulus ◽  
Cellulose Film ◽  
Electroactive Materials ◽  
Deformation Amplitude ◽  
Pure Cellulose ◽  
Cellulose Composite

Electro-actuated polymer (EAP) can change its shape or volume under the action of an external electric field and shows similar behavioral characteristics with those of biological muscles, and so it has good application prospects in aerospace, bionic robots, and other fields. The properties of cellulose-based electroactive materials are similar to ionic EAP materials, although they have higher Young’s modulus and lower energy consumption. However, cellulose-based electroactive materials have a more obvious deficiency—their actuation performance is often more significantly affected by ambient humidity due to the hygroscopicity caused by the strong hydrophilic structure of cellulose itself. Compared with cellulose, chitosan has good film-forming and water retention properties, and its compatibility with cellulose is very excellent. In this study, a chitosan/cellulose composite film doped with ionic liquid, 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac), was prepared by co-dissolution and regeneration process using [EMIM]Ac as the solvent. After that, a conductive polymer, poly(3,4-ethylenedioxythiophene)/poly (styrene sulfonate) (PEDOT: PSS), was deposited on the surface of the resulted composite, and then a kind of cellulose-based electroactive composites were obtained. The results showed that the end bending deformation amplitude of the resulted material was increased by 2.3 times higher than that of the pure cellulose film under the same conditions, and the maximum deformation amplitude reached 7.3 mm. The tensile strength of the chitosan/cellulose composite film was 53.68% higher than that of the cellulose film, and the Young’s modulus was increased by 72.52%. Furthermore, in comparison with the pure cellulose film, the water retention of the composite film increased and the water absorption rate decreased obviously, which meant that the resistance of the material to changes in environmental humidity was greatly improved.

Mechanical Properties of Graphene Oxide/Polyvinyl Alcohol Composite Film

2017 ◽  
Vol 25 (1) ◽  
pp. 11-16 ◽  
Author(s):  
Tao Cheng-an ◽  
Zhang Hao ◽  
Wang Fang ◽  
Zhu Hui ◽  
Zou Xiaorong ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Graphene Oxide ◽  
Hydrogen Bonds ◽  
Polyvinyl Alcohol ◽  
Composite Film ◽  
Functional Groups ◽  
Failure Strain ◽  
Oh Groups ◽  
Enhancement Mechanism

Graphene oxide (GO) was served as mechanical strengthening to prepare GO/Polyvinyl Alcohol(PVA) composite film. This was accomplished in order to explore the influence of contents of GO on the tensile strength and failure strain of GO/PVA composite film. The results showed that as the GO content increased, the tensile strength of the composite film became greater rapidly at first, and then decreased gradually. When the GO content was 20%, the film had its maximum tensile strength (59.6 MPa). This is over 500% of the tensile strength of pure PVA film. The failure strain of GO/PVA composite film decreased rapidly as the GO content increased. The enhancement mechanism of the composite can be explained by the existence of multi-hydrogen bonds between the hydroxyl (-OH) groups of PVA and oxygen-containing functional groups of GO.

scholarly journals The Effects of Coupling Agents on the Properties of Polyimide/Nano-Al2O3Three-Layer Hybrid Films

2010 ◽  
Vol 2010 ◽  
pp. 1-5 ◽  
Author(s):  
Lizhu Liu ◽  
Ling Weng ◽  
Yuxia Song ◽  
Lin Gao ◽  
Qingquan Lei
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Composite Film ◽  
Breakdown Strength ◽  
Composite Films ◽  
Coupling Agents ◽  
Hybrid Films ◽  
Mechanical Method ◽  
Elongation At Break

PI/nano-Al2O3hybrid films were prepared by ultrasonic-mechanical method. Before addition, nano-Al2O3particles were firstly modified with different coupling agents. The micromorphology, thermal stability, mechanical properties, and electric breakdown strength of hybrid films were characterized and investigated. Results indicated that nano-Al2O3particles were homogeneously dispersed in the PI matrix by the addition of coupling agents. The thermal stability and mechanical properties of PI/nano-Al2O3composite films with KH550 were the best. The tensile strength and elongation at break of PI composite film were 119.1 MPa and 19.1%, which were 14.2% and 78.5% higher than unmodified PI composite film, respectively.

Preparation of Lignosulfonate-Chitosan Polyelectrolyte Complex

2011 ◽  
Vol 197-198 ◽  
pp. 1249-1252 ◽  
Author(s):  
Chun Hai Wang ◽  
Gui Zhen Fang ◽  
Qing Ai ◽  
Yin Feng Zhao
Keyword(s):  
Thermal Stability ◽  
Thermal Decomposition ◽  
Polyelectrolyte Complex ◽  
Raw Materials ◽  
Decomposition Temperature ◽  
Thermal Decomposition Temperature ◽  
Amino Groups ◽  
Sodium Lignosulfonate ◽  
Electrostatic Adsorption ◽  
Thermal Stability Of

Sodium lignosulfonate -chitosan (SLS-CS) polyelectrolyte complex was prepared by alkaline lignin and chitosan as raw materials. The structure and thermal stability of SLS-CS polyelectrolyte were characterized by FTIR, XRD, DSC. The results indicated that NH3+was formed by the protonated amino groups of chitosan and then came into SLS-CS polyelectrolyte complex with -SO3Na of sodium lignosulfonate through electrostatic adsorption. Compared with the sodium lignosulfonate and chitosan, the thermal decomposition temperature of SLS-CS raised and thus improved the thermal stability; the amorphous peak tends to decrease; SLS-CS polymer arrangement appeared more ordering, and the molecular interaction were enhanced.

PEMANFAATAN LIMBAH KULIT DURIAN (Durio zibethinus) DAN KULIT CEMPEDAK (Artocarpus integer) SEBAGAI EDIBLE FILM

2014 ◽  
Vol 6 (1) ◽  
pp. 27 ◽  
Author(s):  
Desi Mustika Amaliyah
Keyword(s):  
Tensile Strength ◽  
Food Packaging ◽  
Raw Materials ◽  
Edible Films ◽  
Edible Film ◽  
Durio Zibethinus ◽  
Yield Result ◽  
Pre Treatment

Durian (Durio zibethinus) and cempedak (Artocarpus integer) peels waste are not used by the society. The research aim is to extract pectin from durian and cempedak peels and to formulate the pectin into edible films for food packaging. The research stages were first pre-treatment of durian and cempedak peels, pectin extraction, pectin drying, and  pectin application as edible films with concentration of 0%, 5%, and 15%. Based on this research it was concluded that pectin can be extracted from durian and cempedak peels with yield result of 27.97 % and 55.58 %, respectively. Edible film obtained has  similar characteristics between raw materials cempedak and durian peels. The higher concentration of cempedak peel  pectin increased the thickness, but decreased the tensile strength and elongation at a concentration of 15%. While in edible films from durian peel pectin, the higher concentration of pectin decreased the thickness of edible film on pectin concentration of 15%, lowered tensile strength and raised the edible film elongation.Keywords: waste, durian, cempedak, pectin extraction, edible film

Sign in / Sign up

Export Citation Format

Share Document