scholarly journals Epitaxial Graphene Sensors Combined with 3D-Printed Microfluidic Chip for Heavy Metals Detection

Sensors ◽  
2019 ◽  
Vol 19 (10) ◽  
pp. 2393 ◽  
Author(s):  
Maria Francesca Santangelo ◽  
Ivan Shtepliuk ◽  
Daniel Filippini ◽  
Donatella Puglisi ◽  
Mikhail Vagin ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Density Functional ◽  
Topological Analysis ◽  
Decomposition Analysis ◽  
Epitaxial Graphene ◽  
Phase Detection ◽  
Lab On Chip ◽  
Covalent Interaction ◽  
3D Printed ◽  
On Chip

In this work, we investigated the sensing performance of epitaxial graphene on Si-face 4H-SiC (EG/SiC) for liquid-phase detection of heavy metals (e.g., Pb and Cd), showing fast and stable response and low detection limit. The sensing platform proposed includes 3D-printed microfluidic devices, which incorporate all features required to connect and execute lab-on-chip (LOC) functions. The obtained results indicate that EG exhibits excellent sensing activity towards Pb and Cd ions. Several concentrations of Pb2+ solutions, ranging from 125 nM to 500 µM, were analyzed showing Langmuir correlation between signal and Pb2+ concentrations, good stability, and reproducibility over time. Upon the simultaneous presence of both metals, sensor response is dominated by Pb2+ rather than Cd2+ ions. To explain the sensing mechanisms and difference in adsorption behavior of Pb2+ and Cd2+ ions on EG in water-based solutions, we performed van-der-Waals (vdW)-corrected density functional theory (DFT) calculations and non-covalent interaction (NCI) analysis, extended charge decomposition analysis (ECDA), and topological analysis. We demonstrated that Pb2+ and Cd2+ ions act as electron-acceptors, enhancing hole conductivity of EG, due to charge transfer from graphene to metal ions, and Pb2+ ions have preferential ability to binding with graphene over cadmium. Electrochemical measurements confirmed the conductometric results, which additionally indicate that EG is more sensitive to lead than to cadmium.

scholarly journals Epitaxial Graphene Sensors Combined with 3D Printed Microfluidic Chip for Heavy Metals Detection

Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 982 ◽  
Author(s):  
Maria Francesca Santangelo ◽  
Ivan Shtepliuk ◽  
Donatella Puglisi ◽  
Daniel Filippini ◽  
Rositsa Yakimova ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Microfluidic Chip ◽  
Chemical Interaction ◽  
High Sensitivity ◽  
Epitaxial Graphene ◽  
Phase Detection ◽  
Lab On Chip ◽  
Sensing Platform ◽  
3D Printed ◽  
On Chip

Two-dimensional materials may constitute key elements in the development of a sensing platform where extremely high sensitivity is required, since even minimal chemical interaction can generate appreciable changes in the electronic state of the material. In this work, we investigate the sensing performance of epitaxial graphene on Si-face 4H-SiC (EG/SiC) for liquid-phase detection of heavy metals (e.g., Pb). The integration of preparatory steps needed for sample conditioning is included in the sensing platform, exploiting fast prototyping using a 3D printer, which allows direct fabrication of a microfluidic chip incorporating all the features required to connect and execute the Lab-on-chip (LOC) functions. It is demonstrated that interaction of Pb2+ ions in water-based solutions with the EG enhances its conductivity exhibiting a Langmuir correlation between signal and Pb2+ concentration. Several concentrations of Pb2+ solutions ranging from 125 nM to 500 µM were analyzed showing good stability and reproducibility over time.

