scholarly journals Conjugate Effect on the Thermal Characteristics of Air Impinging Jet

CFD Letters ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 25-35
Author(s):  
Ghassan Nasif ◽  
Yasser El-Okda
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Convective Heat ◽  
Thermal Characteristics ◽  
Heat Fluxes ◽  
Conductive Heat ◽  
Stagnation Region ◽  
Jet Cooling ◽  
Air Jet ◽  
Finite Volume Approach

A computational fluid dynamics (CFD) investigation to determine the conjugate heat transfer (CHT) effect on the stagnation and local thermal characteristics due to an impinging process has been carried out in this study using STAR-CCM+ - Siemens PLM commercial code. The transient Navier-Stokes’s equations are numerically solved using a finite volume approach with k-ω SST eddy viscosity as the turbulence model. A fully developed circular air jet with different Reynolds numbers, impinging vertically onto a heated flat disc with different metals, thicknesses, and boundary heat fluxes are employed in the current study to examine the thermal characteristics and provide an enhanced picture for the convection mechanism that used in jet cooling technology. It is found that the thermal characteristics are influenced by the thermal conductivity and thickness of the target upon using air as a cooling jet. The CHT process enhances the local convective heat transfer at the fluid-solid interface due to the variation in transverse and axial conductive heat transfer inside the metal up to a certain redial extent from the stagnation region compared to the process with no CHT. The extent of the radial enhancement depends on the thermal conductivity of the metal. For a given thermal conductivity, the CHT process acts to increase the temperature and convective heat flux of the stagnation region as the metal thickness increases.

The Effect of Thermal Wall Properties on Natural Convection in Inclined Rectangular Cells

1982 ◽  
Vol 104 (1) ◽  
pp. 111-117 ◽  
Author(s):  
B. A. Meyer ◽  
J. W. Mitchell ◽  
M. M. El-Wakil
Keyword(s):  
Heat Transfer ◽  
Cell Wall ◽  
Natural Convection ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Conductive Heat ◽  
Numerical Work ◽  
Aspect Ratios ◽  
Convection Problem ◽  
Natural Convection Problem

The effects of cell wall thickness and thermal conductivity on natural convective heat transfer within inclined rectangular cells was studied. The cell walls are thin, and the hot and cold surfaces are isothermal. The two-dimensional natural convection problem was solved using finite difference techniques. The parameters studied were cell aspect ratios (A) of 0.5 and 1, Rayleigh numbers (Ra) up to 105, a Prandtl number (Pr) of 0.72 and a tilt angle (φ) of 60 deg. These parameters are of interest in solar collectors. The numerical results are substantiated by experimental results. It was found that convection coefficients for cells with adiabatic walls are substantially higher than those for cells with conducting walls. Correlations are given for estimating the convective heat transfer across the cell and the conductive heat transfer across the cell wall. These correlations are compared with available experimental and numerical work of other authors.

Pool Boiling Characteristics of Metallic Nanofluids

2011 ◽  
Vol 133 (11) ◽  
Author(s):  
K. Hari Krishna ◽  
Harish Ganapathy ◽  
G. Sateesh ◽  
Sarit K. Das
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Boiling Heat Transfer ◽  
Volume Fraction ◽  
Pool Boiling ◽  
Heat Fluxes ◽  
Solid Particles ◽  
Heater Surface ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics

Nanofluids, solid-liquid suspensions with solid particles of size of the order of few nanometers, have created interest in many researchers because of their enhancement in thermal conductivity and convective heat transfer characteristics. Many studies have been done on the pool boiling characteristics of nanofluids, most of which have been with nanofluids containing oxide nanoparticles owing to the ease in their preparation. Deterioration in boiling heat transfer was observed in some studies. Metallic nanofluids having metal nanoparticles, which are known for their good heat transfer characteristics in bulk regime, reported drastic enhancement in thermal conductivity. The present paper investigates into the pool boiling characteristics of metallic nanofluids, in particular of Cu-H2O nanofluids, on flat copper heater surface. The results indicate that at comparatively low heat fluxes, there is deterioration in boiling heat transfer with very low particle volume fraction of 0.01%, and it increases with volume fraction and shows enhancement with 0.1%. However, the behavior is the other way around at high heat fluxes. The enhancement at low heat fluxes is due to the fact that the effect of formation of thin sorption layer of nanoparticles on heater surface, which causes deterioration by trapping the nucleation sites, is overshadowed by the increase in microlayer evaporation, which is due to enhancement in thermal conductivity. Same trend has been observed with variation in the surface roughness of the heater as well.

