The Application of Wind Speed Numerical Simulation in Wind Power Generation

2013 ◽  
Vol 380-384 ◽  
pp. 3370-3373 ◽  
Author(s):  
Li Yang Liu ◽  
Jun Ji Wu ◽  
Shao Liang Meng
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Power ◽  
Wind Farm ◽  
Power Grid ◽  
Wind Farms ◽  
Stable Operation ◽  
Wind Gust ◽  
Gradual Change ◽  
Wake Effect

With the massive development and application of wind energy, wind power is having an increasing proportion in power grid. The changes of the wind speed in a wind farm will lead to fluctuations in the power output which would affect the stable operation of the power grid. Therefore the research of the characteristics of wind speed has become a hot topic in the field of wind energy. In the paper, the wind speed at the wind farm was simulated in a combination of wind speeds by which wind speed was decomposed of four components including basic wind, gust wind, stochastic wind and gradient wind which denote the regularity, the mutability, the gradual change and the randomness of a natural wind respectively. The model is able to reflect the characteristics of a real wind, easy for engineering simulation and can also estimate the wind energy of a wind farm through the wind speed and wake effect model. This paper has directive significance in the estimation of wind resource and the layout of wind turbines in wind farms.

scholarly journals Performance Enhancement of Proposed Namaacha Wind Farm by Minimising Losses Due to the Wake Effect: A Mozambican Case Study

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4291
Author(s):  
Paxis Marques João Roque ◽  
Shyama Pada Chowdhury ◽  
Zhongjie Huan
Keyword(s):  
Wind Speed ◽  
Wind Power ◽  
Wind Turbines ◽  
Power Output ◽  
Wind Farm ◽  
Wind Farms ◽  
Operating Conditions ◽  
Wake Effect ◽  
Wind Generators ◽  
Wind Potential

District of Namaacha in Maputo Province of Mozambique presents a high wind potential, with an average wind speed of around 7.5 m/s and huge open fields that are favourable to the installation of wind farms. However, in order to make better use of the wind potential, it is necessary to evaluate the operating conditions of the turbines and guide the independent power producers (IPPs) on how to efficiently use wind power. The investigation of the wind farm operating conditions is justified by the fact that the implementation of wind power systems is quite expensive, and therefore, it is imperative to find alternatives to reduce power losses and improve energy production. Taking into account the power needs in Mozambique, this project applied hybrid optimisation of multiple energy resources (HOMER) to size the capacity of the wind farm and the number of turbines that guarantee an adequate supply of power. Moreover, considering the topographic conditions of the site and the operational parameters of the turbines, the system advisor model (SAM) was applied to evaluate the performance of the Vestas V82-1.65 horizontal axis turbines and the system’s power output as a result of the wake effect. For any wind farm, it is evident that wind turbines’ wake effects significantly reduce the performance of wind farms. The paper seeks to design and examine the proper layout for practical placements of wind generators. Firstly, a survey on the Namaacha’s electricity demand was carried out in order to obtain the district’s daily load profile required to size the wind farm’s capacity. Secondly, with the previous knowledge that the operation of wind farms is affected by wake losses, different wake effect models applied by SAM were examined and the Eddy–Viscosity model was selected to perform the analysis. Three distinct layouts result from SAM optimisation, and the best one is recommended for wind turbines installation for maximising wind to energy generation. Although it is understood that the wake effect occurs on any wind farm, it is observed that wake losses can be minimised through the proper design of the wind generators’ placement layout. Therefore, any wind farm project should, from its layout, examine the optimal wind farm arrangement, which will depend on the wind speed, wind direction, turbine hub height, and other topographical characteristics of the area. In that context, considering the topographic and climate features of Mozambique, the study brings novelty in the way wind farms should be placed in the district and wake losses minimised. The study is based on a real assumption that the project can be implemented in the district, and thus, considering the wind farm’s capacity, the district’s energy needs could be met. The optimal transversal and longitudinal distances between turbines recommended are 8Do and 10Do, respectively, arranged according to layout 1, with wake losses of about 1.7%, land utilisation of about 6.46 Km2, and power output estimated at 71.844 GWh per year.

