scholarly journals Evaluation of the Accuracy of Different PV Estimation Models and the Effect of Dust Cleaning: Case Study a 103 MW PV Plant in Jordan

2022 ◽  
Vol 14 (2) ◽  
pp. 982
Author(s):  
Loiy Al-Ghussain ◽  
Moath Abu Subaih ◽  
Andres Annuk
Keyword(s):  
Energy Production ◽  
Empirical Models ◽  
Wind Effect ◽  
Estimation Model ◽  
Levelized Cost Of Electricity ◽  
The Standard Model ◽  
The Common ◽  
And Performance ◽  
Identical Performance

The estimation of PV production has been widely investigated previously, where many empirical models have been proposed to account for wind and soiling effects for specific locations. However, the performance of these models varies among the investigated sites. Hence, it is vital to assess and evaluate the performance of these models and benchmark them against the common PV estimation model that accounts only for the ambient temperature. Therefore, this study aims to evaluate the accuracy and performance of four empirical wind models considering the soiling effect, and compare them to the standard model for a 103 MW PV plant in Jordan. Moreover, the study investigates the effect of cleaning frequency on the annual energy production and the plant’s levelized cost of electricity (LCOE). The results indicate almost identical performance for the adopted models when comparing the actual energy production with R2 and RMSE (root mean square error) ranges of 0.93–0.98 and 0.93–1.56 MWh for both sub-plants, with a slight superiority of the models that incorporate wind effect. Finally, it is recommended in this study to clean the PV panels every two weeks instead of every three months, which would increase annual energy production by 4%, and decrease the LCOE by 5% of the two PV sub-plants.

Theoretizing A New Sustainable Business Event: Extension of Mair and Jago Model

2015 ◽  
Vol 3 (2) ◽  
pp. 55
Author(s):  
Norol Hamiza Zamzuri ◽  
Khairil Wahidin Awang ◽  
Yuhanis Abdul Aziz ◽  
Zaiton Samdin
Keyword(s):  
Social Impact ◽  
Geographical Area ◽  
Infrastructure Development ◽  
Structured Interviews ◽  
Sustainable Business ◽  
Knowledge Resources ◽  
Business Events ◽  
And Performance ◽  
Event Based

The growth of the event sector is underpinned by the demand of organizing a business event.  Thus, it leads to an increase in economic and social impact. However, the problems from the growth of this sector potentially results from the use of several event materials, transportation and infrastructure development.  Organizing a green event is seen as one of the strategies to reduce the environmental impact.  Therefore, the aim of this paper is to explore the issues involved throughout the process of greening an event by applying Mair and Jago Model.  Semi-structured interviews were conducted with event managers from six Malaysia business event companies that encourage green practices during their event.  Findings suggest that impact, initiative, support and performance motivates event organizers in organizing a green event.  It has also been found that knowledge, resources and behaviour are the barriers faced by event organizers throughout the process of organizing a green event.  Based on the findings it appears that two important factors have emerged from the data collection and analysis that showed a deviation from the Mair and Jago Model, namely “impact” for the motivation element and “support” for the barrier element.  The main limitation of this study was the scope of the study; as it only focuses on business events.  However, as the main purpose of this study is to explore the issues of organizing a green event, it has been found that there are other issues need to be explored in other contexts and geographical area.  Apart from this, as this is a case study, it can only replicate according to the circumstances of this case study. However, this study can be generalized in terms of the theory that has emerged from it.  It is suggested that further research should explore more issues in other contexts and geographical areas. 

Methodology for Analysis of Schottky Diode Failures

2010 ◽  
Author(s):  
Bhanu P. Sood ◽  
Michael Pecht ◽  
John Miker ◽  
Tom Wanek
Keyword(s):  
Failure Mode ◽  
Schottky Diode ◽  
Failure Modes ◽  
Schottky Diodes ◽  
Failure Mechanisms ◽  
Forward Voltage ◽  
Fast Switching ◽  
Voltage Drops ◽  
The Common

Abstract Schottky diodes are semiconductor switching devices with low forward voltage drops and very fast switching speeds. This paper provides an overview of the common failure modes in Schottky diodes and corresponding failure mechanisms associated with each failure mode. Results of material level evaluation on diodes and packages as well as manufacturing and assembly processes are analyzed to identify a set of possible failure sites with associated failure modes, mechanisms, and causes. A case study is then presented to illustrate the application of a systematic FMMEA methodology to the analysis of a specific failure in a Schottky diode package.

