scholarly journals Aerial image based geometric refinement of building models derived from airborne lidar data

10.3990/2.422 ◽  
2016 ◽  
Author(s):  
M. Jarzabek-Rychard ◽  
H-G. Maas
Keyword(s):  
Airborne Lidar ◽  
Aerial Image ◽  
Lidar Data ◽  
Building Models ◽  
Airborne Lidar Data

A multi-scale registration of urban aerial image with airborne lidar data

2015 ◽  
Author(s):  
Shuo Huang ◽  
Siying Chen ◽  
Yinchao Zhang ◽  
Pan Guo ◽  
He Chen
Keyword(s):  
Airborne Lidar ◽  
Aerial Image ◽  
Lidar Data ◽  
Multi Scale ◽  
Airborne Lidar Data

scholarly journals Parameter-Free Half-Spaces Based 3D Building Reconstruction Using Ground and Segmented Building Points from Airborne LiDAR Data with 2D Outlines

2021 ◽  
Vol 13 (21) ◽  
pp. 4430
Author(s):  
Marko Bizjak ◽  
Borut Žalik ◽  
Niko Lukač
Keyword(s):  
Large Scale ◽  
Airborne Lidar ◽  
Lidar Data ◽  
New Approach ◽  
Building Model ◽  
Building Models ◽  
3D Building Model ◽  
Two Stages ◽  
Building Level ◽  
Airborne Lidar Data

This paper aims to automatically reconstruct 3D building models on a large scale using a new approach on the basis of half-spaces, while making no assumptions about the building layout and keeping the number of input parameters to a minimum. The proposed algorithm is performed in two stages. First, the airborne LiDAR data and buildings’ outlines are preprocessed to generate buildings’ base models and the corresponding half-spaces. In the second stage, the half-spaces are analysed and used for shaping the final 3D building model using 3D Boolean operations. In experiments, the proposed algorithm was applied on a large scale, and its’ performance was inspected on a city level and on a single building level. Accurate reconstruction of buildings with various layouts were demonstrated and limitations were identified for large-scale applications. Finally, the proposed algorithm was validated on an ISPRS benchmark dataset, where a RMSE of 1.31 m and completeness of 98.9 % were obtained.

scholarly journals Roof Plane Segmentation from Airborne LiDAR Data Using Hierarchical Clustering and Boundary Relabeling

2020 ◽  
Vol 12 (9) ◽  
pp. 1363 ◽  
Author(s):  
Li Li ◽  
Jian Yao ◽  
Jingmin Tu ◽  
Xinyi Liu ◽  
Yinxuan Li ◽  
...  
Keyword(s):  
Hierarchical Clustering ◽  
Three Dimensional ◽  
Region Growing ◽  
Point Clouds ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Building Models ◽  
Novel Approach ◽  
Airborne Lidar Data ◽  
Seed Points

The roof plane segmentation is one of the key issues for constructing accurate three-dimensional building models from airborne light detection and ranging (LiDAR) data. Region growing is one of the most widely used methods to detect roof planes. It first selects one point or region as a seed, and then iteratively expands to neighboring points. However, region growing has two problems. The first problem is that it is hard to select the robust seed points. The other problem is that it is difficult to detect the accurate boundaries between two roof planes. In this paper, to solve these two problems, we propose a novel approach to segment the roof planes from airborne LiDAR point clouds using hierarchical clustering and boundary relabeling. For the first problem, we first extract the initial set of robust planar patches via an octree-based method, and then apply the hierarchical clustering method to iteratively merge the adjacent planar patches belonging to the same plane until the merging cost exceeds a predefined threshold. These merged planar patches are regarded as the robust seed patches for the next region growing. The coarse roof planes are generated by adding the non-planar points into the seed patches in sequence using region growing. However, the boundaries of coarse roof planes may be inaccurate. To solve this problem, namely, the second problem, we refine the boundaries between adjacent coarse planes by relabeling the boundary points. At last, we can effectively extract high-quality roof planes with smooth and accurate boundaries from airborne LiDAR data. We conducted our experiments on two datasets captured from Vaihingen and Wuhan using Leica ALS50 and Trimble Harrier 68i, respectively. The experimental results show that our proposed approach outperforms several representative approaches in both visual quality and quantitative metrics.

scholarly journals Regularization of Building Roof Boundaries from Airborne LiDAR Data Using an Iterative CD-Spline

