Finite Element Analysis of the Precast Shear Walls

2013 ◽  
Vol 275-277 ◽  
pp. 1276-1280
Author(s):  
Yun Lin Liu ◽  
Wan Yun Yin ◽  
Ru Ling ◽  
Ke Wei Ding ◽  
Ren Cai Jin ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Axial Compression ◽  
Seismic Performance ◽  
Compression Ratio ◽  
Shear Wall ◽  
Element Analysis ◽  
Axial Compression Ratio ◽  
Precast Shear Wall ◽  
The Finite Element Analysis

To reduce the construction cost of the domestic promotion of the new prefabricated concrete shear wall structure system which is promoted in our country. To analyze the factors which can affect the load-carrying capacity and seismic performance of shear wall, including the axial compression ratio, the concrete strength, the reinforcement ratio and some other factors. Among all these factors, the axial compression ratio is the main factor influencing the seismic performance and the section ductility [1]. This paper adopts the ANSYS finite element analysis program, operating a nonlinear analysis on the performance of the precast shear wall when it is with one-way loading, studying the axial compression ratio's effect on the bearing capacity and deformability of the precast shear wall. According to the finite element analysis, when the axial compression ratio is between 0.2 to 0.4 and as it rises, the specimen's bearing capacity and stiffness will increases while deformability and ductility will decrease. Through the finite element analysis, we can provide reliable theory basis for the performance of the precast shear wall when it is with one-way loading.

Finite Element Analysis on Different Axial Compression Ratio of Composite CFST Column and Steel Beam Connection

2014 ◽  
Vol 578-579 ◽  
pp. 278-281
Author(s):  
Pi Yuan Xu ◽  
Qian Chen ◽  
Ya Feng Xu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Bearing Capacity ◽  
Axial Compression ◽  
Compression Ratio ◽  
Element Model ◽  
Element Analysis ◽  
Finite Element Software ◽  
Axial Compression Ratio ◽  
Modeling Process

In this paper, in order to understand fully the development of failure mechanism, bearing capacity and seismic performance of the steel H-beams and composite concrete filled steel tubular (CFST) column joints strengthened by outside strengthening ring, in the space zone the effects of changing the axial compression ratio is investigated. A 3D joint finite element model is built up by finite element software ABAQUS, the elastic-plastic finite element analysis is carried through numerical modeling process. The analysis results showed that low axial compression ratio has a little influence on the bearing capacity; with the increase of axial pressure the bearing capacity will decrease in a high axial compression ratio, moreover the failure pattern of joint changes from beam end to column end. The ductility of the specimens is decreased by raising axial compression ratio.

With Different Axial Compression, the Finite Element Analysis of Concrete Frame Column that Reinforced by Assemble Inclined Web Steel Truss

2014 ◽  
Vol 1079-1080 ◽  
pp. 177-182
Author(s):  
Shao Wu Zhang ◽  
Ying Chuan Chen ◽  
Geng Biao Zhang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Bearing Capacity ◽  
Axial Compression ◽  
Simulation Analysis ◽  
Hysteresis Curve ◽  
Element Analysis ◽  
Concrete Frame ◽  
The Finite Element Analysis ◽  
Steel Truss

In order to study the performance of concrete frame columns that reinforcedby assembleinclined web steel truss, with the same reciprocatinghorizontal displacement and different axialcompression.It canbe calculate the mechanical behavior of concrete frame columns and reinforced columns by using the finite element analysis software ABAQUS. Simulation analysis shows that the bearing capacity ofreinforced columnshas greatly increased andpresented a full hysteresis curve. The result shows that the reinforcement method of assemble inclined web steel truss can greatly improve the bearing capacity and ductility of the concrete frame column, and the axial compression is larger, the better the reinforcement effect.

scholarly journals Analysis of the Seismic Performance of a Two-Span Specially Shaped Column Frame

2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Zhen-chao Teng ◽  
Tian-jia Zhao ◽  
Yu Liu
Keyword(s):  
Finite Element ◽  
Energy Dissipation ◽  
Axial Compression ◽  
Seismic Performance ◽  
Compression Ratio ◽  
Peak Load ◽  
Frame Structure ◽  
Axial Compression Ratio ◽  
Energy Dissipation Capacity ◽  
Specially Shaped Column

