scholarly journals DESIGN ANALYSIS AND CONSTRUCTION OF ENERGY HARVESTING COAXIAL HELICOPTER

Aviation ◽  
2013 ◽  
Vol 17 (4) ◽  
pp. 145-149
Author(s):  
Anvinder Singh ◽  
Varun Sharma
Keyword(s):  
Piezoelectric Sensor ◽  
Base Station ◽  
The Body ◽  
Total Power ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Aerial Vehicle ◽  
And Performance ◽  
A Charge ◽  
Coaxial Helicopter

With the growing need for technology, the tendency for errors has increased many times, which often results in loss of human lives. Our main aim of this paper is to show the implementation of a coaxial rotor aerial vehicle that can be controlled by a radio frequency transmitter. The helicopter is capable of manoeuvring in an area where real helicopters cannot. The area could be a flooded region, a place hit by an earthquake, or a building on fire. The main aim is to transmit video of that place to a base station by the camera attached to the helicopter. Various factors required to make a safe and successful coaxial helicopter are discussed and extensive flight testing proves that this flying machine is better in efficiency and performance than a traditional single rotor aerial vehicle. The relation of flight parameters like torque, induced power, rpm, pitch, and total power are discussed. A piezoelectric sensor is used to determine the vibrations occurring in the body so that they can be minimised. A successful attempt to convert the vibrations into a charge by piezoelectric energy harvesters is made.

scholarly journals Piezoelectric Energy Generators Based on Spring and Inertial Mass

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2163 ◽  
Author(s):  
Sanghyun Yoon ◽  
Jinhwan Kim ◽  
Kyung-Ho Cho ◽  
Young-Ho Ko ◽  
Sang-Kwon Lee ◽  
...  
Keyword(s):  
Piezoelectric Materials ◽  
Electric Energy ◽  
Inertial Mass ◽  
Design Parameters ◽  
Mechanical Shock ◽  
Generator System ◽  
Energy Harvesters ◽  
Shock Energy ◽  
Piezoelectric Energy ◽  
And Performance

In this study, inertial mass-based piezoelectric energy generators with and without a spring were designed and tested. This energy harvesting system is based on the shock absorber, which is widely used to protect humans or products from mechanical shock. Mechanical shock energies, which were applied to the energy absorber, were converted into electrical energies. To design the energy harvester, an inertial mass was introduced to focus the energy generating position. In addition, a spring was designed and tested to increase the energy generation time by absorbing the mechanical shock energy and releasing a decreased shock energy over a longer time. Both inertial mass and the spring are the key design parameters for energy harvesters as the piezoelectric materials, Pb(Mg1/3Nb2/3)O3-PbTiO3 piezoelectric ceramics were employed to store and convert the mechanical force into electric energy. In this research, we will discuss the design and performance of the energy generator system based on shock absorbers.

Modeling and Performance Enhancement of Low-Frequency Energy Harvesters

2018 ◽  
pp. 826-862
Author(s):  
Abdessattar Abdelkefi
Keyword(s):  
Performance Enhancement ◽  
Mechanical Energy ◽  
Excitation Frequency ◽  
Low Frequency ◽  
Ocean Waves ◽  
Sensors And Actuators ◽  
Low Frequencies ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
And Performance

There exist numerous low-frequency excitation sources, such as walking, breathing, and ocean waves, capable of providing viable amounts of mechanical energy to power many critical devices, including pacemakers, cell phones, MEMS devices, wireless sensors, and actuators. Harvesting significant energy levels from such sources can only be achieved through the design of devices capable of performing effective energy transfer mechanisms over low frequencies. In this chapter, two concepts of efficient low-frequency piezoelectric energy harvesters are presented, namely, variable-shaped piezoelectric energy harvesters and piezomagnetoelastic energy harvesters. Linear and nonlinear electromechanical models are developed and validated in this chapter. The results show that the quadratic shape can yield up to two times the energy harvested by a rectangular one. It is also demonstrated that depending on the available excitation frequency, an enhanced energy harvester can be tuned and optimized by changing the length of the piezoelectric material or by changing the distance between the two tip magnets.

Concurrent vibration attenuation and low-power electricity generation in a locally resonant metastructure

2022 ◽  
pp. 1045389X2110725
Author(s):  
Mohid Muneeb Khattak ◽  
Christopher Sugino ◽  
Alper Erturk
Keyword(s):  
Vibrational Energy ◽  
Laser Doppler Vibrometer ◽  
Total Power ◽  
Main Beam ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Vibration Attenuation ◽  
Electrodynamic Shaker ◽  
Electrical Loads ◽  
Power Outputs

We investigate piezoelectric energy harvesting on a locally resonant metamaterial beam for concurrent power generation and bandgap formation. The mechanical resonators (small beam attachments on the main beam structure) have piezoelectric elements which are connected to electrical loads to quantify their electrical output in the locally resonant bandgap neighborhood. Electromechanical model simulations are followed by detailed experiments on a beam setup with nine resonators. The main beam is excited by an electrodynamic shaker from its base over the frequency range of0–150 Hz and the motion at the tip is measured using a laser Doppler vibrometer to extract its transmissibility frequency response. The formation of a locally resonant bandgap is confirmed and a resistor sweep is performed for the energy harvesters to capture the optimal power conditions. Individual power outputs of the harvester resonators are compared in terms of their percentage contribution to the total power output. Numerical and experimental analysis shows that, inside the locally resonant bandgap, most of the vibrational energy (and hence harvested energy) is localized near the excited base of the beam, and the majority of the total harvested power is extracted by the first few resonators.