Ultra-Short-Term Forecasting Based on Phase Space Reconstruction and Wind Power Wind

2015 ◽  
Vol 713-715 ◽  
pp. 1444-1447
Author(s):  
De Yin Du ◽  
Bao Fan Chen
Keyword(s):  
Phase Space ◽  
Wind Speed ◽  
Power Systems ◽  
Wind Power ◽  
Wind Farm ◽  
Wind Farms ◽  
Stable Operation ◽  
Short Term ◽  
Short Term Forecasting ◽  
Turbine Output

The amount of random variation of wind speed, wind turbine output power are volatile, a lot of wind power will be on the safe and stable operation of power systems and power quality pose serious challenges, so the wind farm wind speed and power generation forecast scheduling and management of wind farms play an important role. According wind with chaotic discuss the use of phase space CC method to reconstruct the chaotic time series, and the phase space of a wind farm 10 units were reconstructed using the weighted first order local prediction model to obtain short-term within 1h wind forecast values obtained using the power curve conversion method of generating power for each unit. By examples show that the proposed method is feasible and effective.

scholarly journals A Hybrid Wind Speed Forecasting Method and Wind Energy Resource Analysis Based on a Swarm Intelligence Optimization Algorithm and an Artificial Intelligence Model

2018 ◽  
Vol 10 (11) ◽  
pp. 3913 ◽  
Author(s):  
Tonglin Fu ◽  
Chen Wang
Keyword(s):  
Time Series ◽  
Wind Speed ◽  
Wind Energy ◽  
Wind Power ◽  
Wind Farm ◽  
Operating Cost ◽  
Energy Resource ◽  
Wind Farms ◽  
Wind Speed Forecasting ◽  
Analysis System

Wind power has the most potential for clean and renewable energy development. Wind power not only effectively solves the problem of energy shortages, but also reduces air pollution. In recent years, wind speed time series analyses have increasingly become a concern of administrators and power grid dispatchers searching for a reasonable way to reduce the operating cost of wind farms. However, analyzing wind speed in detail has become a difficult task, because the traditional models sometimes fail to capture data features due to the randomness and intermittency of wind speed. In order to analyze wind speed series in detail, in this paper, an effective and practical analysis system is studied and developed, which includes a data analysis module, a data preprocessing module, a parameter optimization module, and a wind speed forecasting module. Numerical results show that the wind time series analysis system can not only assess wind energy resources of a wind farm, but also master future changes of wind speed, and can be an effective tool for wind farm management and decision-making.

Modeling Large-Scale Wind Farms for Reliability Analysis Considering Wake Effect

2014 ◽  
Vol 543-547 ◽  
pp. 647-652
Author(s):  
Ye Zhou Hu ◽  
Lin Zhang ◽  
Pai Liu ◽  
Xin Yuan Liu ◽  
Ming Zhou
Keyword(s):  
Power Generation ◽  
Wind Speed ◽  
Wind Power ◽  
Large Scale ◽  
Wind Farm ◽  
Wind Farms ◽  
Wind Power Generation ◽  
Wake Effect ◽  
Effect Model ◽  
The Individual

Large scale wind power penetration has a significant impact on the reliability of the electric generation systems. A wind farm consists of a large number of wind turbine generators (WTGs). A major difficulty in modeling wind farms is that the WTG not have an independent capacity distribution due to the dependence of the individual turbine output on the same energy source, the wind. In this paper, a model of the wind farm output power considering multi-wake effects is established according to the probability distribution of the wind speed and the characteristic of the wind generator output power: based on the simple Jenson wake effect model, the wake effect with wind speed sheer model and the detail wake effect model with the detail shade areas of the upstream wind turbines are discussed respectively. Compared to the individual wake effect model, this model takes the wind farm as a whole and considers the multi-wakes effect on the same unit. As a result the loss of the velocity inside the wind farm is considered more exactly. Furthermore, considering the features of sequentially and self-correlation of wind speed, an auto-regressive and moving average (ARMA) model for wind speed is built up. Also the reliability model of wind farm is built when the output characteristics of wind power generation units, correlation of wind speeds among different wind farms, outage model of wind power generation units, wake effect of wind farm and air temperature are considered. Simulation results validate the effectiveness of the proposed models. These models can be used to research the reliability of power grid containing wind farms, wind farm capacity credit as well as the interconnection among wind farms

scholarly journals Analysis of Wind Turbine Aging through Operation Data Calibrated by LiDAR Measurement