In traditional building construction, the structural columns restrict the design of the buildings and the layout of furniture, so the use of specially shaped columns came into being. The finite element model of a reinforced concrete framework using specially shaped columns was established by using the ABAQUS software. The effects of concrete strength, reinforcement ratio, and axial compression ratio on the seismic performance of the building incorporating such columns were studied. The numerical analysis was performed for a ten-frame structure with specially shaped columns under low reversed cyclic loading. The load-displacement curve, peak load, ductility coefficient, energy dissipation capacity, and stiffness degradation curve of the specially shaped column frame were obtained using the ABAQUS finite element software. The following three results were obtained from the investigation: First, when the strength of concrete in the specially shaped column frame structure was increased, the peak load increased, while the ductility and energy dissipation capacity weakened, which accelerated the stiffness degradation of the structure. Second, when the reinforcement ratio was increased in the specially shaped column frame structure, the peak load increased and the ductility and energy dissipation capacity also increased, which increased the stiffness of the structure. Third, when the axial compression ratio was increased in the structure, the peak load increased, while ductility and energy dissipation capacity reduced, which accelerated the degradation of structural stiffness.

The seismic performance of precast short-leg shear wall under cyclic loading

2020 ◽  
pp. 136943322096372
Author(s):  
Xiuli Du ◽  
Min Wu ◽  
Hongtao Liu
Keyword(s):  
Energy Consumption ◽  
Cyclic Loading ◽  
Axial Compression ◽  
Seismic Performance ◽  
Compression Ratio ◽  
Structural Parameters ◽  
Shear Wall ◽  
Shear Capacity ◽  
Axial Compression Ratio ◽  
Hysteretic Performance

In order to study the seismic performance of precast short-leg shear wall connected by grouting sleeves (PSSW), the three-dimensional numerical model was established by using the experiment of PSSW subjected to low cyclic loading. Based on good agreement between numerical results and experimental results, the numerical analysis models with different structural parameters of axial compression ratio and splicing position were designed in detail, and the effects of various parameters on the seismic performance of PSSW were analyzed. The results show that the PSSW exhibits wide and stable hysteresis loops, indicating a satisfactory hysteretic performance and an excellent energy consumption capacity. With the increase of the axial compression ratio, the shear capacity of horizontal splice seam is improved, but the ductility coefficient and total energy consumption decrease obviously. The most disadvantageous position of PSSW can be effectively avoided by changing the position of the post pouring seam. The bearing capacity of the specimens is basically stable, and the energy consumption increases significantly, so the post pouring seam of precast wall is recommended to be far away from the bottom section of the wall. In addition, the failure mechanism of different splicing positions was analyzed in detail.

Evaluation of Stiffness and Stress of External Fixators with Curved Acrylic Connecting Bars

2000 ◽  
Vol 13 (02) ◽  
pp. 65-72 ◽  
Author(s):  
R. Shahar
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stainless Steel ◽  
Axial Compression ◽  
External Fixator ◽  
External Fixators ◽  
Analysis Method ◽  
Lateral Bending ◽  
Element Analysis ◽  
The Finite Element Analysis

SummaryThe use of acrylic connecting bars in external fixators has become widespread in veterinary orthopaedics. One of the main advantages of an acrylic connecting bar is the ability to contour it into a curved shape. This allows the surgeon to place the transcortical pins according to safety and convenience considerations, without being bound by the requirement of the standard stainless steel connecting bar, that all transcortical pins be in the same plane.The purpose of this study was to evaluate the stiffness of unilateral and bilateral medium-sized external fixator frames with different curvatures of acrylic connecting bars. Finite element analysis was used to model the various frames and obtain their stiffness under four types of load: Axial compression, four-point medio-lateral bending, fourpoint antero-posterior bending and torsion. The analysis also provided the maximal pin stresses occurring in each frame for each loading condition.Based on the results of this study, curvatures of acrylic connecting bars of up to a maximal angular difference between pins of 25° will result in very similar stiffness and maximal pin stresses to those of the equivalent, uniplanar stainless steel system. In both unilateral and bilateral systems the stiffness decreases slightly as angulation increases for axial compression and medio-lateral bending, increases slightly for torsion and increases substantially for antero-posterior bending.External fixator systems with curved acrylic connecting bars are commonly used in veterinary orthopaedics. This paper evaluates the biomechanical performance of such systems by applying the finite element analysis method. It shows that external fixators with curved acrylic connecting bars exhibit stiffness and maximal pin stresses which are similar to those of the standard stainless steel system.

