UV-Curable Organic-Inorganic Hybrid Films Based on Epoxynorbornene Linseed Oils

2011 ◽  
Vol 217-218 ◽  
pp. 294-299
Author(s):  
Jian Yun He ◽  
Jin Ping Xiong ◽  
Bing Qian Xia
Keyword(s):  
Linseed Oil ◽  
Silica Content ◽  
Coating Properties ◽  
Hybrid Films ◽  
Nano Silica ◽  
Pencil Hardness ◽  
Uv Curable ◽  
Inorganic Hybrid ◽  
Silica Coatings ◽  
Wetting Properties

Epoxynorbornene linseed oil (ENLO) is a new kind of epoxide from renewable sources. An UV-curable organic/inorganic hybrid films using epoxynorbornene linseed oils (ENLO) and surface treated nano-silica were formulated. The mechanical properties，thermal properties and coating properties of the ENLO /silica coatings were evaluated as the function of nano-silica content. The results indicated that after incorporating the nano-silica, the strength, modulus and glass transition temperature of the hybrid films enhanced, while the elongation at break decreased. The nano-silica also improved the hybrid coating properties such as pencil hardness, solvent resistance and surface wetting properties. The morphology observation of the films by atomic force microscopy (AFM) showed that the average silica particle size was ~ 70 nm and the particles were well-dispersed in the organic phase.

UV-Curable organic-inorganic hybrid films based on tetraethylorthosilicate oligomer and special acrylated polyester

e-Polymers ◽  
2012 ◽  
Vol 12 (1) ◽  
Author(s):  
Jianyun He ◽  
Jinping Xiong ◽  
Bingqian Xia
Keyword(s):  
Uv Light ◽  
Uv Curing ◽  
Organic Matrix ◽  
Dynamic Mechanical Properties ◽  
Hybrid Films ◽  
Uv Curable ◽  
Inorganic Hybrid ◽  
Dynamic Mechanical ◽  
H Nmr ◽  
Uv Curing Process

AbstractOrganic-inorganic hybrid films were prepared using tetraethylorthosilicate (TEOS) oligomer and special acrylated polyester (SAP) via a UV-curing process. TEOS oligomers were prepared in the presence of water and ethanol using hydrochloric acid as the catalyst and characterized using 1H NMR, 29Si NMR and MALDI-TOF mass spectra. Special acrylated polyester was synthesized by 1,4-cyclohexane dimethanol, neopentyl glycol, 1,4-butanediol, maleic anhydride, adipic acid, and acrylic acid. Hybrid films were cured by UV light and the thermal properties, dynamic mechanical properties, and tensile properties of the hybrid films were evaluated as the function of TEOS oligomer content. The morphology of the hybrid films was examined using atomic force microscopy (AFM). The microscopy and dynamic mechanical data indicated that the hybrid films were heterogeneous materials with various inorganic particle sizes dispersed within the organic matrix. The results indicated that after incorporating the TEOS oligomer, the strength and thermal stability of the hybrid films were enhanced.

Nano-Silica Reinforced UV-Curable Hybrid Hard Coatings on Polymethylmethacrylate (PMMA) Substrate

2012 ◽  
Vol 557-559 ◽  
pp. 1797-1802
Author(s):  
Xiao Ying Sun ◽  
Jianan Wang ◽  
Jian Zhong Hang ◽  
Lu Jiang Jin ◽  
Li Yi Shi
Keyword(s):  
Colloidal Silica ◽  
Silica Content ◽  
Hard Coatings ◽  
Hybrid Coatings ◽  
Pmma Substrate ◽  
Coating Films ◽  
Pencil Hardness ◽  
Uv Curable ◽  
Silica Suspension ◽  
Inorganic Components

Hybrid sols were synthesized through a combination of hydrolysis and condensation reactions of tetraetoxysilane and γ-Methacryloxypropyltrimethoxysilane together with the addition of a colloidal silica suspension. A transparent, hard UV-curable hybrid coatings based on hybrid sols were prepared in order to improve the scratch and abrasion resistance of PMMA substrate. The effects of the content of colloidal silica suspension on pencil hardness, transmittance, and haze were investigated. The pencil hardness of all coating films in this study can be tuned from 4H to 9H, whereas that of uncoated PMMA substrate is 1H. The higher hardness of the coatings can be attributed to the dense structure induced by the increase of network density with the addition of colloidal silica suspension. Furthermore, it is found that the transmittance of coatings slightly fluctuates between 91.8% and 93.6% with increasing colloidal silica content. These results indicate the good compatibility of the organic and inorganic components.

Preparation of a Siloxane Acrylic Functional Siloxane Colloid for UV-Curable Organic-Inorganic Hybrid Films

2005 ◽  
Vol 206 (7) ◽  
pp. 732-743 ◽  
Author(s):  
Jianyun He ◽  
Ahmet Nebioglu ◽  
Zhengang Zong ◽  
Mark D. Soucek ◽  
Kathleen M. Wollyung ◽  
...  
Keyword(s):  
Hybrid Films ◽  
Uv Curable ◽  
Inorganic Hybrid

UV-curable organic–inorganic hybrid films based on epoxynorbornene linseed oils

2005 ◽  
Vol 53 (2) ◽  
pp. 83-90 ◽  
Author(s):  
Zhengang Zong ◽  
Jianyun He ◽  
Mark D. Soucek
Keyword(s):  
Hybrid Films ◽  
Uv Curable ◽  
Inorganic Hybrid