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2319
Author(s):  
Hyun-Goo Kim ◽  
Jin-Young Kim
Keyword(s):  
Power Generation ◽  
Wind Speed ◽  
Wind Turbine ◽  
Wind Farm ◽  
Free Stream ◽  
Turbine Blades ◽  
Wind Farms ◽  
Lidar Measurement ◽  
Wind Turbine Blades ◽  
Wake Effect

This study analyzed the performance decline of wind turbine with age using the SCADA (Supervisory Control And Data Acquisition) data and the short-term in situ LiDAR (Light Detection and Ranging) measurements taken at the Shinan wind farm located on the coast of Bigeumdo Island in the southwestern sea of South Korea. Existing methods have generally attempted to estimate performance aging through long-term trend analysis of a normalized capacity factor in which wind speed variability is calibrated. However, this study proposes a new method using SCADA data for wind farms whose total operation period is short (less than a decade). That is, the trend of power output deficit between predicted and actual power generation was analyzed in order to estimate performance aging, wherein a theoretically predicted level of power generation was calculated by substituting a free stream wind speed projecting to a wind turbine into its power curve. To calibrate a distorted wind speed measurement in a nacelle anemometer caused by the wake effect resulting from the rotation of wind-turbine blades and the shape of the nacelle, the free stream wind speed was measured using LiDAR remote sensing as the reference data; and the nacelle transfer function, which converts nacelle wind speed into free stream wind speed, was derived. A four-year analysis of the Shinan wind farm showed that the rate of performance aging of the wind turbines was estimated to be −0.52%p/year.

Assessment of wind energy potential and characteristics in Qatar for clean electricity generation

2021 ◽  
pp. 0309524X2110438
Author(s):  
Carlos Méndez ◽  
Yusuf Bicer
Keyword(s):  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Wind Farm ◽  
Wind Farms ◽  
Wind Rose ◽  
Energy Potential ◽  
Wind Power Density ◽  
Wind Speeds ◽  
Wind Energy Potential

The present study analyzes the wind energy potential of Qatar, by generating a wind atlas and a Wind Power Density map for the entire country based on ERA-5 data with over 41 years of measurements. Moreover, the wind speeds’ frequency and direction are analyzed using wind recurrence, Weibull, and wind rose plots. Furthermore, the best location to install a wind farm is selected. The results indicate that, at 100 m height, the mean wind speed fluctuates between 5.6054 and 6.5257 m/s. Similarly, the Wind Power Density results reflect values between 149.46 and 335.06 W/m2. Furthermore, a wind farm located in the selected location can generate about 59.7437, 90.4414, and 113.5075 GWh/y electricity by employing Gamesa G97/2000, GE Energy 2.75-120, and Senvion 3.4M140 wind turbines, respectively. Also, these wind farms can save approximately 22,110.80, 17,617.63, and 11,637.84 tons of CO2 emissions annually.

Effect of Air Density on Output Power of Wind Turbine

2013 ◽  
Vol 336-338 ◽  
pp. 1114-1117 ◽  
Author(s):  
Ying Zhi Liu ◽  
Wen Xia Liu
Keyword(s):  
Wind Speed ◽  
Wind Power ◽  
Output Power ◽  
Power Output ◽  
Wind Farm ◽  
Wind Farms ◽  
Power Curve ◽  
Air Density ◽  
Wind Farm Design ◽  
Farm Design

This paper elaborates the effect of wind speed on the output power of the wind farms at different locations. It also describes the correction of the power curve and shows the comparison chart of the standard power curve and the power curve after correction. In China's inland areas, wind farms altitude are generally higher, the air density is much different from the standard air density. The effect of air density on wind power output must be considered during the wind farm design.

scholarly journals Method for Determining the Maximum Allowable Capacity of Wind Farm Based on Box Set Robust Optimization

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Lihui Guo ◽  
Hao Bai
Keyword(s):  
Wind Speed ◽  
Robust Optimization ◽  
Wind Power ◽  
Optimization Model ◽  
Wind Farm ◽  
Optimization Theory ◽  
Wind Farms ◽  
Bilevel Optimization ◽  
Grid Connection ◽  
Node Voltage