Experimental Convective Heat Transfer With Nanofluids

2008 ◽  
Author(s):  
S. Kabelac ◽  
K. B. Anoop
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Turbulent Regime ◽  
Heat Transfer Characteristics ◽  
Forced Convective Heat Transfer ◽  
Transfer Characteristics

Nanofluids are colloidal suspensions with nano-sized particles (<100nm) dispersed in a base fluid. From literature it is seen that these fluids exhibit better heat transfer characteristics. In our present work, thermal conductivity and the forced convective heat transfer coefficient of an alumina-water nanofluid is investigated. Thermal conductivity is measured by a steady state method using a Guarded Hot Plate apparatus customized for liquids. Forced convective heat transfer characteristics are evaluated with help of a test loop under constant heat flux condition. Controlled experiments under turbulent flow regime are carried out using two particle concentrations (0.5vol% and 1vol %). Experimental results show that, thermal conductivity of nanofluids increases with concentration, but the heat transfer coefficient in the turbulent regime does not exhibit any remarkable increase above measurement uncertainty.

scholarly journals High-Fidelity Calculation of Effective Thermal Response of Composite Media With Heat Generation Source

2020 ◽  
Author(s):  
Kevin Irick ◽  
Nima Fathi
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Behavior ◽  
Nuclear Fuel ◽  
Heat Generation ◽  
Thermal Response ◽  
Thermal Conditions ◽  
Unit Cell ◽  
High Fidelity ◽  
Conductive Heat

Abstract The complexity of conductive heat transfer in a structure increases with heterogeneity (e.g., multi-component solid-phase systems with a source of internal thermal heat generation). Any discontinuity of material property — especially thermal conductivity — would warrant a thorough analysis to evaluate the thermal behavior of the system of interest. Heterogeneous thermal conditions are crucial to heat transfer in nuclear fuel assemblies, because the thermal behavior within the assemblies is governed significantly by the heterogeneous thermal conditions at both the system and component levels. A variety of materials have been used as nuclear fuels, the most conventional of which is uranium dioxide, UO2. UO2 has satisfactory chemical and irradiation tolerances in thermal reactors, whereas the low thermal conductivity of porous UO2 can prove challenging. Therefore, the feasibility of enhancing the thermal conductivity of oxide fuels by adding a high-conductivity secondary solid component is still an important ongoing topic of investigation. Undoubtedly, long-term, stable development of clean nuclear energy would depend on research and development of innovative reactor designs and fuel systems. Having a better understanding of the thermal response of the unit cell of a composite that represents a fuel matrix cell would help to develop the next generation of nuclear fuel and understand potential performance enhancements. The aim of this article is to provide an assessment of a high-fidelity computational model response of heterogeneous materials with heat generation in circular fillers. Two-dimensional, steady-state systems were defined with a circular, heat-generating filler centered in a unit-cell domain. A Fortran-based finite element method (FEM) code was used to solve the heat equation on an unstructured triangular mesh of the systems. This paper presents a study on the effects of a heat-generating filler material’s relative size and thermal conductivity on effective thermal conductance, Geff, within a heterogenous material. Code verification using the method of manufactured solution (MMS) was employed, showing a second-order accurate numerical implementation. Solution verification was performed using a global deviation grid convergence index (GCI) method to assess solution convergence and estimate solution numerical uncertainty, Unum. Trend results are presented, showing variable response in Geff to filler size and thermal conductivity.

Investigations on Transient Natural Convection in Boron Nitride-Mineral Oil Nanofluid Systems

2012 ◽  
Author(s):  
Shijo Thomas ◽  
C. B. Sobhan ◽  
Jaime Taha-Tijerina ◽  
T. N. Narayanan ◽  
P. M. Ajayan
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Transfer Coefficient ◽  
Natural Convection ◽  
Boron Nitride ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Convective Heat Transfer Coefficient ◽  
Mineral Oil

Nanofluids are suspensions or colloids produced by dispersing nanoparticles in base fluids like water, oil or organic fluids, so as to improve their thermo-physical properties. Investigations reported in recent times have shown that the addition of nanoparticles significantly influence the thermophysical properties, such as the thermal conductivity, viscosity, specific heat and density of base fluids. The convective heat transfer coefficient also has shown anomalous variations, compared to those encountered in the base fluids. By careful selection of the parameters such as the concentration and the particle size, it has been possible to produce nanofluids with various properties engineered depending on the requirement. A mineral oil–boron nitride nanofluid system, where an increased thermal conductivity and a reduced electrical conductivity has been observed, is investigated in the present work to evaluate its heat transfer performance under natural convection. The modified mineral oil is produced by chemically dispersing boron nitride nanoparticles utilizing a one step method to obtain a stable suspension. The mineral oil based nanofluid is investigated under transient free convection heat transfer, by observing the temperature-time response of a lumped parameter system. The experimental study is used to estimate the time-dependent convective heat transfer coefficient. Comparisons are made with the base fluid, so that the enhancement in the heat transfer coefficient under natural convection situation can be estimated.

Numerical Study on the Surface Convective Heat Transfer of Mass Concrete Structure

2015 ◽  
Vol 723 ◽  
pp. 992-995
Author(s):  
Biao Li ◽  
Fu Guo Tong ◽  
Chang Liu ◽  
Nian Nian Xi
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Flow Velocity ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Air Flow ◽  
Convective Heat Transfer Coefficient ◽  
Concrete Surface ◽  
Mass Concrete ◽  
Air Flow Velocity

The surface convective heat transfer of mass concrete is an important element of concrete structure temperature effect analysis. Based on coupled Thermal Fluid governing differential equation and finite element method, the paper calculated and analyzed the dependence of the concrete surface convective heat transfer on the air flow velocity and the concrete thermal conductivity coefficient. Results show that the surface convective heat transfer coefficient of concrete is a quadratic polynomial function of the air flow velocity, but influenced much less by the air flow velocity when temperature gradient is dominating in heat transfer. The concrete surface convective heat transfer coefficient increases linearly with the thermal conductivity of concrete increases.

