Preparation and Magnetic Property Study of Ni-P/Palygorskite Core-Shell Linear Powder

2012 ◽  
Vol 427 ◽  
pp. 92-97
Author(s):  
Su Min Zhou ◽  
Wei Huang ◽  
Shi Ming Shen
Keyword(s):  
Magnetic Property ◽  
Core Shell ◽  
Vibrating Sample Magnetometer ◽  
X Ray ◽  
Acid Bath ◽  
Morphology And Structure ◽  
Silicate Clay ◽  
Xrd Patterns ◽  
Aluminium Silicate ◽  
Scanning Electron

Alygorskite is a kind of hydrated magnesium aluminium silicate clay mineral. A novel linear core-shell structured Ni-P coated micro-fiber palygorskite (MFP) was fabricated via an electroless plating process in acid bath. The composition, morphology and structure of the as-prepared products were characterized by the techniques such as powder X-ray diffra-ction (XRD), energy-dispersive X-ray spectrum (EDS), and scanning electron microscopy (SEM). The Magnetic Property of the powders was conducted from a vibrating sample magnetometer (VSM). It was observed that the MFPs surface was compactly coated with irregular Ni-P particle. The XRD patterns indicate the amorphous Ni-P microstructure of coating. Magnetic properties show that coated MFPs are ferromagnetic materials. The satura-tion magnetization (σs) and coercivity (jHc) of the powders are 13.86emu/g and 43.97 Oe respectively.

Synthesis of NaFeS2 Nanorods by Solvothermal Technique

2013 ◽  
Vol 774-776 ◽  
pp. 603-608 ◽  
Author(s):  
Feng Huang ◽  
Rong Wu ◽  
Jin Li ◽  
Yan Fei Sun ◽  
Ji Kang Jian
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Magnetic Property ◽  
Electron Microscope ◽  
Powder Diffraction ◽  
Vibrating Sample Magnetometer ◽  
X Ray ◽  
Solvothermal Technique ◽  
Transmission Electron ◽  
Scanning Electron

Ternary NaFeS2nanorods were synthesized by solvothermal technique from Fe2O3and Na2S2O3·H2O in ethylenediamine (en) solvent. The phase, morphology, microstructure and magnetic property of the nanorods were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscope and vibrating sample magnetometer. The possible growth mechanism of NaFeS2nanorods was discussed.

Study on optical and magnetic properties of FexNi1-xMn2O4 materials

2021 ◽  
Vol 66 (1) ◽  
pp. 57-64
Author(s):  
Hang Pham Vu Bich ◽  
Yen Nguyen Hai ◽  
Mai Phung Thi Thanh ◽  
Dung Dang Duc ◽  
Hung Nguyen Manh ◽  
...  
Keyword(s):  
Single Phase ◽  
Sol Gel ◽  
Vibrating Sample Magnetometer ◽  
Raman Scattering Spectrum ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scattering Spectrum ◽  
Diffraction Diagram ◽  
Optical And Magnetic Properties ◽  
Scanning Electron

In this study, we present the process of synthesis FexNi1-xMn2O4 (x = 0; 0.1; 0.3; 0.5; 0.7; 0.9; 1) by method sol-gel. Scanning electron microscope results shows that the particle size is about 50 nm. The X-ray diffraction diagram shows that the samples are single phase, changing structure clearly as the x ratio increases from 0 to 1. The lattice constant, the bond length also changes with x-value as shown on the Raman scattering spectrum. The results of the vibrating sample magnetometer show that the magnetism of the material FexNi1-xMn2O4 changes with the value of x and reaches a maximum in the range x from 0.5 to 0.7.

scholarly journals FTIR and Optical Properties of NiO Doped Cr2O3 Nanopar-ticles Synthesis by Hydrothermal Method

2018 ◽  
Vol 29 (1) ◽  
pp. 168
Author(s):  
Tunis Balassim Hassan
Keyword(s):  
Optical Band Gap ◽  
Average Crystallite Size ◽  
Structural Behavior ◽  
X Ray Diffraction ◽  
Nanopar Ticles ◽  
Hydrothermal Technique ◽  
X Ray ◽  
Cr2o3 Nanoparticles ◽  
Xrd Patterns ◽  
Scanning Electron

Pure and Nickel oxide doped chromium (III) oxide (Cr2O3) nanoparticals are synthesized by hydrothermal technique. The effect of dopant Ni concentration on the structural behavior of Cr2O3 nanoparticles was examined by X-ray diffraction. The average crystallite size of the synthesized nanoparticles was measured from XRD patterns using Scherrer equation and was decreased from 22nm to 12.9 nm with the increasing Nio concentration in Cr2O3 from (0, 0.01, 0.06, and 0.10). Morphologies and compositional elements of the synthesized nanoparticles were observed by the field emission scanning electron microscopy (FESEM) and energy dispersive X-ray (EDX) spectroscopy, respectively. The optical property of the samples was measured by ultraviolet - visible (UV-Vis.) absorption spectroscopy. The observed optical band gap value ranges from 2.3eV to 2.5eV for Ni doped nanoparticles