Effect of Axial Compression Ratio and Concrete Strength on Seismic Performance of Concrete Filled Steel Tube Beam-Column Joints

2014 ◽  
Vol 488-489 ◽  
pp. 704-707
Author(s):  
Ying Wang ◽  
Miao Li ◽  
Jin Hua Xu ◽  
He Fan
Keyword(s):  
Axial Compression ◽  
Seismic Performance ◽  
Compression Ratio ◽  
Concrete Strength ◽  
Steel Tube ◽  
Hysteresis Curve ◽  
Element Analysis ◽  
Concrete Filled Steel Tube ◽  
Axial Compression Ratio ◽  
Strength And Stiffness

Based on finite element analysis o f concrete filled steel tube beam-column joints under the single axial compression ratio and concrete strength, further research was done to analyze the seismic performance of concrete filled steel tube beam-column joints under different axial compression ratio and concrete strength. Beam-column joint which is connected by bolts with welding extended steel sheets at the beam root was analyzed. The results show that with the increase of axial compression ratio, strength and stiffness degradation of the joint accelerated gradually. Axial compression ratio at 0.3, 0.4 are appropriate values for joints specimen, load-displacement hysteresis curve of joint specimens is relatively plump and shows good seismic performance. Chance of concrete strength also had effect on seismic performance of joint specimen, but in contrast it is not so obviously.

Finite Element Analysis on Circular Steel Tube Composite Column Filled with Steel Reinforced Concrete

2012 ◽  
Vol 166-169 ◽  
pp. 318-321
Author(s):  
Ya Feng Xu ◽  
Xu Yang ◽  
Xin Wang ◽  
Shou Yan Bai
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Axial Compression ◽  
Steel Tube ◽  
Element Analysis ◽  
Steel Reinforced Concrete ◽  
Axial Compression Ratio ◽  
Circular Steel Tube ◽  
Deformation Ability

The article analysis the seismic behaviors of circular steel tube composite column filled with steel reinforced concrete by the large finite element analysis software ABAQUS, adopted the load-displacement method and aimed at studying the mechanical properties of circular steel tube composite columns filled with steel reinforced concrete under horizontal low-cyclic loading, considering the degree of ductility, capacity of energy dissipation by the steel ratio and axial compression ratio. Under different axial compression ratios and steel ratios, the hysteresis curves and skeleton curves are carried out. Along with the increase of steel ratio, the deformation ability and ultimate bearing capacity are raised, but with the increase of axial compression ratio, the deformation ability becomes worse.

Non-Linear Finite Element Analysis of EPS Module Shear Wall

2012 ◽  
Vol 204-208 ◽  
pp. 4533-4537
Author(s):  
Min Zhang ◽  
Ying Yu Jin ◽  
Li Jun Dou
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Shear Wall ◽  
Experiment Data ◽  
Element Analysis ◽  
Attenuation Coefficients ◽  
Thermal Insulating ◽  
The Finite Element Analysis ◽  
Vibrate Concrete ◽  
Stress And Strain Distribution

EPS module is connected like roy brick to form a hollow wall, then grouting the without vibrate concrete to form the thermal-insulating shear wall. Based on the experiment data, analyzed the aseismatic behavior of EPS module shear wall under horizontal cyclic loads by ANSYS software. Compared EPS module shear wall with the traditional shear wall on crack status, stress and strain distribution, rigidity, and attenuation coefficients of rigidity. Compared the experiment data with the finite element analysis result by ANSYS, discussed the method of analyzing this new plate material by finite element analysis, which can be basis for experiment and analysis on this material.

Sign in / Sign up

Export Citation Format

Share Document