Watermarking algorithm for resisting local nonlinear geometric attacks based on normed centre of gravity

2010 ◽  
Vol 30 (8) ◽  
pp. 2161-2163
Author(s):  
De-long CUI ◽  
Jing-long ZUO ◽  
Zhi-ping PENG
1989 ◽  
Vol 17 (2) ◽  
pp. 86-99 ◽  
Author(s):  
I. Gardner ◽  
M. Theves

Abstract During a cornering maneuver by a vehicle, high forces are exerted on the tire's footprint and in the contact zone between the tire and the rim. To optimize the design of these components, a method is presented whereby the forces at the tire-rim interface and between the tire and roadway may be predicted using finite element analysis. The cornering tire is modeled quasi-statically using a nonlinear geometric approach, with a lateral force and a slip angle applied to the spindle of the wheel to simulate the cornering loads. These values were obtained experimentally from a force and moment machine. This procedure avoids the need for a costly dynamic analysis. Good agreement was obtained with experimental results for self-aligning torque, giving confidence in the results obtained in the tire footprint and at the rim. The model allows prediction of the geometry and of the pressure distributions in the footprint, since friction and slip effects in this area were considered. The model lends itself to further refinement for improved accuracy and additional applications.


Author(s):  
Chauhan Usha ◽  
Singh Rajeev Kumar

Digital Watermarking is a technology, to facilitate the authentication, copyright protection and Security of digital media. The objective of developing a robust watermarking technique is to incorporate the maximum possible robustness without compromising with the transparency. Singular Value Decomposition (SVD) using Firefly Algorithm provides this objective of an optimal robust watermarking technique. Multiple scaling factors are used to embed the watermark image into the host by multiplying these scaling factors with the Singular Values (SV) of the host image. Firefly Algorithm is used to optimize the modified host image to achieve the highest possible robustness and transparency. This approach can significantly increase the quality of watermarked image and provide more robustness to the embedded watermark against various attacks such as noise, geometric attacks, filtering attacks etc.


2010 ◽  
Vol 8 (2) ◽  
pp. 803
Author(s):  
Ramli Usman ◽  
Achmad As'ad Sonief ◽  
Bambang Indrayadi

PT. Ima Montaz Sejahtera merupakan suatu Perusahaan Industri Air Minum Dalam Kemasan (AMDK) dengan merk “Mount Agua” dan perusahaan ini menghasilkan produk berupa produk gallon 19 liter, produk botol 1500 ml, produk botol 600 ml, dan produk gelas 240 ml. Pabrik PT. Ima Montaz Sejahtera memiliki dua buah gudang yaitu gudang material dan gudang produk jadi, didalam pengoperasian proses produksi banyak waktu yang terbuang untuk mengangkut material dari gudang ke mesin produksi dan ini disebabkan letak gudang material jauh dari mesin produksi dan juga dalam mengangkut material dari gudang ke mesin produksi harus melalui gudang produk jadi sehingga mengganggu aktifitas proses produksi. Metode yang digunakan pada penelitian ini menggunakan metode center of gravity yaitu menentukan titik pusat letak gudang baru berdasarkan tata letak mesin-mesin produksi.Dengan meningkatnya waktu produksi maka dengan sendirinya kapasitas produksi juga meningkat untuk produk gallon 19 liter sebesar 36 gallon per minggu (0,490 %), produk botol 1500 ml sebesar 211 karton per minggu (2,475 %), produk botol 600 ml sebesar 71 karton per minggu (1,172 %), dan produk gelas 240 ml sebesar 186 karton per minggu(0,731 %).Kata Kunci: Optimalisasi, Tata Letak Gudang, Centre of Gravity, Lay Out.


Sign in / Sign up

Export Citation Format

Share Document