SIZE-INDUCED EFFECTS IN NANOSTRUCTURED NiFe2O4

2010 ◽  
Vol 24 (30) ◽  
pp. 5973-5985
Author(s):  
M. GUNES ◽  
H. GENCER ◽  
T. IZGI ◽  
V. S. KOLAT ◽  
S. ATALAY
Keyword(s):  
Electron Microscopy ◽  
Annealing Temperature ◽  
Structural Parameters ◽  
Hydrothermal Process ◽  
Lattice Parameter ◽  
Effect Of Temperature ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

NiFe 2 O 4 nanoparticles were successfully prepared by a hydrothermal process, and the effect of temperature on them was studied. The particles were annealed at various temperatures ranging from 413 to 1473 K. Studies were carried out using powder X-ray diffraction, scanning electron microscopy, infrared spectroscopy, differential thermal analysis, thermogravimetric analysis and a vibrating sample magnetometer. The annealing temperature had a significant effect on the magnetic and structural parameters, such as the crystallite size, lattice parameter, magnetization and coercivity.

scholarly journals Evolution of the Structural and Magnetic Properties of Bulk Fe61Co10B20W1Y8−XPtx Alloys through the Partial Substitution of Pt for Y

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4962
Author(s):  
Pawel Pietrusiewicz ◽  
Marcin Nabiałek ◽  
Bartłomiej Jeż
Keyword(s):  
Magnetic Properties ◽  
Small Addition ◽  
Partial Substitution ◽  
Vibrating Sample Magnetometer ◽  
Chemical Formula ◽  
X Ray ◽  
Saturation Magnetisation ◽  
Structural And Magnetic Properties ◽  
Structural Research ◽  
Scanning Electron

This paper presents the results of an investigation into rapidly quenched Fe-based alloys with the chemical formula: Fe61Co10B20W1Y8−xPtx (where x = 3, 4, 5). In these alloys, a small quantity of Pt was added, and the Y content was reduced concurrently. Samples of the aforementioned alloys were injection-cast in the form of plates with the dimensions: 0.5 mm × 10 mm × 10 mm. The resulting structure was examined using X-ray diffractometry (XRD), Mössbauer spectroscopy and scanning electron microscopy (SEM). The results of the structural research reveal that, with a small addition of Pt, areas rich in Pt and Y are created—in which Fe-Pt and Pt-Y compounds, with different crystallographic systems, are formed. It has also been shown that an increase in Pt content, at the expense of Y, contributed to the formation of fewer crystalline phases, i.e., it allowed a material with a more homogeneous structure to be obtained. Magnetic properties of the Fe61Co10B20W1Y8−xPtx (where x = 3, 4, 5) alloy samples were tested using a vibrating sample magnetometer (VSM). The magnetic properties of the investigated materials revealed that the saturation magnetisation increased with increasing Pt content, at the expense of Y. This effect is due to the occurrence of different proportions of crystalline magnetic phases within the volume of each alloy.

CORE-SHELL Zn/ZnO STRUCTURES WITH IMPROVED PHOTOCATALYTIC PROPERTIES SYNTHESIZED BY AQUEOUS SOLUTION METHOD

2013 ◽  
Vol 06 (06) ◽  
pp. 1350058 ◽  
Author(s):  
YUAN MING HUANG ◽  
QING-LAN MA ◽  
BAO-GAI ZHAI
Keyword(s):  
Aqueous Solution ◽  
Photocatalytic Activity ◽  
Solution Method ◽  
Core Shell ◽  
Green Method ◽  
X Ray ◽  
The Core ◽  
Semiconductor Junction ◽  
Aqueous Solution Method ◽  
Scanning Electron

A facile and green method was utilized to synthesize core-shelled Zn / ZnO microspheres by boiling Zn microparticles in water for improving the photocatalytic activity of ZnO . The synthesized Zn / ZnO core-shells were investigated by means of scanning electron microscope, X-ray diffractometer and photoluminescence spectrometer, respectively. The morphology analysis showed that the metallic Zn core was about 6 μm in diameter while the ZnO shell was about 600 nm in thickness. Compared to ZnO nanoparticles, the core-shelled Zn / ZnO microspheres exhibited improved photocatalytic activity in degrading methyl orange in water. Our results suggest that the metal–semiconductor junction formed at the Zn / ZnO interface is responsible for the enhanced photocatalytic activity of ZnO .

scholarly journals Crosslinked sulfonated polyacrylamide (Cross-PAA-SO3H) tethered to nano-Fe3O4 as a superior catalyst for the synthesis of 1,3-thiazoles