With the increasing penetration of wind power, the randomness and volatility of wind power output would have a greater impact on safety and steady operation of power system. In allusion to the uncertainty of wind speed and load demand, this paper applied box set robust optimization theory in determining the maximum allowable installed capacity of wind farm, while constraints of node voltage and line capacity are considered. Optimized duality theory is used to simplify the model and convert uncertainty quantities in constraints into certainty quantities. Under the condition of multi wind farms, a bilevel optimization model to calculate penetration capacity is proposed. The result of IEEE 30-bus system shows that the robust optimization model proposed in the paper is correct and effective and indicates that the fluctuation range of wind speed and load and the importance degree of grid connection point of wind farm and load point have impact on the allowable capacity of wind farm.

Ensemble-Based Data Assimilation for Wind Forecasting – Application to Wind Farm

2020 ◽  
Author(s):  
Yang-Ming Fan
Keyword(s):  
Wind Speed ◽  
Natural Gas ◽  
Data Assimilation ◽  
Wind Energy ◽  
Wind Farm ◽  
Initial Conditions ◽  
Wind Farms ◽  
Weather Conditions ◽  
Energy Output ◽  
Combining Data

<p>The purpose of this study is to develop an ensemble-based data assimilation method to accurately predict wind speed in wind farm and provide it for the use of wind energy intelligent forecasting platform. As Taiwan government aimed to increase the share of renewable energy generation to 20% by 2025, among them, the uncertain wind energy output will cause electricity company has to reserve a considerable reserve capacity when dispatching power, and it is usually high cost natural gas power generation. In view of this, we will develop wind energy intelligent forecasting platform with an error of 10% within 72 hours and expect to save hundred millions of dollars of unnecessary natural gas generators investment. Once the wind energy can be predicted more accurately, the electricity company can fully utilize the robustness and economy of smart grid supply. Therefore, the mastery of the change of wind speed is one of the key factors that can reduce the minimum error of wind energy intelligent forecasting.</p><p>There are many uncertainties in the numerical meteorological models, including errors in the initial conditions or defects in the model, which may affect the accuracy of the prediction. Since the deterministic prediction cannot fully grasp the uncertainty in the prediction process, so it is difficult to obtain all possible wind field changes. The development of ensemble-based data assimilation prediction is to make up for the weakness of deterministic prediction. With the prediction of 20 wind fields as ensemble members, it is expected to include the uncertainty of prediction, quantify the uncertainty, and integrate the wind speed observations of wind farms as well to provide the optimal prediction of wind speed for the next 72 hours. The results show that the prediction error of wind speed within 72 hours is 6% under different weather conditions (excluding typhoons), which proves that the accuracy of wind speed prediction by combining data assimilation technology and ensemble approach is better.</p>

Operation and Simulation of Hybrid Wind and Gas Turbine Power System Employing Wind Power Forecasting

2012 ◽  
Author(s):  
Junrong Xia ◽  
Pan Zhao ◽  
Yiping Dai
Keyword(s):  
Power System ◽  
Gas Turbine ◽  
Wind Power ◽  
Wind Farm ◽  
Power Grid ◽  
Wind Farms ◽  
Hybrid Power System ◽  
Hybrid Power ◽  
Large Wind ◽  
Operation Scheduling

Due to the intermittence and fluctuation of wind resource, the integration of large wind farms in a power grid introduces an additional stochastic component to power system scheduling. This always brings challenges to maintain the stability of power system. Integrating gas turbine units with wind farms can compensate their output fluctuation. In this paper, a methodology for the operation scheduling of a hybrid power system that consists of a large wind farm and gas turbine units is presented. A statistical model based on numerical weather prediction is used to forecast power output of the wind farm for the next 24 hours at quarter-hour intervals. Forecasts of wind power are used for optimizing the operation scheduling. In order to study the dynamic performance of the proposed hybrid power system, dynamic modeling of this hybrid power system is addressed. Wind farm and gas turbine units are integrated through an AC bus, and then connected to a power grid. An aggregated model of the wind farm and detailed models of gas turbine units are developed, and are implemented using MATLAB/Simulink. Simulation studies are carried out to evaluate the system performance using real weather data. The simulation results show that the proposed hybrid power system can compensate fluctuating wind power effectively and make wind power more reliable.

Sign in / Sign up

Export Citation Format

Share Document