Study on AKD Improves Regenerated Paper Fiber Properties

2011 ◽  
Vol 332-334 ◽  
pp. 1872-1875 ◽  
Author(s):  
Quan Xiao Liu ◽  
Wen Cai Xu ◽  
Yu Bin Lv
Keyword(s):  
Ph Value ◽  
Pulp Fiber ◽  
Modified Starch ◽  
Paper Pulp ◽  
Cationic Starch ◽  
Surface Strength ◽  
Paper Surface ◽  
Fiber Properties ◽  
Amphoteric Starch ◽  
Better Than

AKD is an important internal size for paper pulp fiber. With recycled economy development, regenerated paper fiber becomes an important resource. In this paper, AKD is used as a modification aid by internal sizing method. It shows that the change of the dosage of AKD influences regenerated paper fiber Cobb value, but has no influence to paper surface strength. The proper pH value is from 7 to 9. The temperature has no influence to regenerated paper fiber Cobb value and paper surface strength. Appropriate modified starch is good for AKD modification fiber and increase of the surface strength of paper made from modified fiber by AKD. Amphoteric starch is better than cationic starch. Other added substances such as PEI, MPEI and PAE can improve the modification of paper fiber modified by AKD. So the adsorption of modified paper fiber decrease and the surface strength of paper modified fiber increase.

Research and Application of Retention Agent in Reversible Thermochromism Materials Papermaking

2015 ◽  
Vol 731 ◽  
pp. 452-456
Author(s):  
Xiao Xiu Hao ◽  
Na Wei ◽  
Cheng Sun ◽  
Shu Hui Yang
Keyword(s):  
Retention Rate ◽  
Degree Of Substitution ◽  
Experimental Results ◽  
Pulp Fiber ◽  
Modified Starch ◽  
Cationic Starch ◽  
Optimum Dosage ◽  
Reversible Thermochromism ◽  
High Degree

This paper discusses the effects of different retention agent such as: CPAM, APAM, PAE+CPAM, cationic starch with high degree of substitution and modified starch on the reversible thermochromism materials in anti-counterfeiting paper retention rate, and then determined the optimum dosage of retention agent in the slurry. According to the anti-counterfeit paper color value, the mechanism of reversible thermochromism paper was studied. The experimental results show that when the slurry with retention agent, the reversible thermochromism materials in the anti-counterfeit paper retention increased significantly. This suggests that retention agent in pulp fiber has played the role of bridge and link, thus ensuring the security of reversible thermochromism paper.

Effect of the Enzymatic Hydrolysis on Starch Properties

2015 ◽  
Vol 723 ◽  
pp. 701-704
Author(s):  
Jing Li
Keyword(s):  
Tensile Strength ◽  
Enzymatic Hydrolysis ◽  
Corn Starch ◽  
Modified Starch ◽  
Starch Granules ◽  
Compound Structure ◽  
Starch Properties ◽  
Better Than

In this article, corn starch was modified by α-amylase with different hydrolytic time (30, 60, 90 and 120 min) and the effects of modification technology on its properties of viscosity, compound structure and mechanical were studied. The result showed that structure of modified starch was conserved with hydrolytic time increased, whereas tensile strength were increased and viscosity was decreased. The performance of modified starch that hydrolyzed by 30 min was better than others and pinholes were generated in the surface of starch granules

Impact of acid straightener's pH value in the hair fiber properties

2019 ◽  
Vol 19 (2) ◽  
pp. 508-513
Author(s):  
Alessandra Mari Goshiyama ◽  
Michelli Ferrera Dario ◽  
Cibele Rosana Ribeiro de Castro Lima ◽  
Gabriel Lima Barros de Araújo ◽  
André Rolim Baby ◽  
...  
Keyword(s):  
Ph Value ◽  
Fiber Properties ◽  
Hair Fiber

