Electronic system specification languages. VHDL modelling guidelines

2002 ◽  
Author(s):  
E. Rau ◽  
N. Karelin ◽  
V. Dukov ◽  
M. Kolomeytsev ◽  
S. Gavrikov ◽  
...  

There are different methods and devices for the increase of the videosignal information in SEM. For example, with the help of special pure electronic [1] and opto-electronic [2] systems equipotential areas on the specimen surface in SEM were obtained. This report generalizes quantitative universal method for space distribution representation of research specimen parameter by contour equal signal lines. The method is based on principle of comparison of information signal value with the fixed levels.Transformation image system for obtaining equal signal lines maps was developed in two versions:1)In pure electronic system [3] it is necessary to compare signal U (see Fig.1-a), which gives potential distribution on specimen surface along each scanning line with fixed base level signals εifor obtaining quantitative equipotential information on solid state surface. The amplitude analyzer-comparator gives flare sport videopulses at any fixed coordinate and any instant time when initial signal U is equal to one of the base level signals ε.


Author(s):  
W. Kunath ◽  
K. Weiss ◽  
E. Zeitler

Bright-field images taken with axial illumination show spurious high contrast patterns which obscure details smaller than 15 ° Hollow-cone illumination (HCI), however, reduces this disturbing granulation by statistical superposition and thus improves the signal-to-noise ratio. In this presentation we report on experiments aimed at selecting the proper amount of tilt and defocus for improvement of the signal-to-noise ratio by means of direct observation of the electron images on a TV monitor.Hollow-cone illumination is implemented in our microscope (single field condenser objective, Cs = .5 mm) by an electronic system which rotates the tilted beam about the optic axis. At low rates of revolution (one turn per second or so) a circular motion of the usual granulation in the image of a carbon support film can be observed on the TV monitor. The size of the granular structures and the radius of their orbits depend on both the conical tilt and defocus.


Author(s):  
О. Д. Донець ◽  
В. П. Іщук

The basic results of calculation and research works carried out in the process of creation of power unit of regional passenger airplanes’ family are given. The design features of the propulsion engines and engine of the auxiliary power plant are described. The aforementioned propulsion system includes propulsion engines D-436-148 and engine AI-450-MS of auxiliary power plant. In order to comply with the requirements of Section 4 of the ICAO standard (noise reduction of the aircraft in site), in part of ensuring the noise reduction of engines, when creating the power plant of the An-148/An-158 aircraft family, a single- and double-layer acoustic filler was used in the structure of the engine nacelle and air intake. The use of electronic system for automatic control of propulsion engines such as FADEC and its integration into the digital airborne aircraft complex ensured the operation of engines, included in the power plant provided with high specific fuel consumption, as well as increased the level of automation of the power plant control and monitoring, and ensured aircraft automation landing in ICAO category 3A. In addition, the use of the aforementioned electronic system, allowed to operate the power plant of the aircraft in accordance with technical status. The use of the AI-450-MS auxiliary power plant with an electronic control system such as FADEC, and the drive of the service compressor from a free turbine, eliminated the effect of changes in power and air takeoff, on the deviation of the engine from optimal mode, which also minimized the fuel consumption. The use of fuel metering system TIS-158, allowed to ensure control of its condition and assemblies, without the use of auxiliary devices, built-in control means. In the fire protection system, the use of the electronic control and monitor unit, as well as the use of digital serial code for the exchange of information between the elements of the system and the aircraft systems, has reduced the number of connections, which increased the reliability of the system and reduced its weight characteristics.


2011 ◽  
Vol 131 (1) ◽  
pp. 110-117
Author(s):  
Toshiji Kato ◽  
Kaoru Inoue ◽  
Yoshihiro Fujiwara

Author(s):  
Emerson da Trindade Marcelino ◽  
Júlio Mannuel Tavares Diniz ◽  
ALVARO ROCHA ◽  
Eisenhawer de Moura Fernandes ◽  
Raimundo Duarte ◽  
...  

2018 ◽  
Vol 1 ◽  
pp. 198
Author(s):  
Lusy Tunik Muharlisiani ◽  
Henny Sukrisno ◽  
Emmy Wahyuningtyas ◽  
Shofiya Syidada ◽  
Dina Chamidah

Service at the “Kelurahan” is a very important part in determining the success of development, especially in public service. The problem faced is the lack of skill level of the “Kelurahan” apparatus with the more dynamic demands of the community and the archive management system is still conventional and manual that is writing the identity of the archive into the book agenda, expedition, control card, and borrowed archive card, so it takes a more practical electronic system, effective and efficient so required to develop themselves in order to improve public services. Conventional administration and archive management must be transformed into cloud-based computing (digital), for which archiving managers should always be responsive and follow these developments and wherever possible in order to utilize for archival activities, with greater access expected archives are evidence at once able to talk about historical facts and events and be able to give meaning and benefit to human life, so archives that were only visible and readable at archival centers can now be accessed online, and even their services have led to automated service systems. Using Microsoft Access which its main function is to handle the process of data manipulation and manufacture of a system, this system is built so that the bias runs on Cloud which means Cloud itself is a paradigm in which information is permanently stored on servers on the internet and stored. The purpose of this program is the implementation of administrative management that has been based cloud computing (digital) and is expected to be a solution in managing the archive so that if it has been designed and programmed, it can be stored in the computer and benefi- cial to the “Kelurahan” apparatus and add in the field of management archives in the form of improving the quality of service to the community, can facilitate and scientific publications.


Sign in / Sign up

Export Citation Format

Share Document