Shivering onset, metabolic response, and convective heat transfer during cold air exposure

1991 ◽  
Vol 70 (5) ◽  
pp. 1996-2002 ◽  
Author(s):  
P. Tikuisis ◽  
D. G. Bell ◽  
I. Jacobs
Keyword(s):  
Heat Transfer ◽  
Metabolic Rate ◽  
Body Fat ◽  
Convective Heat ◽  
Heat Fluxes ◽  
Air Exposure ◽  
Cold Air ◽  
Convective Heat Loss ◽  
Norm Group ◽  
Lean Group

The onset and intensity of shivering of various muscles during cold air exposure are quantified and related to increases in metabolic rate and convective heat loss. Thirteen male subjects resting in a supine position and wearing only shorts were exposed to 10 degrees C air (42% relative humidity and less than 0.4 m/s airflow) for 2 h. Measurements included surface electromyogram recordings at six muscle sites representing the trunk and limb regions of one side of the body, temperatures and heat fluxes at the same contralateral sites, and metabolic rate. The subjects were grouped according to lean (LEAN, n = 6) and average body fat (NORM, n = 7) content. While the rectal temperatures fluctuated slightly but not significantly during exposure, the skin temperature decreased greatly, more at the limb sites than at the trunk sites. Muscles of the trunk region began to shiver sooner and at a higher intensity than those of the limbs. The intensity of shivering and its increase over time of exposure were consistent with the increase in the convective heat transfer coefficient calculated from skin temperatures and heat fluxes. Both the onset of shivering and the magnitude of the increase in metabolic rate due to shivering were higher for the LEAN group than for the NORM group. A regression analysis indicates that, for a given decrease in mean skin temperature, the increase in metabolic rate due to shivering is attenuated by the square root of percent body fat. Thus the LEAN group shivered at higher intensity, resulting in higher increases in metabolic heat production and convective heat loss during cold air exposure than did the NORM group.

Numerical Modeling for the Energy Conversion and Thermal Transmission Accompanying the Process of Oily Cuttings Agitation

2016 ◽  
Author(s):  
Zhipeng Sun ◽  
Hongwu Zhu ◽  
Jian Hua
Keyword(s):  
Heat Transfer ◽  
Energy Conversion ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Solid Phase ◽  
Conductive Heat ◽  
Heat Transmission ◽  
Gas Reservoirs ◽  
Coupling Approach ◽  
Solid Motion

As a kind of unconventional gas reservoirs, shale gas reservoirs are full of potential to develop and have attracted global attention. Accompanying the exploiting of shale gas, a large amount of drilling cuttings contaminated by the oil-based drilling fluid are generated inevitably. How to deal with the drilling cuttings in a environmental-friendly way is tough especially for offshore oilfield. So it is important to investigate this aspect deeply and develop methods to clean the contaminated drilling cuttings. As is known to all, the thermal desorption technology has outstanding performance in oily cuttings cleaning. This paper bases on a kind of mechanical-thermal cuttings cleaning apparatus where the contaminated drilling cuttings are heated up by friction heat produced by the friction between the cuttings and the agitating vanes. And the harmful substance is separated from the cuttings in the agitated and high temperature flow field. This thesis investigates the fundamental of the energy conversion in the frictional process, infer formulas analyzing the thermo-physical phenomena and quantitatively model the energy conversion and thermal transmission accompanying the friction. Firstly, the principle of heat transfer and the law of conservation of energy are employed to investigate the natural law of the energy conversion in the frictional process. Based on the investigation, taking the liquid bridge between the oily cuttings and the agitating vane into account, this paper deduces the physical equations and the frictional energy model to calculate the total frictional heat, heat density and temperature distribution. Following up the frictional model, in the Eulerian-Lagrangian coupling framework, this paper develops a parallel numerical platform of computational fluid dynamics combined with discrete element method (CFD-DEM). In the coupling approach, the gas motion is solved at the computational grid level while the solid motion is resolved at the particle-scale level. Furthermore, the coupling approach is extended with the frictional energy model. The numerical platform can calculate the dense gas-solid motion in the fluidizing apparatus, the convective heat transfer between gas and solid phase, and the conductive heat transfer between particles. Based on the platform, the mechanical-thermal energy conversion and the convective heat transfer between gas and oily cuttings, and the conductive heat transfer between cuttings and the agitating vanes are investigated. Meanwhile an experiment is conducted. By comparing the numerical results with the experiment data, the paper can come to the conclusion that how to dispose the nonlinear parameters such as the friction contact area, the friction coefficient and the normal pressure is the key to accurately model the energy conversion and the heat transmission. What’s more, it can be understood that the convective heat transfer between gas and solid phase play an important role in the heat transmission.

Sign in / Sign up

Export Citation Format

Share Document