Preparation and Properties of Multi-Layer Composite Paperboard

2013 ◽  
Vol 774-776 ◽  
pp. 1010-1013
Author(s):  
Quan Xiao Liu ◽  
Dan Xi Li ◽  
Fei Ma ◽  
Chang Qing Chen ◽  
Jun Yang
Keyword(s):  
Wheat Straw ◽  
Raw Materials ◽  
Pulp Fiber ◽  
Paper Pulp ◽  
Mechanical Pulp ◽  
Physical Strength ◽  
Chemical Pulp ◽  
Layer Composite ◽  
Wheat Straw Pulp ◽  
The Cost

In order to study the preparation and property of the multi layer composite paperboard, bleached wheat straw pulp, bleached chemical thermal mechanical pulp and waste newsprint pulp are used as raw materials to making paperboard. The results show that the bonding force between fibers of grasses chemical pulp is strong which can improve the bonding strength between the layers. Bleached wheat straw pulp is used as outer layer and waste news paper pulp is used as inner layer to make composite paperboard has high physical properties. Bleached chemical thermal mechanical pulp fiber is shorter, so paperboard tightness and physical strength reduce, which can be used as the lining of the multi layer composite paperboard to improve the stiffness of the paperboard and reduce the cost.

Study on Dyeing of Lyocell Knitted Fabric with Grape Seed Extract Dyes

2012 ◽  
Vol 550-553 ◽  
pp. 1633-1636 ◽  
Author(s):  
De Ling Chi ◽  
Hu Sheng Yu ◽  
Shan Shan Zhao
Keyword(s):  
Ph Value ◽  
Grape Seed Extract ◽  
Grape Seed ◽  
Seed Extract ◽  
Knitted Fabric ◽  
Light Fastness ◽  
Preparation Temperature ◽  
Dyeing Method ◽  
Dyed Fabric ◽  
Better Than

The natural vegetable dye grape seed extract (GSE) was applied on the direct dyeing of lyocell knitted fabric. By changing the dyeing condition, the modified process was derived after evaluating various fastnesses of the dyed fabric. The direct dyeing method should be under the condition of GSE’s concentration 5g/L, bath preparation temperature 80°C, pH value 3, bath ratio 1:30, dyeing time 60min. The color is very sensitive to pH and GSE’s concentration. The rubbing fastness, washing fastness and light fastness is good, the acid perspiration fastness is better than the alkaline perspiration fastness.

Research on Influence Factors of Bamboo Charcoal Adsorb Ammonia Nitrogen in Wastewater

2011 ◽  
Vol 356-360 ◽  
pp. 493-497 ◽  
Author(s):  
Zong Ning Li ◽  
Zong Qiang Zhu ◽  
Mei Na Liang ◽  
Hong Dong Qin ◽  
Yi Nian Zhu
Keyword(s):  
Ph Value ◽  
Influence Factors ◽  
Ammonia Nitrogen ◽  
Bamboo Charcoal ◽  
Solution Ph ◽  
Adsorption Ability ◽  
Adsorption Time ◽  
Initial Concentration ◽  
Adsorption Temperature ◽  
Better Than

The influences of adsorption temperature, adsorption time, dosing quantity, adsorption environment pH value, initial concentration and bamboo charcoal type on adsorption of bamboo charcoal adsorb ammonia nitrogen in wastewater are studied. The result shows that the maximum adsorption values are 1.1715 mg/g and 0.9115 mg/g respectively at 25°C and 40°C. Bamboo charcoal can easily absorb ammonia nitrogen at low temperature condition. 180 min is a suitable adsorption time. Increasing bamboo charcoal dosing quantity is helpful to improve efficiencies of ammonia nitrogen removal in wastewater, but the adsorption capacity is declining as bamboo charcoal dosing quantity increasing. Solution pH value has a great impact on the adsorbed amount, the adsorbed effect in alkaline solution is much better than in acid one’s. The adsorption ability of the moderate temperature bamboo charcoal is higher than the high temperature one’s.