UV Curable Organic-Inorganic Hybrid Materials

2000 ◽  
Vol 628 ◽  
Author(s):  
Guang-Way Jang ◽  
Ren-Jye Wu ◽  
Yuung-Ching Sheen ◽  
Ya-Hui Lin ◽  
Chi-Jung Chang
Keyword(s):  
Hybrid Materials ◽  
Colloidal Silica ◽  
Sol Gel ◽  
Solution Ph ◽  
Uv Curable ◽  
Inorganic Hybrid ◽  
Degradation Temperature ◽  
Sol Gel Process ◽  
The Stability ◽  
Thermal Degradation Temperature

This work successfully prepared an UV curable organic-inorganic hybrid material consisting of organic modified colloidal silica. Applications of UV curable organic-inorganic hybrid materials include abrasion resistant coatings, photo-patternable thin films and waveguides. Colloidal silica containing reactive functional groups were also prepared by reacting organic silane and tetraethyl orthosilicate (TEOS) using sol-gel process. In addition, the efficiency of grafting organic moiety onto silica nanoparticles was investigated by applying TGA and FTIR techniques. Experimental results indicated a strong interdependence between surface modification efficiency and solution pH. Acrylate-SiO2 hybrid formation could result in a shifting of thermal degradation temperature of organic component from about 200°C to near 400°C. In addition, the stability of organic modified colloidal silica in UV curable formula and the physical properties of resulting coatings were discussed. Furthermore, the morphology of organic modified colloidal silica was investigated by performing TEM and SEM studies‥

Synthesis and Intermolecularly Mediated Assembly of Organic Pigment in Hybrid Coating Films

1998 ◽  
Vol 519 ◽  
Author(s):  
Y. Yan ◽  
Z. Duan ◽  
D.-G. Chen ◽  
S. Ray Chaudhuri
Keyword(s):  
Sol Gel ◽  
Hybrid Coating ◽  
Hypsochromic Shift ◽  
Hybrid Films ◽  
Coating Films ◽  
Organic Pigment ◽  
Inorganic Hybrid ◽  
Matrix Interactions ◽  
Sol Gel Process

AbstractThe insoluble, strongly hydrogen bonded organic pigment of 3,6-bis-(4-chlorphenyl)-l,4- diketopyrrolo [3,4-c] pyrrole was transiently blocked by adding carbamate groups, and consequently incorporated into organic-inorganic hybrid matrices by a sol-gel process. The homo- (pigment-pigment) and hetero-intermolecular (pigment-matrix) interactions were found to control both the assembly and dispersion of pigment molecules in the hybrid coating films. A weaker interaction between matrices and pigment molecules results in aggregation of the carbamate pigment in the methyl-silicate films. A stronger interaction forms a homogenous dispersion and coloration of the phenyl-silicate films. The as-prepared methyl- and phenylsilicate films doped with the organic pigment were distinguished by a morphology change and a blue (hypsochromic) shift in absorption from 550 to 460 nm. Thermal treatment can remove the carbamate groups and in-situ form the organic pigment in the hybrid films.

Preparation of Poly(Lactic Acid) Acrylate for UV-Curable Coating Applications

2015 ◽  
Vol 659 ◽  
pp. 570-574 ◽  
Author(s):  
Apinya Musidang ◽  
Nantana Jiratumnukul
Keyword(s):  
Lactic Acid ◽  
Physical Properties ◽  
High Efficiency ◽  
Low Energy ◽  
Poly Lactic Acid ◽  
Coating Film ◽  
Pencil Hardness ◽  
Uv Curable ◽  
Low Energy Consumption ◽  
Volatile Organic

UV-curable process is widely used for paints, inks and adhesives due to its rapid curing, low energy consumption, high efficiency and low volatile organic compounds (VOCs). The objective of this research is to prepare poly(lactic acid) (PLA) based UV-curable coating by using glycolyzed PLA. PLA was glycolyzed by ethylene glycol (EG) at 170°C for 90 minutes. The obtained glycolyzed PLA was reacted with methacrylic anhydride (MAAH) to provide PLA acrylate oligomer. The obtained PLA acrylate oligomer was used in coating formulations with various amounts of photoinitiator and cured under UV radiation. Physical properties of cured coating film were investigated such as pencil hardness, gloss and haze. The results showed that poly(lactic acid) (PLA) based UV-curable coating provided good physical properties.

scholarly journals Antimicrobial activity of organic-inorganic hybrid films based on gelatin and organomodified silicones

2018 ◽  
Vol 37 (8) ◽  
pp. 2958-2970 ◽  
Author(s):  
Patrycja Wojciechowska ◽  
Mariusz Tichoniuk ◽  
Daniela Gwiazdowska ◽  
Hieronim Maciejewski ◽  
Marek Nowicki
Keyword(s):  
Antimicrobial Activity ◽  
Hybrid Films ◽  
Inorganic Hybrid

An organic-inorganic hybrid semiconductor for flexible thin film transistor using molecular layer deposition

2021 ◽  
Author(s):  
Seung-Hwan Lee ◽  
Hyun-Jun Jeong ◽  
Ki-Lim Han ◽  
GeonHo Beak ◽  
Jin-Seong Park
Keyword(s):  
Thin Film ◽  
Indium Oxide ◽  
Molecular Layer ◽  
Thin Film Transistor ◽  
Hybrid Films ◽  
Molecular Layer Deposition ◽  
Inorganic Hybrid ◽  
Layer Deposition

Indium oxide and indicone hybrid films consisting of indium oxide and organic aromatic linker are grown by molecular layer deposition (MLD) using bis(trimethylsilyl)amido-diethyl Indium (INCA-1) as the indium precursor, hydrogen...

Sign in / Sign up

Export Citation Format

Share Document