BMC Chemistry ◽  
2019 ◽  
Vol 13 (1) ◽  
Author(s):  
Hossein Shahbazi-Alavi ◽  
Sheida Khojasteh-Khosro ◽  
Javad Safaei-Ghomi ◽  
Maryam Tavazo
Keyword(s):  
Fourier Transform ◽  
Phenacyl Bromide ◽  
Vibrating Sample Magnetometer ◽  
Synthetic Route ◽  
One Pot ◽  
X Ray ◽  
Ft Ir ◽  
Sulfonated Polyacrylamide ◽  
Nano Fe3o4 ◽  
Scanning Electron

Abstract Crosslinked sulfonated polyacrylamide (Cross-PAA-SO3H) attached to nano-Fe3O4 as a superior catalyst has been used for the synthesis of 3-alkyl-4-phenyl-1,3-thiazole-2(3H)-thione derivatives through a three-component reactions of phenacyl bromide or 4-methoxyphenacyl bromide, carbon disulfide and primary amine under reflux condition in ethanol. A proper, atom-economical, straightforward one-pot multicomponent synthetic route for the synthesis of 1,3-thiazoles in good yields has been devised using crosslinked sulfonated polyacrylamide (Cross-PAA-SO3H) tethered to nano-Fe3O4. The catalyst has been characterized by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), dynamic light scattering (DLS), X-ray powder diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), thermogravimetric analysis (TGA) and vibrating-sample magnetometer (VSM).

The Effect of Alcoholic Reducing Agent on Morphology and Structure of VO2 (B) Nano-Particles

2011 ◽  
Vol 306-307 ◽  
pp. 1225-1228 ◽  
Author(s):  
Ji Qi ◽  
Chen Niu
Keyword(s):  
Cetyltrimethylammonium Bromide ◽  
Raw Materials ◽  
Thermal Reduction ◽  
Nano Particles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Morphology And Structure ◽  
Properties Of Materials ◽  
Scanning Electron

Vanadium dioxides (VO2) is synthesized by hydrothermal method. In this process,V2O5 powder is used as raw materials,cetyltrimethylammonium bromide (CTAB) is used as template and different alcohols such as methanol, ethanol, propanol and butanol are used as reductants. X-ray diffraction (XRD) and scanning electron microscopy (SEM) are used to test the properties of VO2 nanoparticles. The results show that VO2(B) nano-particles were succsessfully synthesized under the conditions of thermal reduction temperature 180°C, reaction time 24h and drying temperature 60°C. The variety of alcoholic reducing agents plays an important role in the structure and morphology of the product VO2(B), which relates closly to the electric properties of materials.

The Effects of Ternary Elemental Additions on the Structure and Magnetic Properties of Nanocrystalline Feco Powders

2002 ◽  
Vol 753 ◽  
Author(s):  
I. Baker ◽  
R. G. Quiller ◽  
M. Robson ◽  
D. Wu
Keyword(s):  
Magnetic Properties ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Grain Sizes ◽  
Before And After ◽  
Diffraction Peaks ◽  
Computer Controlled ◽  
Steel Balls ◽  
Scanning Electron

ABSTRACTPowders of near-equiatomic Fe and Co were mechanically milled with additions of Zr, C, Ni, Cu and/or B for 60 hr using stainless steel balls in a Svegari attritor operated at 1300 r.p.m. under argon. The milled powders were examined before and after annealing at 600 °C. The morphologies and sizes of the powders were examined using a scanning electron microscope. The grain sizes were characterized from the widths of X-ray diffraction peaks obtained using a computer-controlled x-ray diffractometer and the lattice parameters were determined. The resulting magnetic properties were measured using a vibrating sample magnetometer.

Preparation of Hollow Nickel Ferrite Microspheres and their Magnetic Properties

2014 ◽  
Vol 1035 ◽  
pp. 488-491
Author(s):  
Jing Jing Li ◽  
Yun Zhao ◽  
Han Sheng Li ◽  
Qin Wu ◽  
Qing Ze Jiao
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Nickel Ferrite ◽  
Room Temperature ◽  
Solvothermal Method ◽  
Magnetization Measurement ◽  
Vibrating Sample Magnetometer ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Hollow nickel ferrite microspheres with a diameter of about 1.5 to 2.5 μm were synthesized using an emulsion-based solvothermal method in combination with calcination at 550°C. The structures and morphologies of the nickel ferrite microspheres were characterized using an X-ray diffractometer, a transmission electron microscopy and a field emission scanning electron microscopy. Magnetization measurement was carried out using a vibrating sample magnetometer at room temperature. The saturation magnetization and coercivity of nickel ferrite microspheres could reach 19.41 emu/g and 202.28 Oe, respectively. Hollow nickel ferrite microspheres might be used as catalysts, magnetic materials and microwave absorbers.

Sign in / Sign up

Export Citation Format

Share Document