Investigation into Coating Surface Free Energy and Microstructure of Coated Paper Related to Pigment

2014 ◽  
Vol 884-885 ◽  
pp. 212-215
Author(s):  
Ying Li ◽  
Wen Juan Gu ◽  
Bang Gui He
Keyword(s):  
Free Energy ◽  
Calcium Carbonate ◽  
Surface Free Energy ◽  
Coating Layer ◽  
Physical Structure ◽  
Coated Paper ◽  
Paper Surface ◽  
Pigment Coating ◽  
Printing Ink ◽  
Better Than

The physical structure of coating layer have an important influence on transferring and setting of the printing ink. In this study, the effect of pigment on surface microstructure and surface free energy was investigated. The findings indicated that the pigment affected the pore size, depth and distribution of the coated paper surface. Kaolin pigment compared with calcium carbonate pigment was good to improve the paper surface smoothness. Surface free energy of kaolin pigment coating was higher than calcium carbonate pigment coating, which showed that surface wettability of coating with kaolin pigment was better than calcium carbonate pigment.

Study on Structure of Amphoteric Starch and Its Reinforcing Effect on Secondary Fiber

2011 ◽  
Vol 236-238 ◽  
pp. 1112-1115
Author(s):  
Hong Wei Zhang ◽  
Guo Ping Zheng
Keyword(s):  
Control Sample ◽  
Amorphous Region ◽  
Crystalline Region ◽  
Paper Strength ◽  
Cationic Starch ◽  
Reinforcing Effect ◽  
Dry Process ◽  
Amphoteric Starch ◽  
Reinforcing Effects ◽  
Cationic Reagent

In the presented work, a series of the phosphate amphoteric cassava starch were synthesized by a two-step semi-dry process with 3-chloro-2-hydroxypropyltrimethyl ammonium chloride (CTA) as the cationic reagent and phosphate mixture as the anionic reagent. The structure of the amphoteric starch was characterized by FTIR and XRD. The reinforcing effects of the amphoteric starch on the secondary fiber were also studied. The results indicated that the reaction occurred not only in the amorphous region, but also in its crystalline region. When the cationic starch reacted with different amount of phosphates, the degree of cation substitution (DSc) of products was decreased with the dosage of the phosphates. When cationic starch with different DSc reacted with the same amount of phosphates, the degree of anion substitution (DSa) of products was decreased with the DSc. All the amphoteric starch showed reinforcing effect on the secondary fiber. The No. 7 sample showed better reinforcing effects on paper strength due to its higher total degree of substitution (0.095), proper DSa/DSc ratio (DSc = 0.067, DSa = 0.028) and interior modification of the starch granule. Compared with the control sample, the secondary fiber paper with 1.0 wt % (relative to dried pulp) of 7# modified starch showed 23.5%, 20.3% and 29.4% increases in tensile index, tearing index, and burst index, respectively.

scholarly journals Adsorption Equilibrium of a Herbicide (Pendimethalin) onto Natural Clay

2005 ◽  
Vol 23 (6) ◽  
pp. 437-453 ◽  
Author(s):  
M.S. El-Geundi ◽  
T.E. Farrag ◽  
H.M. Abd El-Ghany
Keyword(s):  
Particle Size ◽  
Adsorption Capacity ◽  
Ph Value ◽  
Maximum Adsorption Capacity ◽  
Natural Clay ◽  
Freundlich Model ◽  
Adsorption Data ◽  
Effect Of Particle Size ◽  
System Variables ◽  
Better Than

The equilibrium adsorption of a herbicide (pendimethalin) onto natural clay from aqueous solutions was studied experimentally using different system variables. The influence of such variables, such as particle size (dp), pH and temperature, on the adsorption capacity was studied. Equilibrium modelling was carried out using the Langmuir, Freundlich and Redlich—Peterson models with the corresponding constants being calculated for the different system variables. The results indicate that the maximum adsorption capacity (qmax) at an acidic pH value (3.44) was approximately double that observed at an alkaline pH value (9.62). It was also found that the effect of particle size was significant and that the temperature plays an interesting role in the adsorption process. The enthalpy change (ΔH) for adsorption was evaluated as −29.36 kJ/mol. It is clear from the results of this study that the Freundlich model fitted the experimental adsorption data significantly better than the Langmuir or the Redlich—Peterson models.

Sign in / Sign up

Export Citation Format

Share Document