scholarly journals 3D Printed Electrophoretic Lab-on-chip for DNA Separation

2016 ◽  
Vol 168 ◽  
pp. 1454-1457 ◽  
Author(s):  
K. Adamski ◽  
W. Kubicki ◽  
R. Walczak
Keyword(s):  
Dna Separation ◽  
Lab On Chip ◽  
3D Printed ◽  
On Chip

scholarly journals Hybrid 3D printed-paper microfluidics

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Arthur Zargaryan ◽  
Nathalie Farhoudi ◽  
George Haworth ◽  
Julian F. Ashby ◽  
Sam H. Au
Keyword(s):  
Point Of Care ◽  
Paper Microfluidics ◽  
Point Of Care Testing ◽  
Lab On Chip ◽  
Fluid Handling ◽  
Paper Based Microfluidics ◽  
Specialized Equipment ◽  
3D Printed ◽  
On Chip ◽  
Hybrid Devices

Abstract 3D printed and paper-based microfluidics are promising formats for applications that require portable miniaturized fluid handling such as point-of-care testing. These two formats deployed in isolation, however, have inherent limitations that hamper their capabilities and versatility. Here, we present the convergence of 3D printed and paper formats into hybrid devices that overcome many of these limitations, while capitalizing on their respective strengths. Hybrid channels were fabricated with no specialized equipment except a commercial 3D printer. Finger-operated reservoirs and valves capable of fully-reversible dispensation and actuation were designed for intuitive operation without equipment or training. Components were then integrated into a versatile multicomponent device capable of dynamic fluid pathing. These results are an early demonstration of how 3D printed and paper microfluidics can be hybridized into versatile lab-on-chip devices.

scholarly journals Deciphering the Mechanism of Silver Catalysis of “Click” Chemistry in Water by Combining Experimental and MEDT Studies

Catalysts ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 956
Author(s):  
Hicham Ben El Ayouchia ◽  
Lahoucine Bahsis ◽  
Ismail Fichtali ◽  
Luis R. Domingo ◽  
Mar Ríos-Gutiérrez ◽  
...  
Keyword(s):  
Click Chemistry ◽  
Density Functional ◽  
Reaction Pathway ◽  
Topological Analysis ◽  
Intramolecular Interactions ◽  
Stationary Points ◽  
Ionic Character ◽  
Energy Barriers ◽  
Covalent Interaction ◽  
Mechanistic Pathway

A combined experimental study and molecular electron density theory (MEDT) analysis was carried out to investigate the click of 1,2,3-triazole derivatives by Ag(I)-catalyzed azide-alkyne cycloaddition (AgAAC) reaction as well as its corresponding mechanistic pathway. Such a synthetic protocol leads to the regioselective formation of 1,4-disubstituted-1,2,3-triazoles in the presence of AgCl as catalyst and water as reaction solvent at room temperature and pressure. The MEDT was performed by applying Density Functional Theory (DFT) calculations at both B3LYP/6-31G(d,p) (LANL2DZ for Ag) and ωB97XD/6-311G(d,p) (LANL2DZ for Ag) levels with a view to decipher the observed regioselectivity in AgAAC reactions, and so to set out the number of silver(I) species and their roles in the formation of 1,4-disubstituted-1,2,3-triazoles. The comparison of the values of the energy barriers for the mono- and dinuclear Ag(I)-acetylide in the AgAAC reaction paths shows that the calculated energy barriers of dinuclear processes are smaller than those of the mononuclear one. The type of intramolecular interactions in the investigated AgAAC click chemistry reaction accounts for the regioselective formation of the 1,4-regiosisomeric triazole isomer. The ionic character of the starting compounds, namely Ag-acetylide, is revealed for the first time. This finding rules out any type of covalent interaction, involving the silver(I) complexes, along the reaction pathway. Electron localization function (ELF) topological analysis of the electronic structure of the stationary points reaffirmed the zw-type (zwitterionic-type) mechanism of the AgAAC reactions.

scholarly journals Understanding the regio-and diastereoselective synthesis of a potent antinociceptive isoxazolidine from C-(pyridin-3-yl)-N-phenylnitrone in the light of molecular electron density theory

