Experimental Investigation of the Effect of Strain Rate on the Compression Behavior of 3D E-Glass Fiber-Reinforced Composites

2012 ◽  
Vol 174-177 ◽  
pp. 1528-1532 ◽  
Author(s):  
Ling Yan Shen ◽  
Yong Chi Li ◽  
Zhi Hai Wang
Keyword(s):  
Strain Rate ◽  
Glass Fiber ◽  
Three Dimensional ◽  
Dynamic Mechanical Properties ◽  
Thickness Direction ◽  
Fiber Reinforced ◽  
Compression Behavior ◽  
Reinforced Composite ◽  
Glass Fiber Reinforced ◽  
Plane Direction

The MTS810 and SHPB are used to experimentally study the quasi-static and dynamic mechanical properties of three-dimensional E-glass fiber-reinforced composite. Stress-strain curves along the plane and thickness direction are obtained under varying strain rates, ranging from 10-3 to 103s-1. Experimental results show that strain rate has a significant effect on the material response. It is found that the compressive strength and the modulus increase with increasing strain rate, the failure strain, however, decreases slightly. But, the effect of strain rate in-plane and through thickness directions is different. A higher strain rate sensitive modulus and failure is found in the thickness direction, while a higher strain rate sensitive failure strength is found in the in-plane direction.

Investigation of Basalt Fiber Reinforced Polyamide Composites

2008 ◽  
Vol 589 ◽  
pp. 7-12 ◽  
Author(s):  
Tamás Deák ◽  
Tibor Czigány
Keyword(s):  
Glass Fiber ◽  
Basalt Fiber ◽  
Dynamic Mechanical Properties ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Basalt Fibers ◽  
Reinforced Composite ◽  
Glass Fiber Reinforced ◽  
Injection Molded

Basalt fiber reinforced polyamide composites were investigated to determine their static and dynamic mechanical properties. The composites were compounded in an extruder and were injection molded. A glass fiber reinforced composite also was investigated. Two different basalt fibers were used with silane sizing and one of them was used also without sizing. The results show that composites with silane sized basalt fibers have properties similar to glass fiber reinforced composites, while unsized basalt fibers eventuate smaller strength and higher brittleness.

The effect of nanoparticle additive on surface milling in glass fiber reinforced composite structures

2021 ◽  
pp. 096739112110141
Author(s):  
Ferhat Ceritbinmez ◽  
Ahmet Yapici ◽  
Erdoğan Kanca
Keyword(s):  
Composite Materials ◽  
Glass Fiber ◽  
Composite Structures ◽  
Fiber Composite ◽  
Cutting Speed ◽  
Fiber Reinforced ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite ◽  
Glass Fiber Reinforced ◽  
Composite Layers

In this study, the effect of adding nanosize additive to glass fiber reinforced composite plates on mechanical properties and surface milling was investigated. In the light of the investigations, with the addition of MWCNTs additive in the composite production, the strength of the material has been changed and the more durable composite materials have been obtained. Slots were opened with different cutting speed and feed rate parameters to the composite layers. Surface roughness of the composite layers and slot size were examined and also abrasions of cutting tools used in cutting process were determined. It was observed that the addition of nanoparticles to the laminated glass fiber composite materials played an effective role in the strength of the material and caused cutting tool wear.

scholarly journals Fatigue performance of nanoclay filled glass fiber reinforced hybrid composite laminate

2017 ◽  
Author(s):  
◽  
John Olumide Olusanya
Keyword(s):  
Fatigue Life ◽  
Service Life ◽  
Glass Fiber ◽  
Residual Strength ◽  
Composite Structures ◽  
Fatigue Performance ◽  
Fiber Reinforced ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite ◽  
Glass Fiber Reinforced

In this study, the fatigue life of fiber reinforced composite (FRC) materials system was investigated. A nano-filler was used to increase the service life of the composite structures under cyclical loading since such structures require improved structural integrity and longer service life. Behaviour of glass fiber reinforced composite (GFRC) enhanced with various weight percentages (1 to 5 wt. %) of Cloisite 30B montmorillonite (MMT) clay was studied under static and fatigue loading. Epoxy clay nanocomposite (ECN) and hybrid nanoclay/GFRC laminates were characterised using differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The mechanical properties of neat GFRC and hybrid nanoclay/GFRC laminates were evaluated. Fatigue study of the composite laminates was conducted and presented using the following parameter; matrix crack initiation and propagation, interfacial debonding, delamination and S–N relationship. Residual strength of the materials was evaluated using DMA to determine the reliability of the hybrid nanoclay/GFRC laminates. The results showed that ECN and hybrid nanoclay/GFRC laminates exhibited substantial improvement in most tests when compared to composite without nanoclay. The toughening mechanism of the nanoclay in the GFRC up to 3 wt. % gave 17%, 24% and 56% improvement in tensile, flexural and impact properties respectively. In the fatigue performance, less crack propagations was found in the hybrid nanoclay/GFRC laminates. Fatigue life of hybrid nanoclay/GFRC laminate was increased by 625% at the nanoclay addition up to 3 wt. % when compared to neat GFRC laminate. The residual strength of the composite materials revealed that hybrid nanoclay/GFRC showed less storage modulus reduction after fatigue. Likewise, a positive shift toward the right was found in the tan delta glass transition temperature (Tg) of 3 wt. % nanoclay/GFRC laminate after fatigue. It was concluded that the application of nanoclay in the GFRC improved the performance of the material. The hybrid nanoclay/GFRC material can therefore be recommended mechanically and thermally for longer usage in structural application.

Sign in / Sign up

Export Citation Format

Share Document