scholarly journals Getting information on suspended sediments in a large river from acoustic backscatter

2018 ◽  
Vol 40 ◽  
pp. 04017
Author(s):  
Adrien Vergne ◽  
Céline Berni ◽  
Jérôme Le Coz
Keyword(s):  
Suspended Sediment Concentration ◽  
Spatial Information ◽  
Suspended Sediments ◽  
Sediment Concentration ◽  
Large River ◽  
Acoustic Backscatter ◽  
Qualitative Information ◽  
Sediment Size ◽  
The Common

There has been a growing interest in the last decade in extracting information on Suspended Sediment Concentration (SSC) from acoustic backscatter in rivers. Quantitative techniques are not yet effective, but acoustic backscatter already provides qualitative information on suspended sediments. In particular, in the common case of a bi-modal sediment size distribution, corrected acoustic backscatter can be used to look for sand particles in suspension and provide spatial information on their distribution throughout a river crosssection. This paper presents a case-study where these techniques have been applied.

scholarly journals Development and performance study of a natural silk fiber facial mask paper

2020 ◽  
Vol 15 ◽  
pp. 155892502097575
Author(s):  
Huiling Wang ◽  
Bin Zhou
Keyword(s):  
Silk Fiber ◽  
Entrainment Rate ◽  
Performance Study ◽  
Wet Strength ◽  
Facial Mask ◽  
Antibacterial Performance ◽  
Lower Elongation ◽  
The Common ◽  
And Performance ◽  
Acid Structure

Facial masks are beauty products which composed of a facial mask paper and beauty solution. Silk contains the amino acid structure closest to the human skin, and has the skin-friendly, cosmetic and antibacterial functions, but the common method for making nonwoven facial mask paper is not suitable for silk. In this paper, the silkworm’s spinning path is intervened manually to obtain a smart silk facial mask paper (SMC) of controllable thickness, so that the sericin on the silk fiber is well preserved. In the experiment where the SMC is compared with the nonwoven 384-cuprammonium rayon facial mask paper (CRMC) which is the most widely used in the market, it is found that the ways of forming the two facial mask paper are completely different, and therefore the morphologies under SEM are obviously different. The thickness of the SMC is 0.183 mm and the areal weight of it is 38.0 g/m2. It is very close to the CRMC (0.187 mm, 38.4 g/m2). The porosity of the SMC is 84.0%, which is slightly lower than that of the CRMC (86.3%), but its pores are well distributed. Compared with the CRMC, the smart SMC has higher dry and wet strength, lower elongation, slightly lower air permeability and liquid entrainment rate, and better antibacterial performance.

scholarly journals Co-Management of Sewage Sludge and Other Organic Wastes: A Scandinavian Case Study

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3411
Author(s):  
Clara Fernando-Foncillas ◽  
Maria M. Estevez ◽  
Hinrich Uellendahl ◽  
Cristiano Varrone
Keyword(s):  
Anaerobic Digestion ◽  
Sewage Sludge ◽  
Resource Recovery ◽  
Organic Wastes ◽  
Industrial Wastes ◽  
Wastewater Management ◽  
Sewage Sludge Management ◽  
The Common ◽  
Green Chemicals

Wastewater and sewage sludge contain organic matter that can be valorized through conversion into energy and/or green chemicals. Moreover, resource recovery from these wastes has become the new focus of wastewater management, to develop more sustainable processes in a circular economy approach. The aim of this review was to analyze current sewage sludge management systems in Scandinavia with respect to resource recovery, in combination with other organic wastes. As anaerobic digestion (AD) was found to be the common sludge treatment approach in Scandinavia, different available organic municipal and industrial wastes were identified and compared, to evaluate the potential for expanding the resource recovery by anaerobic co-digestion. Additionally, a full-scale case study of co-digestion, as strategy for optimization of the anaerobic digestion treatment, was presented for each country, together with advanced biorefinery approaches to wastewater treatment and resource recovery.

Sign in / Sign up

Export Citation Format

Share Document