2020 ◽  
Vol 85 (6) ◽  
pp. 765-779
Author(s):  
Nivedita Acharjee
Keyword(s):  
Electron Density ◽  
Density Functional ◽  
Topological Analysis ◽  
Transition States ◽  
Cycloaddition Reaction ◽  
Aim Analysis ◽  
Conceptual Density Functional Theory ◽  
Covalent Interaction ◽  
Molecular Electron ◽  
Molecular Electron Density Theory

[3+2] cycloaddition reaction of C-(pyridin-3-yl)-N-phenylnitrone and 2-propen-1-ol yields stereochemically defined potent antinociceptive isoxazolidine derivative. Computational quantum calculations (CQC) are performed for this synthesis to predict the polar character, mechanism and selectivity within the framework of molecular electron density theory (MEDT). Topological analysis of the electron localization function (ELF) classifies the nitrone as a zwitter-ionic(zw-) type three atom component (TAC) showing absence of any pseudoradical or carbenoid centre. Four reaction channels corresponding to the possible regio- and stereoselective pathways are studied at DFT/ /B3LYP/6-311G(d,p) level of theory. The reaction follows one-step mechanism with asynchronous transition states and the computed activation energies agree well with experimental data. The reaction can be differentiated into nine ELF topological phases, with faster C?C bond formation. Global electron density theory (GEDT) at the favoured transition state and conceptual density functional theory (CDFT) indices at the ground state of the reagents indicate non-polar character. Non-covalent interactions are predicted by atoms-in-molecules (AIM) analysis and non-covalent interaction (NCI) plots at the transition states.

scholarly journals 2-Aminobenzothiazole-Containing Copper(II) Complex as Catalyst in Click Chemistry: An Experimental and Theoretical Study

Catalysts ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 776
Author(s):  
Lahoucine Bahsis ◽  
Meryem Hrimla ◽  
Hicham Ben El Ayouchia ◽  
Hafid Anane ◽  
Miguel Julve ◽  
...  
Keyword(s):  
Click Chemistry ◽  
Density Functional ◽  
Topological Analysis ◽  
Biological Properties ◽  
Cycloaddition Reactions ◽  
Triazole Derivatives ◽  
Covalent Interaction ◽  
Heterocyclic Ligand ◽  
Copper Acetylide ◽  
Ionic Nature

The reaction of copper(II) acetate with the 2-aminobenzothiazole (abt) heterocycle affords the new copper(II) complex of formula [Cu(abt)2(OOCCH3)2] (1) in a straightforward manner. Compound 1 served as a precatalyst for azide/alkyne cycloaddition reactions (CuAAC) in water, leading to 1,4-disubstituted-1,2,3-triazole derivatives in a regioselective manner and with excellent yields at room temperature. The main advantages of the coordination of such a heterocyclic ligand in 1 are its strong σ-donating ability (N-Cu), nontoxicity and biological properties. In addition, the click chemistry reaction conditions using 1 allow the formation of a great variety of 1,2,3-triazole-based heterocyclic compounds that make this protocol potentially relevant from biological and sustainable viewpoints. A molecular electron density theory (MEDT) study was performed by using density functional theory (DFT) calculations at the B3LYP/6-31G(d,p) (LANL2DZ for Cu) level to understand the observed regioselectivity in the CuAAC reaction. The intramolecular nature of this reaction accounts for the regioselective formation of the 1,4-regioisomeric triazole derivatives. The ionic nature of the starting copper-acetylide precludes any type of covalent interaction throughout the reaction, as supported by the electron localization function (ELF) topological analysis, reaffirming the zwitterionic-type (zw-type) mechanism of the copper(I)/aminobenzothiazole-catalysed azide-alkyne cycloaddition reactions.