scholarly journals The Effect of Axial Displacement of Magnets in Piezoelectric Energy Harvester

2018 ◽  
Vol 7 (3.7) ◽  
pp. 95
Author(s):  
Li Wah Thong ◽  
Yu Jing Bong ◽  
Swee Leong Kok ◽  
Roszaidi Ramlan
Keyword(s):  
Frequency Spectrum ◽  
Power Output ◽  
Energy Harvester ◽  
Vibrational Energy ◽  
Vibration Energy ◽  
Vibration Energy Harvester ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Operational Frequency ◽  
And Performance

The utilization of vibration energy harvesters as a substitute to batteries in wireless sensors has shown prominent interest in the literature. Various approaches have been adapted in the energy harvesters to competently harvest vibrational energy over a wider spectrum of frequencies with optimize power output.   A typical bistable piezoelectric energy harvester, where the influence of magnetic field is induced into a linear piezoelectric cantilever, is designed and analyzed in this paper. The exploitations of the magnetic force specifically creates nonlinear response and bistability in the energy harvester that extends the operational frequency spectrum for optimize performance.  Further analysis on the effects of axial spacing displacement between two repulsive magnets of the harvester, in terms of x-axis (horizontal) and z-axis (vertical) on its natural resonant frequency and performance based on the frequency response curve are investigated for realizing optimal power output. Experimental results show that by selecting the optimal axial spacing displacement, the vibration energy harvester can be designed to produce maximized output power in an improved broadband of frequency spectrum.  

Modeling and Performance Enhancement of Low-Frequency Energy Harvesters

2015 ◽  
pp. 159-196 ◽  
Author(s):  
Abdessattar Abdelkefi
Keyword(s):  
Performance Enhancement ◽  
Mechanical Energy ◽  
Excitation Frequency ◽  
Low Frequency ◽  
Ocean Waves ◽  
Sensors And Actuators ◽  
Low Frequencies ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
And Performance

There exist numerous low-frequency excitation sources, such as walking, breathing, and ocean waves, capable of providing viable amounts of mechanical energy to power many critical devices, including pacemakers, cell phones, MEMS devices, wireless sensors, and actuators. Harvesting significant energy levels from such sources can only be achieved through the design of devices capable of performing effective energy transfer mechanisms over low frequencies. In this chapter, two concepts of efficient low-frequency piezoelectric energy harvesters are presented, namely, variable-shaped piezoelectric energy harvesters and piezomagnetoelastic energy harvesters. Linear and nonlinear electromechanical models are developed and validated in this chapter. The results show that the quadratic shape can yield up to two times the energy harvested by a rectangular one. It is also demonstrated that depending on the available excitation frequency, an enhanced energy harvester can be tuned and optimized by changing the length of the piezoelectric material or by changing the distance between the two tip magnets.

scholarly journals Modeling, validation, and performance of low-frequency piezoelectric energy harvesters

2013 ◽  
Vol 25 (12) ◽  
pp. 1429-1444 ◽  
Author(s):  
Abdessattar Abdelkefi ◽  
Nilma Barsallo ◽  
Lihua Tang ◽  
Yaowen Yang ◽  
Muhammad R Hajj
Keyword(s):  
Low Frequency ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
And Performance

Analysis and Characterization of Piezoelectric Energy Harvesting From Galloping and Base Excitations With Complex Electrical Circuitry

2016 ◽  
Author(s):  
Hichem Abdelmoula ◽  
Abdessattar Abdelkefi
Keyword(s):  
Excitation Frequency ◽  
Beam Theory ◽  
Load Resistance ◽  
Electrical Circuit ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
And Performance ◽  
Electrical Components ◽  
Euler Bernoulli Beam ◽  
Quenching Phenomenon

The characteristics and performance of piezoelectric energy harvesters concurrently subjected to galloping and base excitations when using a complex electrical circuit are studied. The considered energy harvester is composed of a bilayered cantilever beam with a square cylindrical structure at its tip. Euler-Bernoulli beam theory, nonlinear quasi-steady hypothesis, and Galerkin method are used to develop a reduced order model of this system. The electrical circuitry of the harvester consists of a load resistance, a capacitance, and an inductance. The impacts of the electrical components of the harvester’s circuitry, the wind speed, and the base excitation frequency and acceleration on the broadband characteristics of the harvester, quenching phenomenon, and appearance of new nonlinear behaviors are deeply investigated and discussed. When both coupled frequencies of electrical and mechanical types exists and are far from each other, it is shown that the quenching phenomenon is only related to the coupled frequency of mechanical type. Unlike the existence of the quenching phenomenon, the results show that the beating phenomenon takes place for different excitation frequencies when they are close to the coupled frequencies of electrical and mechanical types.

Sign in / Sign up

Export Citation Format

Share Document