2020 ◽  
Vol 12 (12) ◽  
pp. 1904
Author(s):  
Renato César dos Santos ◽  
Mauricio Galo ◽  
Ayman F. Habib
Keyword(s):  
Model Building ◽  
Real Data ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Building Roof ◽  
Building Models ◽  
The Many ◽  
Straight Lines ◽  
Airborne Lidar Data ◽  
Selection Of

Building boundaries play an essential role in many applications such as urban planning and production of 3D realistic views. In this context, airborne LiDAR data have been explored for the generation of digital building models. Despite the many developed strategies, there is no method capable of encompassing all the complexities in an urban environment. In general, the vast majority of existing regularization methods are based on building boundaries that are made up of straight lines. Therefore, the development of a strategy able to model building boundaries, regardless of their degree of complexity is of high importance. To overcome the limitations of existing strategies, an iterative CD-spline (changeable degree spline) regularization method is proposed. The main contribution is the automated selection of the polynomial function that best models each segment of the building roof boundaries. Conducted experiments with real data verified the ability of the proposed approach in modeling boundaries with different levels of complexities, including buildings composed of complex curved segments and point cloud with different densities, presenting Fscore and PoLiS around 95% and 0.30 m, respectively.

scholarly journals AUTOMATIC 3D BUILDING MODEL GENERATIONS WITH AIRBORNE LiDAR DATA

2017 ◽  
Vol IV-4/W4 ◽  
pp. 411-414 ◽  
Author(s):  
N. Yastikli ◽  
Z. Cetin
Keyword(s):  
Point Cloud ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Model Generation ◽  
Automatic Production ◽  
Building Model ◽  
Building Models ◽  
Wide Range ◽  
3D Building Model ◽  
Airborne Lidar Data

LiDAR systems become more and more popular because of the potential use for obtaining the point clouds of vegetation and man-made objects on the earth surface in an accurate and quick way. Nowadays, these airborne systems have been frequently used in wide range of applications such as DEM/DSM generation, topographic mapping, object extraction, vegetation mapping, 3 dimensional (3D) modelling and simulation, change detection, engineering works, revision of maps, coastal management and bathymetry. The 3D building model generation is the one of the most prominent applications of LiDAR system, which has the major importance for urban planning, illegal construction monitoring, 3D city modelling, environmental simulation, tourism, security, telecommunication and mobile navigation etc. The manual or semi-automatic 3D building model generation is costly and very time-consuming process for these applications. Thus, an approach for automatic 3D building model generation is needed in a simple and quick way for many studies which includes building modelling. In this study, automatic 3D building models generation is aimed with airborne LiDAR data. An approach is proposed for automatic 3D building models generation including the automatic point based classification of raw LiDAR point cloud. The proposed point based classification includes the hierarchical rules, for the automatic production of 3D building models. The detailed analyses for the parameters which used in hierarchical rules have been performed to improve classification results using different test areas identified in the study area. The proposed approach have been tested in the study area which has partly open areas, forest areas and many types of the buildings, in Zekeriyakoy, Istanbul using the TerraScan module of TerraSolid. The 3D building model was generated automatically using the results of the automatic point based classification. The obtained results of this research on study area verified that automatic 3D building models can be generated successfully using raw LiDAR point cloud data.

scholarly journals Cloth simulation-based construction of pit-free canopy height models from airborne LiDAR data

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Wuming Zhang ◽  
Shangshu Cai ◽  
Xinlian Liang ◽  
Jie Shao ◽  
Ronghai Hu ◽  
...  
Keyword(s):  
Tree Height ◽  
Point Clouds ◽  
Airborne Lidar ◽  
Canopy Height ◽  
Lidar Data ◽  
Cloth Simulation ◽  
Simulation Based ◽  
Maximum Tree Height ◽  
Airborne Lidar Data ◽  
Better Than

Abstract Background The universal occurrence of randomly distributed dark holes (i.e., data pits appearing within the tree crown) in LiDAR-derived canopy height models (CHMs) negatively affects the accuracy of extracted forest inventory parameters. Methods We develop an algorithm based on cloth simulation for constructing a pit-free CHM. Results The proposed algorithm effectively fills data pits of various sizes whilst preserving canopy details. Our pit-free CHMs derived from point clouds at different proportions of data pits are remarkably better than those constructed using other algorithms, as evidenced by the lowest average root mean square error (0.4981 m) between the reference CHMs and the constructed pit-free CHMs. Moreover, our pit-free CHMs show the best performance overall in terms of maximum tree height estimation (average bias = 0.9674 m). Conclusion The proposed algorithm can be adopted when working with different quality LiDAR data and shows high potential in forestry applications.

Sign in / Sign up

Export Citation Format

Share Document