Vapour Pressure Isotope Effect on Evaporation from Pure Organic Phases - a PIMD Approach

2020 ◽  
Author(s):  
Luis Vasquez ◽  
Agnieszka Dybala-Defratyka
Keyword(s):  
Path Integral ◽  
Vapour Pressure ◽  
Density Functional ◽  
Isotope Effects ◽  
Tight Binding ◽  
Decomposition Analysis ◽  
Energy Decomposition Analysis ◽  
Special Importance ◽  
Non Covalent Interactions ◽  
Covalent Interactions

<p></p><p>Very often in order to understand physical and chemical processes taking place among several phases fractionation of naturally abundant isotopes is monitored. Its measurement can be accompanied by theoretical determination to provide a more insightful interpretation of observed phenomena. Predictions are challenging due to the complexity of the effects involved in fractionation such as solvent effects and non-covalent interactions governing the behavior of the system which results in the necessity of using large models of those systems. This is sometimes a bottleneck and limits the theoretical description to only a few methods.<br> In this work vapour pressure isotope effects on evaporation from various organic solvents (ethanol, bromobenzene, dibromomethane, and trichloromethane) in the pure phase are estimated by combining force field or self-consistent charge density-functional tight-binding (SCC-DFTB) atomistic simulations with path integral principle. Furthermore, the recently developed Suzuki-Chin path integral is tested. In general, isotope effects are predicted qualitatively for most of the cases, however, the distinction between position-specific isotope effects observed for ethanol was only reproduced by SCC-DFTB, which indicates the importance of using non-harmonic bond approximations.<br> Energy decomposition analysis performed using the symmetry-adapted perturbation theory (SAPT) revealed sometimes quite substantial differences in interaction energy depending on whether the studied system was treated classically or quantum mechanically. Those observed differences might be the source of different magnitudes of isotope effects predicted using these two different levels of theory which is of special importance for the systems governed by non-covalent interactions.</p><br><p></p>

On the Nature of Halide-Water Interactions: Insights from Many-Body Representations and Density Functional Theory

2019 ◽  
Author(s):  
Brandon B. Bizzarro ◽  
Colin K. Egan ◽  
Francesco Paesani
Keyword(s):  
Density Functional Theory ◽  
Charge Transfer ◽  
Molecular Orbital ◽  
Density Functional ◽  
Decomposition Analysis ◽  
Orbital Energy ◽  
Energy Decomposition Analysis ◽  
Interaction Energies ◽  
Many Body ◽  
Functional Theory

<div> <div> <div> <p>Interaction energies of halide-water dimers, X<sup>-</sup>(H<sub>2</sub>O), and trimers, X<sup>-</sup>(H<sub>2</sub>O)<sub>2</sub>, with X = F, Cl, Br, and I, are investigated using various many-body models and exchange-correlation functionals selected across the hierarchy of density functional theory (DFT) approximations. Analysis of the results obtained with the many-body models demonstrates the need to capture important short-range interactions in the regime of large inter-molecular orbital overlap, such as charge transfer and charge penetration. Failure to reproduce these effects can lead to large deviations relative to reference data calculated at the coupled cluster level of theory. Decompositions of interaction energies carried out with the absolutely localized molecular orbital energy decomposition analysis (ALMO-EDA) method demonstrate that permanent and inductive electrostatic energies are accurately reproduced by all classes of XC functionals (from generalized gradient corrected (GGA) to hybrid and range-separated functionals), while significant variance is found for charge transfer energies predicted by different XC functionals. Since GGA and hybrid XC functionals predict the most and least attractive charge transfer energies, respectively, the large variance is likely due to the delocalization error. In this scenario, the hybrid XC functionals are then expected to provide the most accurate charge transfer energies. The sum of Pauli repulsion and dispersion energies are the most varied among the XC functionals, but it is found that a correspondence between the interaction energy and the ALMO EDA total frozen energy may be used to determine accurate estimates for these contributions. </p> </div> </div> </div>

Sign in / Sign up

Export Citation Format

Share Document